3M™ 7100075585 7 x 7/8 A-VFN Scotch-Brite™ AL-DH Surface Conditioning Disc
3M™ 7100075585 Scotch-Brite™ AL-DH Surface Conditioning Disc - 7 x 7/8 A-VFN
Discontinued. 3M suggested alternative 3M 7100271024.
$8.58 Per Piece
Description
3M™ Scotch-Brite™ AL-DH Surface Conditioning Disc 7100075585 - 7 x 7/8 Aluminum Oxide Very Fine
Product Features:
- Commonly used for cleaning, finishing, blending and deburring while resisting disc loading
- Open web construction responds to surface irregularities and contours, while maintaining part geometry
- Non-woven nylon fibers break down gradually to expose fresh mineral, resulting in consistent cutting action
- Aluminum oxide mineral cuts sharp but finishes fine
- Hookit™ backing enables swift and easy power tool attachment
Effectively Remove Burrs and Contaminants without Damaging Base Material
Scotch-Brite™ products can help make your tough jobs easier. The Scotch-Brite™ AL Surface Conditioning Disc, specifically, helps achieve burr-free, paintable finishes in fewer steps without damaging the base material. It’s designed to lightly grind, finish and blend – using its unique blend of open web and mineral to minimize imperfections and deliver a fine finish. It excels on soft substrates and applications where loading is the cause of the end of the abrasive life.
Aluminum Oxide Mineral Cuts Fast and Sharp
Aluminum oxide mineral is interspersed in the disc’s open web. Aluminum oxide is a popular choice among industrial professionals given its durability and sharp cut. Moreover, aluminum oxide is known for being friable, meaning it fragments under heat and pressure in order to self renew. Friability keeps the mineral cutting sharp.
Hook and Loop for Easy Power Tool Attachment
We included a a Hook and Loop™ attachment on this disc so operators could easily swap between discs when there are multiple grades in a sequence – enhancing overall productivity. Abrasive material is pulled through the scrim on the back of the disc to create loops. Subsequently, loops mate to hooks on Hook and Loop backup pads (sold separately) which connect to tools. Altogether, the Hook and Loop attachment system makes disc to tool attachment swift and easy.
3M is a trademark of the 3M Company.
Tech Specs
| AA Item# | 7100075585 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051141542218 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
