3M™ 7010509943 8 x 150 ft x 3 60 Micron 5 MIL 472L Microfinishing Film Roll
3M™ 7010509943 Microfinishing Film Roll 8 x 150 ft x 3 60 Micron 5 MIL 472L
3M™ Microfinishing Film Roll 472L was designed for superfinishing and powertrain microfinishing. This roll helps achieve uniform, consistent finishes on parts where close tolerances are important.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$641.17 Per Piece
Description
3M™ 7010509943 8 x 150 ft x 3 60 Micron 5 MIL 472L Microfinishing Film Roll Type E Brown Keyed Core ASO
Sanding Product Features:
- Micron-graded silicon carbide mineral cuts sharp and fast while producing fine finishes
- High-strength polyester backing is durable and has uniform thickness
- Available in a range of grades
- Non-slip backsize helps in powertrain applications, such as Microfinishing
- May be used on a variety of substrates
Built for Microfinishing
On cylindrical parts, like automotive powertrain components, consistent and predictable finishes are key. 3M™ Microfinishing Film Roll 472L helps produce fine finishes and achieve close tolerances on parts like these. It can be used on a variety of substrates, including gelcoat, soft rubber, hard chrome, soft and hard composites, fiberglass, all metals and hard-filled rubber.
Silicon Carbide Mineral and Polyester Backing
We engineer Film Roll 472L by adhering micron-graded silicon carbide mineral to polyester film using a resin bond. Silicon carbide mineral is very hard and fractures easily, resulting in freshly exposed sharp edges that cut extra fast and produce a smooth, professional-looking finish. While it wears faster than aluminum oxide, it produces a brighter finish. Roll 472L is available in a variety of grades, so operators can tailor the grade to their part.
The high-strength polyester backing has uniform caliper thickness throughout its length, which is helpful when close tolerances are important.
Get Close to the Close Tolerance
Across industries, from transportation to heavy equipment, from general industrial to aerospace, professionals value part integrity and consistency. Combining the strength of a polyester film backing with the fine and acute cutting qualities of micron-graded silicon carbide, 3M™ Microfinishing Film Roll 472L is a good match for workpieces that require precise and uniform cutting action.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010509943 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051119126570 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
