3M™ Fastbond™ Contact Adhesive 30NF Green
3M™ Fastbond™ Contact Adhesive 30NF, Green, 1 Quart Can, 12/case
3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.
$53.50 Per Piece
Description
3M™ Fastbond™ Contact Adhesive 30NF, Green, 1 Quart Can, 12/case
We designed 3M™ Fastbond™ Contact Adhesive 30NF to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern.
Recommended Applications
- Most formed plastics
- Plastic laminate
- Wood
- Plywood
- Wood veneer
- Canvas
High Immediate Strength, Long Bonding Range
Formulated to be a fast-acting solution, 3M™ Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
3M™ is a trademark of the 3M Company.
Tech Specs
| AA Item# | 7100017732 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00021200211850 |
3M™ 7100017732 Product Information Page - pdf
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
