3M™ 7100206590 1 x 18-15/16 A-MED Scotch-Brite™ SL Surface Conditioning Belt
3M™ 7100206590 Scotch-Brite™ SL Surface Conditioning Belt - 1 x 18-15/16 A-MED
Scotch-Brite™ SL Surface Conditioning Belt is a durable, aggressive non-woven belt that balances flexibility with aggressive cutting action.
$13.24 Per Piece
Description
3M™ Scotch-Brite™ SL Surface Conditioning Belt 7100206590 - 1 x 18-15/16 Aluminum Oxide Medium
Product Features:
- Aluminum Oxide mineral, available in a range of grades, cuts sharp and leaves a fine finish
- For use on backstand and off hand equipment
- Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Aggressive cutting without gouging, removes surface imperfections, grind lines, mill and other marks
The reinforced backing on Scotch-Brite Surface Conditioning Belts offers good flexibility whether working on a file belt or backstand. All belts may be used for “low stretch” applications, because, while flexible, they also stay taut and firm.
Scotch-Brite™ SL Surface Conditioning Belt uses coarse grade aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing.
Surface conditioning belts are used for rapid grinding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog with debris and quickly become less efficient. Belts continue to sand without clogging, because small grooves in the abrasive belt open as they go around the arc of the drive wheel. Scotch-Brite™ Surface Conditioning Belts present a swift and efficient means to achieve desired finishes.
Tech Specs
| AA Item# | 7100206590 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060726020 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
