An abrasive flap disc can help you grind and finish metal surfaces with one tool attachment. Flap discs grind like a depressed center wheel and finish like a fiber sanding disc – helping you reduce process time and lower your total grinding costs.

Technically speaking, Type 27 Flat flap discs have a flat flap design and provide the best finish. These tend to be the most popular and commonly used. Type 27 Flap Discs are used primarily on flat surfaces they grind at flatter angles 0° to 15°.
 
Type 29 Conical flap discs are the more aggressive choice, with flaps angled at 10°. The angle provides greater surface contact. A Type 29 flap disc can be used on both irregular and flat surfaces and grinds at steep angles 15° to 25°.
 
Choose a Type 29 angled flap disc for faster stock removal. An angled edge can be used with a vertical or horizontal grinder. And with the angled edge, more of the abrasive disc contacts the metal surface, helping you strip and finish in less time.
 
Flap discs are most commonly used on right angle grinders and vertical shaft portable grinders. You may be using a tool like the Walter 30A161 4-1/2" Right Angle Grinder or a Dynabrade 53232 Vertical Depressed Center Wheel Grinder.
 
We only offer high quality flap discs because we have found that poor quality flap discs on the market tend to “chatter” during the grinding process and generate vibrations.  This can result in the grit pulling away from the mounting prematurely giving you irregular grinding, poor grinding capacity, short service life and potential flap tearing. AA Abrasives Flap Discs are made with premium zirconia alumina grain on a phenolic backing. Zirconia-alumina is best for medium to heavy material removal. The grains fracture with use to produce new sharp edges. Flap discs made from zirconia-alumina are commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings and some stainless steels. We also offer the increasingly popular, Premium Ceramic Flap Discs if needed. These flap discs are made in the USA.
 
If you use flap discs - try our high quality flap disc line.  Our most popular flap discs are the Zirconium in 4-1/2" and 7" with a 7/8" arbor hole.
 

AA Abrasives Zirk Flap Discs with 7/8" Arbor Hole
 
51417 - Flap Discs 4-1/2" x 7/8" Type 27 TruZirk 36 Grit
51435 - Flap Discs 4-1/2" x 7/8" Type 27 TruZirk 60 Grit
51441 - Flap Discs 4-1/2" x 7/8" Type 27 TruZirk 80 Grit
 
51501 - Flap Discs 7" x 7/8" Type 27 TruZirk 36 Grit
51519 - Flap Discs 7" x 7/8" Type 27 TruZirk 60 Grit
51525 - Flap Discs 7" x 7/8" Type 27 TruZirk 80 Grit
 
51155 - Flap Discs 4-1/2" x 7/8" Type 29 Zirk 36 Grit
51173 - Flap Discs 4-1/2" x 7/8" Type 29 Zirk 60 Grit
51179 - Flap Discs 4-1/2" x 7/8" Type 29 Zirk 80 Grit
 
51239 - Flap Discs 7" x 7/8" Type 29 Zirk 36 Grit
51257 - Flap Discs 7" x 7/8" Type 29 Zirk 60 Grit
51263 - Flap Discs 7" x 7/8" Type 29 Zirk 80 Grit
 
A 5/8"-11 arbor hole on a flap disc offers quick mounting and unmounting on angle grinders. If you have need for flap discs with a 5/8-11 arbor hole
 
AA Abrasives Zirc Flap Discs with a 5/8"-11 Arbor Hole
 
52381 - Flap Discs 4-1/2" x 5/8-11 Type 27 Zirc 36 Grit
52399 - Flap Discs 4-1/2" x 5/8-11 Type 27 Zirc 60 Grit
 
52465 - Flap Discs 7" x 5/8-11 Type 27 Zirc 36 Grit
52483 - Flap Discs 7" x 5/8-11 Type 27 Zirc 60 Grit
 
52161 - Flap Discs 4-1/2" x 5/8-11 Type 29 Zirc 36 Grit
52179 - Flap Discs 4-1/2" x 5/8-11 Type 29 Zirc 60 Grit
52185 - Flap Discs 4-1/2" x 5/8-11 Type 29 Zirc 80 Grit
 
52245 - Flap Discs 7" x 5/8-11 Type 29 Zirc 36 Grit
52263 - Flap Discs 7" x 5/8-11 Type 29 Zirc 60 Grit
 

Shop our webstore to view our full line of abrasives and industrial power tools. Our webstore is open 24/7 and we are available by phone M-F 8 - 5 EST at 1-800-888-1802