Standard Abrasives Buff and Blend HS Flap Brush 875371 14" x 1-1/2" x 8" FB119 23-11 HD A MED (Made to order)

Standard Abrasives Buff and Blend HS Flap Brush 875371 14" x 1-1/2" x 8" FB119 23-11 HD A MED

Designed to utilize the material face rather than the edge, Standard Abrasives Buff and Blend HS Flap Brush helps achieve fine finishes without leaving lines on the workpiece. The high strength (HS) material makes it an ideal choice for blending, cleaning, deburring and finishing on stainless steel, brass and aluminum, especially where uniform and long line brushed finishes are desired.

Quality Materials Well-Suited for Deburring and Finishing Irregular-Shaped Parts Our Buff and Blend High Strength products are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. The durable high strength construction of Standard Abrasives Buff and Blend HS Flap Brush provides aggressive action for the toughest applications and provides greater tear resistance, perfect for deburring or final finishing on irregularly shaped parts. Tough, non-woven Buff and Blend HS material allows removing surface contaminants without eliminating critical detail or gouging the workpiece. Choose from a broad offering of sizes, densities and grades to suit many different finishing operations.

Medium Grade Brush Suits Decorative and In-Line Applications When a very fine high luster and decorative finish is desirable on pieces such as builders hardware, the HS Brush in MED grade provides the conformability you need.

The Buff and Blend HS Flap Brush is an ideal choice for:

• A grain finish on brass strike plates for door hardware
• A satin finish on builders' hardware (cabinet handles, door knobs, and more)
• Satin finishes on soft metals
• Highlighting and finishing aluminum extrusions (used as a quality control tool to identify defects)
• Inline brushed finishes on aluminum and stainless cookware (pots and pans)
• Producing fine scratch patterns on utensils and cutlery prior to cotton buff and compound polishing
• Removing oxide from precious metals

Featuring Consistent Finishes and Operator Comfort Flap brushes produce a consistent finish which does not reflect lines commonly attributed with ganged arbor hole discs. Density, pressure and angle determine the ability of the flap brush to remove burrs, oxidation and handling marks. The abrasive brush material provides ventilation which helps dissipate heat and, therefore, runs cooler. This provides consistent finishes without smearing or otherwise discoloring the work piece. Minimal vibration can reduce chattermarks on the workpiece and can lead to less operator and machine fatigue.

Load-Resistant Construction Boosts Life and Performance Standard Abrasives Buff and Blend products are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.