3M™ 7100137349 Finesse-it™ Buffing Pad Flat Face 87391 5-1/4 in Grey Foam
3M™ 7100137349 Finesse-it™ Buffing Pad Flat Face 87391 5-1/4 in Grey Foam
This item has been discontinued by 3M. Contact us for possible replacement at 1-800-888-1802
$12.99 Per Piece
Description
3M™ 7100137349 Finesse-it™ Buffing Pad Flat Face 87391 5-1/4 in Grey Foam
- 3M™ Hookit™ attachment system holds pad securely and provides quick disc/pad change-out
- Convolute face provides an efficient finishing action and helps prevent swirl marks
- Pads combine with buffers, random orbital tools, and variable speed polishers to produce desired final finish
- Provides soft, smooth surface for applying 3M™ Finesse-it™ polishes
- Repairs coatings without repainting
Product Features:
3M™ Finesse-it™ Buffing Pad - Gray Foam removes the abrasive sand scratches that were created to remove small defects in automotive clear coats. Our pads can also be used in the 3M™ Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats. The convolute surfaces provide more contact surface than flat pads and minimizes heat buildup. We manufacture these pads with the 3M™ Hookit™ attachment system for quick pad mounting and removal and to hold them securely in place during use. Hookit™ buffing pads quickly and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used.
We developed our line of foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. You can use our foam buffing pads in conjunction with polishes and are suitable to use with rotary and random orbital tools.
3M is a registered trademark of the 3M Company
Tech Specs
| AA Item# | 7100137349 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051125873918 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
