3M™ 7010532912 9 x 11 P400 Grit 255L Hookit™ Gold Film Sheet
3M™ 7010532912 Hookit™ Gold Film Sheet 9 x 11 P400 Grit
$4.03 Per Piece
Description
3M™ Hookit™ Gold Film Sheet 7010532912 9 x 11 P400 Grit
Sanding Sheet Product Features:
- 3M™ Hookit™ attachments are easy to change and reuse, maximizing utility
- Aluminum oxide abrasive offers a fast cut, long life, and professional performance on many surfaces
- Tear-resistant film backing provides a close-tolerance, consistent finish
- Open coat construction provides a more aggressive cut
- Load-resistant coating prevents dust and debris from clogging the surface
3M&trade Hookit&trade hook-and-loop attachment works well by enabling easy re-use when switching between grades before the sheets are worn out. The open coat feature of the 3M&trade Hookit&trade Gold Film Sheet 255L provides a more aggressive cut than a comparable closed coat abrasive of the same grade, and its load-resistant coating reduces clogging, making this a good choice for woodworking and other applications where loading hinders performance. Designed for use with a random orbital sander, this sheet comes in a range of grades for fine sanding and finishing, and is resin-bonded for reliable performance under high heat and pressure.
Aluminum Oxide Abrasive Offers a Fast Cut, Long Life and Professional Performance
This abrasive uses aluminum oxide, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Open Coat Construction Prevents Dust and Debris from Clogging the Surface
Coated abrasives cut better and last longer when dust isn't clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are placed with space between them to help evacuate sanding dust and other debris to avoid clogging the cutting edge of the grains. The load-resistant coating also allows the product to continue cutting even when sanding softwoods, paints and other materials that would, otherwise, clog and hinder sanding ability. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. All of this adds up to increased productivity and reduced material consumption.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010532912 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060708576 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
