3M™ 7010509965 0.768 x 800 ft x 1 60 Micron 5 MIL 372L Microfinishing Film Roll
3M™ 7010509965 Microfinishing Film Roll 0.768 x 800 ft x 1 60 Micron 5 MIL 372L
$243.69 Per Piece
Description
3M™ Microfinishing Film Roll 7010509965 0.768 x 800 ft x 1 60 Micron 5 MIL 372L Type 2 Yellow
Product Features:
- Micron-graded aluminum oxide abrasive cuts fast and provides a consistent, fine finish
- Durable polyester film backing provides flexibility for consistent finishing on contoured surfaces
- Polyester film backing can be run wet
- Color-coded by grade for error proofing
In order to achieve an extremely consistent scratch for microfinishing, we use micron-graded mineral, measured at a very tight size tolerances for 3M™ Microfinishing Film Roll 372L. The resin bond ensures reliable, consistent performance. With a durable film backing, the abrasive helps achieve tight geometry and finish tolerances.
This microfinishing roll comes in a broad range of micron grades to achieve reproducible surface characteristics and geometric values that adhere to specification. In some applications, numerous grades are run simultaneously to achieve finishes that differ across the surface of a single complex part.
Film backings provide a superior, uniformly flat surface to hold abrasive particles – abrasive grains don’t compress or become pressed into the backing. Highly conformable and tear-resistant, the polyester film backing flexes to help achieve a consistent finish over contours and is stronger than comparable paper products, making it ideal for high-production environments.
Manufacturers of critical automotive components have little room for error in producing parts to specification. Power generation, life, noise, vibration and friction, fuel efficiency and emissions are all tied to the finishes of crankshafts and camshafts that rotate on increasingly thinner films of oil.
Engine component surfaces and geometry can be improved by using microfinishing which removes variations in the surface, minimizes friction and manipulates metal behavior in other ways.
3M™ Microfinishing Films are used in the production of industrial components such as custom flanges and fittings for the oil and gas industry, as well as superfinishing of automotive parts, like crankshafts, camshafts and transmission parts.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010509965 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060679944 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
