3M™ 7100196620 2.75 x 50 yds P180 Grit 255L Stikit™ Gold Film Roll
3M™ 7100196620 Stikit™ Gold Film Roll 2.75 x 50 ydss P180 Grit 255L
$226.83 Per Piece
Description
3M™ Stikit™ 7100196620 2.75 x 50 yds P180 Grit 255L Stikit™ Gold Film Roll
Sanding Product Features:
- 3M™ Stikit™ adhesive backing allows for quick application and easy removal
- Aluminum oxide abrasive offers a fast cut, long life, and professional performance on many surfaces
- Tear-resistant film backing provides a close-tolerance, consistent finish
- Open coat construction provides a more aggressive cut
- Load-resistant coating prevents dust and debris from clogging the surface
3M™ Stikit™ pressure sensitive adhesive backing provides ease of attachment and a clean, residue-free removal. The open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, and its load-resistant coating reduces clogging, making this a good choice for woodworking and other applications where loading hinders performance. 3M™ Stikit™ Gold Film Roll 255L comes in a range of grades for fine sanding and finishing, and is resin-bonded for reliable performance under high heat and pressure.
Aluminum Oxide Abrasive Offers a Fast Cut, Long Life, and Professional Performance
This abrasive uses aluminum oxide, which is a popular choice among industrial professionals because of its fast cut-rate and long life. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Open Coat Construction Prevents Dust and Debris from Clogging the Surface
Coated abrasives cut better and last longer when dust isn't clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are placed with space between them to help evacuate sanding dust and other debris to avoid clogging the cutting edge of the grains. The load-resistant coating also allows the product to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog and hinder sanding ability. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. All of this adds up to increased productivity and reduced material consumption.
3M™ Stikit™ Backing Allows for Quick Application and Easy Removal
These high-quality, coated abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so attaching to your disc pad is simple. And because the adhesive is pressure sensitive, the disc can be peeled off of the disc pad just as easily, leaving a clean surface for your next disc.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100196620 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060393284 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
