3M™ 7100066061 Finesse-it™ Marine Paste Compound 06039 1 gal
3M™ 7100066061 Finesse-it™ Marine Paste Compound 06039 1 gal
3M™ Finesse-It™ Marine Paste Compound reconditions boats with heavily oxidized surfaces to restore the appearance of the gelcoat. It also removes P800 sand scratches production gelcoat and grade 1000 or 1200 sand scratches on tooling gelcoat. White color reduces the potential for staining of light-colored boats.
$97.39 Per Piece
Description
3M™ 7100066061 Finesse-it™ Marine Paste Compound 06039 1 gal
- Formulated for boat reconditioning of heavily oxidized surfaces and finishes
- Long working time requires less compound per application
- Recommended step prior to polishing and waxing
- Removes sand scratches on production gelcoat
- White color reduces the potential of staining light-colored boats
Product Features:
3M™ Finesse-It™ Marine Paste Compound brings the appearance of boats back to life by the use of aggressive abrasive mineral to cut through heavy oxidation and chalky film to renew faded gelcoats. Our compound turns back the clock on the effects of weathering to restore the original vibrancy of the color. The abrasive mineral in the compound also allows you to remove minor scratches, rust and exhaust stains from gelcoat finishes. Compounding is a necessary first step prior to polishing or waxing to renew a glossy finish that glistens in the sunlight and water.
Compounding is advised when a surface is so weathered that polish is minimally effective in creating a shine. When that's the case, it's time to compound. Apply the compound and rub it in a circular motion to allow the abrasive mineral to cut through oxidation, grime and filmy residue. . You'll know the compound is working when the surface turns from dull and lifeless to glossy and shiny. Once the surface has been compounded, it's time to preserve and enhance the shine by polishing and waxing the boat.
Our 3M™ Finesse-It™ Marine Paste Compound offers several competitive advantages. First, it comes in a white color that reduces the chance of staining light colored boats. Second, our compound stays wet during compounding, reducing heat build-up, pitting, burning, and print through. Because our compound doesn't dry out too quickly, it allows a greater area to be compounded with less material. This compound buffs to a high gloss, requiring less glazing for a final finish. This compound contains no silicones or waxes.
3M is a registered trademark of the 3M Company
Tech Specs
| AA Item# | 7100066061 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051131060395 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
