3M™ 7100231753 5 x NH A/O Very Fine Scotch-Brite™ Production Clean and Finish Disc
3M™ 7100231753 5 x NH A/O Very Fine Scotch-Brite™ Production Clean and Finish Disc
Our Scotch-Brite™ Production Clean and Finish Disc delivers high cut, long life, a fine finish, and is effective for conditioning aluminum, stainless steel, plastics, wood, and fiberglass. The disc is designed for fine finishing, paint prepping, and scratch blending, and conforms well to irregular surfaces for a clean, consistent finish without undercutting or damaging the base material.
$3.08 Per Piece
Description
3M™ Scotch-Brite™ Production Clean and Finish Disc 7100231753
5 x NH A/O Very Fine PR-DC
Product Features:
- Available in very fine grade aluminum oxide for moderate cleaning and surface finishing
- Reinforced fiber construction make this disc more durable than our standard Scotch-Brite™ Clean and Finish Disc
- High cut-rate provides fine finishing, blending, polishing, paint prepping, and scuffing on a wide variety of surfaces
- Provides proper finish for scuffing primer, metal, and solid surfaces
- Non-woven 3D structure provides long life and consistent finishes
- Non-woven, open-web construction runs cool and resists loading to provide a consistent level of abrasive conditioning over the life of the disc
Dense Disc Produces Fine Finish on Solid Surfaces
Our Scotch-Brite™ Production Clean and Finish Disc is engineered to achieve a fine finish on solid surfaces, painted panels, and other materials. Non-woven, open-web runs cool and resists loading to provide a consistent level of abrasive conditioning over the life of the disc. Compared to our standard Scotch-Brite™ Clean and Finish Disc, this Production disc is denser and more resistant to tearing.
We manufactured the Scotch-Brite™ Production Clean and Finish Disc using Very Fine grade aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
The Scotch-Brite™ Advantage
Non-woven technology makes our Scotch-Brite™ abrasives unique. We intersperse abrasive mineral on synthetic fibers using resin – creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not get worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish – part after part.
3M™ is a trademark of the 3M Company.
Tech Specs
| AA Item# | 7100231753 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00689330198986 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e. g. , U. S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
