3M™ 7010534456 1 x 35 A-FINE Scotch-Brite™ SE Surface Conditioning Belt
3M™ 7010534456 Scotch-Brite™ SE Surface Conditioning Belt - 1 x 35 A-FINE
Scotch-Brite™ SE Surface Conditioning Belt was built to last, resisting both wear and sharp edges when used for cleaning, blending, deburring and finishing on a variety of metals.
$24.47 Per Piece
Description
3M™ Scotch-Brite™ SE Surface Conditioning Belt 7010534456 - 1 x 35 Aluminum Oxide Fine
Product Features:
- Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing
- For use on backstand and off hand equipment
- Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Aggressive cutting without gouging, removes surface imperfections, grindlines, mill, and other marks
Constructed of resin-reinforced non-woven fiber, Scotch-Brite™ SE Surface Conditioning Belts resist loading and avoid under-cutting or gouging of the work piece. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.
Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.
Tech Specs
| AA Item# | 7010534456 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060712412 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
