3M™ 7100166057 2 x 118 60+ Grit YF-wt 981F Cubitron™ II Cloth Belt
3M™ 7100166057 Cubitron™ II Sanding Belt 2 x 118 60+ Grit YF-wt 981F
This 3M™ item is discontinued. Contact us for possible alternatives at 1-800-888-1802.
$10.39 Per Piece
Description
3M™ Cubitron™ II Cloth Belt 7100166057 2 x 118 60+ Grit YF-wt 981F
Sanding Belt Features:
- Designed specifically for grinding on soft metal substrates like aluminum, brass and bronze
- 3M Precision-Shaped Grain cuts exceptionally fast for grinding and finishing on soft metals
- Integrated dry lubricant reduces loading when grinding soft metals
- Strong mineral adhesion for reduced shelling when grinding on the edge of the belt
- Tough, Y-weight polyester cloth backing holds up to finishing and aggressive grinding
- Water-resistant polyester material can be used with liquid coolants to reduce grinding temperatures
- Durable resin bonding resists deterioration from heat, extending the life of the abrasive cloth
Solving the Challenges of Soft Metals
3M™ Cubitron™ II Cloth Belt 981F is designed to solve three common problems associated with grinding and finishing aluminum and other soft metals: abrasive loading, edge-shelling and operator fatigue.
To help reduce loading when working with aluminum, bronze and brass, a dry lubricant is integrated into the abrasive and allows the abrasive grain to be relatively free from metal coating them, allowing the cutting surface of the mineral to remain effective. The waterproof backing also enables the user to rinse areas of the workpiece and the cloth during use, in case the abrasive begins to clog.
To help prevent edge-shelling, our 3M™ Cubitron™ II Cloth Belt 981F features a durable, Y-weight polyester cloth backing that stands up to the stresses of working on gates, parting lines and flashing in tight spaces. Plus, unlike other cloth grinding belts, ours features a proprietary resin system to improve mineral adhesion, further reducing the chances of shelling.
Worker fatigue can be a concern when grinding softer substrates. 3M™ Cubitron™ II Cloth Belt 981F grinds efficiently, and 3M Precision-Shaped Grain can allow the operator to cut with less pressure, which may help to reduce physical exertion on an operator.
3M™ is a trademark of the 3M Company.
Tech Specs
| AA Item# | 7100166057 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060054994 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended,labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically statedotherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to oruse by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described inthe applicable product packaging or literature), and must be selected and used in compliance with applicable health and safetystandards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrialand occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-sitesafety professional, industrial hygienist, or other subject matter expert.
