3M™ 7100085947 Finesse-it™ Buffing Pad Flat Face 28877 3-1/2 in Red Foam
3M™ 7100085947 Finesse-it™ Buffing Pad Flat Face 28877 3-1/2 in Red Foam
This item has been discontinued by 3M. 3M suggested alternative 3M 7100323793
$7.32 Per Piece
Description
3M™ 7100085947 Finesse-it™ Buffing Pad Flat Face 28877 3-1/2 in Red Foam
- Flat face option provides 100% face contact for maximum cut and smooth running operation
- Helps to repair and restore coatings without repainting
- Hook and Loop attachment system holds pad securely and provides quick pad change-out
- Provides soft, smooth surface for applying 3M™ Finesse-it™ polishes
- Waffle face option provides sufficient contact surface without excess heat build up
Product Features:
High Quality Finishing
The 3M™ Finesse-it™ Buffing Pad - Green Foam removes the abrasive sand scratches that were created to remove small defects in automotive clear coats. You can also use this buffing pad in the 3M™ Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats whenever the finest finish is required. The waffle face minimizes heat buildup during buffing and helps eliminates swirl marks. The flat face increases contact area improving cut, and provides smooth feedback when running. This pad is manufactured with our hook and loop attachment system for quick pad attachment and removal and to hold the pad securely in place during use. These buffing pads conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used.
Heat Resistant
We developed our line of foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads also, relying on a combination of cutting and speed to remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are recommended for use with random orbital tools.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100085947 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051141288772 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
