3M™ 7100224016 8 x 2 x 1 P240 Grit X-wt 341D Flap Wheel
3M™ 7100224016 Flap Wheel 341D 8 x 2 x 1 P240 Grit X-wt F620
Our 3M™ Flap Wheel 341D is a versatile wheel built with aluminum oxide mineral on a durable X-weight cloth backing. This small-diameter flap wheel comes with an integrated threaded mandrel and mounts to a die grinder for blending, descaling, deburring or setting a grain.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$93.22 Per Piece
Description
3M™ 341D Flap Wheel 7100224016 8 x 2 x 1 P240 Grit X-wt F620
Cloth Bands Features:
- Cost-effective solution for a wide variety of applications
- Flexing characteristics of flaps respect contours and irregular surfaces
- Flap wheels are easy to use, less dependent on operator skill
- Threaded spindle mount for easy attachment
Flap Wheel Engineering
Our 3M™ Flap Wheel 341D is engineered by arranging hundreds of tightly, evenly packed, overlapping abrasive cloth flaps radially around a hub. Each flexible flap on our 3M™ Flap Wheel 341D is covered with sharp-cutting aluminum oxide mineral bonded with resin. Mounted to a die grinder or flexible shaft tool, the flaps rotate centrifugally making continuous contact with the workpiece. As the flap wears away, new abrasive grain is exposed and the wheel continues to cut.
The flexible nature of the flaps make it highly conformable to surface contours and irregularities. Flap wheels are far less likely to gouge or mar the work surface. And the forgiving quality of this abrasive wheel allows even inexperienced operators to obtain professional results.
The 3M™ Flap Wheel 341D is available in 1-, 2 - and 3-inch diameters. A T84 threaded mandrel is attached to at the center of each wheel. The T84 mandrel has a 1/4-20 inch thread that screws into our 81A wheel adapter kit to attach the flap wheel to your power tool. Quickly spin the wheels on and off. No special tools are needed. Maximum RPMs are 20,000 for the 3-inch wheel, 25,000 for the 2-inch wheel and 30,000 for 1-inch wheel.
Recommended Applications
The 341D flap wheel is typically used on a die grinder to set a linear finish or set a scratch on stainless steel and other substrates. It is also used to deburr tube or pipe internal and outer diameters and for small or hard-to-reach areas where larger flap wheels are too big or cumbersome.
A Portfolio of Abrasive Systems Solutions
From specialty abrasives designed for a highly specific purpose to versatile, jack-of-all-trades sheets, you can find an abrasive tool to accomplish your task or perfect your system. At 3M, we draw from a wealth of original technologies and breakthrough inventions to provide a broad portfolio of abrasives that shape, finish and polish with ease and precision.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100224016 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060761038 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
