3M™ 7100074414 6 x 2 x 1 80 Grit XE-wt 244E Flap Wheel
3M™ 7100074414 Flap Wheel 244E 6 x 2 x 1 80 Grit XE-wt
3M™ Flap Wheel 244E is a general purpose flap wheel that's great for blending, deburring, dimensioning and descaling.
$75.45 Per Piece
Description
3M™ 244E Flap Wheel 7100074414 6 x 2 x 1 80 Grit XE-wt
Cloth Bands Features:
- Flap wheel construction minimizes chatter risk
- Aluminum oxide mineral cuts sharp but leaves soft, brushed finishes
- XE-weight rayon backing resists edge wear, so abrasive can stand up to workpiece contours
- Works well on soft metals like carbon steel
- Resin bonded for heat resistance
The Benefits of Flap Wheel Construction
Flap brushes minimize the risk for chatter and marks given their unique construction. Under normal use, flaps rotate centrifugally and make continuous contact with the workpiece. By lapping the surface, the flaps eliminate the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft. The abrasive flaps offer a long lasting supply of fresh mineral and a load resistant design. As the flaps spin, they help rid the substrate of unwanted swarf and debris and leave a smooth, brushed finish. 3M™ Flap Wheel 244E may be used with a variety of tools, including a backstand, match and finish sander and a centerless grinder.
Cuts Sharp, Leaves a Fine Finish
Flaps on 3M™ Flap Wheel 244E contain aluminum oxide mineral. Aluminum oxide is a popular choice among industrial professionals due to its cut-rate and long life. Its hardness, strength, and low heat retention make the mineral a good choice in grinding applications. Mineral is bonded to the flaps with resin. The resin bond dissolves gradually as the wheel spins; it helps the abrasive withstand heat and stay strong while it works. Abrasives flaps on 3M™ Flap Wheel 244E have an XE-weight rayon backing. What this means is that the flaps will be more flexible and resistant to edge wear.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7100074414 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051144350865 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
