3M™ 7100112077 3” P800 Grit 216U A-wt Hookit™ Clean Sanding Disc
3M™ 7100112077 Clean Sanding Disc 3” 216U P800 Grit A-wt Hookit™
3M™ Hookit™ Clean Sanding Disc 216U features an innovative multi-hole design for improved dust extraction in finishing applications. 3M’s proprietary multi-hole pattern evacuates dust better than 5- or 6-hole products — increasing cut and dramatically increasing disc life. Open coat construction and a load-resistant coating further prevent clogging.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$0.65 Per Piece
Description
3M™ Hookit™ Clean Sanding Disc 7100112077 3” P800 Grit A-wt 216U Die 300LG
Sanding Discs Features:
- Precise multi-hole pattern provides superior dust extraction
- Open coat and load-resistant coating prevents clogging to optimize cut and product life
- 3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
- Aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
- Light A-weight paper backing is suitable for finishing
Our 3M™ Hookit™ Clean Sanding Disc 216U is constructed of aluminum oxide and is suitable for finishing applications on wood as well as primer, paint, sealers, topcoats, fiberglass, and plastics. The 3M™ Hookit™ (hook-and-loop) attachment system makes disc changes fast and easy, meaning the disc can be used again and again for the extent of the abrasive life.
For maximum dust extraction, use this disc with a 3M™ Hookit™ Clean Sanding pad and a random orbital sander with vacuum (both sold separately).
Sandpaper discs cut better and last longer when dust isn't loading the cutting surface of the abrasives. Our proprietary multi-hole pattern on Clean Sanding products evacuates dust at a higher rate that 5- or 6-hole products. This hole design doesn't even require alignment of holes with the disc pad, making disc changes quick and simple. Open coat construction means the abrasive grains are placed with space between them to help evacuate dust and other sanding debris and avoid clogging the cutting edge of the grains. The load-resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability. All of this adds up to increased productivity and reduced material consumption.
We chose aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives such as garnet quickly wear down with use. Due to their fast cut-rate, hardness, and strength, they are widely used in sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100112077 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051141278810 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
