Osborn ATB Flexible Honing Tool (26.9mm 1.06” Hole X 240 SC) # 77257
Applications: Brake cylinders, hydraulics, valve guides
Osborn NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments. This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool. ATB Flexible Honing Tools will even provide an "edge break" not possible with conventional honing stones.
$50.22 Per Piece
- Buy More & Save More
- Sold in packages of 12 pieces
- Buy 1 for $602.69 per package ($50.22 per piece)
- Save 3% – Buy 2+ for $583.85 per package ($48.65 per piece)
- Bulk discount reflected in cart.
Description
Osborn ATB Flexible Honing Tool (26.9mm <1.06”> HOLE X 240 SC)# 77257
Tech Specs
| AA Item# | 622424772570 |
|---|---|
| Manufacturer: | Osborn Wire Brush |
| Osborn Wire Brush Part# | 77257 |
ATB Novoflex Instructions:
- Choose the Flexible Honing Tool for the specific hole size. The actual NovoFlex tool will be approximately 10% larger than the hole size.
- Use 10-30 weight oil for honing lubrication, when honing hydraulic brake cylinders, use hydraulic brake fluid as a honing lubricant.
- Have the NovoFlex Flexible Honing Tool rotating upon entry and removal from the bore.
- Recommended RPM range for the NovoFlex Tool is 100 to 1200 RPM, based on the brush diameter. Air tools are not recommended.
- Use 60-120 strokes per minute depending on the RPM. Final stroking may be accelerated to develop a 45° cross-hatch angle.
- Honing time should be 20/45 seconds per bore.
- Do not use solvents for honing or cleaning.
- Clean cylinders after honing with warm or hot water and detergent using an Osborn plain nylon brush, and then lightly oil the bore.






