3M™ 7100170712 1 x 1-1/2 Scotch-Brite™ Clean and Finish Sheet
3M™ 7100170712 Scotch-Brite™ Clean and Finish Sheet 1 x 1-1/2
Scotch-Brite™ Clean and Finish Sheet uses a conformable non-woven web and a variety of mineral types to blend, clean, and finish. It also works well for contour finishing and lacquer finishing and polishing. The sheet is flexible, making it effective for getting into hard-to-reach areas to produce a uniform finish.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$0.21 Per Piece
Description
Scotch-Brite™ 7100170712 1 x 1-1/2 Scotch-Brite™ Clean and Finish Sheet
Sanding Product Features:
- Abrasive mineral adhered to non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
- Can be used with polishing compounds to create a gloss finish on wood
- Conformable pad gets into corners and over contoured surfaces to produce a uniform finish
- Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces
- Open web construction resists loading and rinses clean for repeated use
3M™ is a trademark of the 3M Company
The soft abrasive mineral effectively cleans, blends, and conditions metals, wood, composites, and advanced surfaces and is also effective for paint prep.
Applications where our Scotch-Brite™ Clean and Finish multi-use sheets are useful include cabinetry, custom woodworking and millwork, furniture, metal fabrication, primary wood and panel processing. Washable and reusable, this non-woven, open-web sheet resists loading to continuously provide consistent conditioning properties throughout the life of the product. Convenient 6 x 9 inch sheet may be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander for large area coverage.
Scotch-Brite™ Clean and Finish Sheets are available with silicon carbide, aluminum oxide, or talc abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications.
Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100170712 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060054550 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
