3M™ 7010509933 4-1/2 x 50 ft x 3 180 Micron 3 MIL 366L Microfinishing Film Roll
3M™ 7010509933 Microfinishing Film Roll 4-1/2 x 50 ft x 3 180 Micron 3 MIL 366L
Discontinued. Contact us for options.
$84.45 Per Piece
Description
3M™ Microfinishing Film Roll 7010509933 4-1/2 x 50 ft x 3 180 Micron 3 MIL 366L Type D Maroon
Product Features:
- Precision, micron-graded silicon carbide abrasive offers a fast cut and a superior, uniform finish on many substrates
- Ideal for sanding plastics, wood, paint, e-coat and composites
- Strong 3 mil film backing enhances abrasive durability
- Use wet or dry
- Pressure sensitive adhesive backing allows quick, flat attachment and clean removal for multi-step finishing processes
- Roll form means abrasive may be cut and shaped per project requirements
Silicon Carbide and PSA Film Backing
Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications, such as sanding and finishing during paint prep. While it breaks down faster than aluminum oxide, this mineral produces a brighter finish.
The thin 3 mil film backing on Film 468L flexes to help achieve a consistent finish over contours and is a smart choice for close tolerance applications. The backing also offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.
Designed for use with a variety of tools including orbital and random orbital platen sanders, this abrasive comes in a range of micron grades for complete multi-step sanding and finishing. The pressure sensitive adhesive (PSA) provides flat, easy attachment, holds the disc securely in place during use, and removes cleanly from the backup pad (sold separately).
Provides Maximal Productivity
Abrasives cut better and last longer when dust isn’t clogging the cutting surface of the abrasives. This film roll’s abrasive grains are placed with space between them to help evacuate sawdust and other sanding debris and avoid clogging the cutting edge of the grains. This also allows the abrasive to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability. All of this adds up to increased productivity and reduced material consumption.
3M Abrasives for Finer Finishes
Microfinishing – an important application for many operators – corrects the geometry of parts and creates fine finishes. Microfinishing can remove damaged or amorphous layers to improve the surface finish and roundness of the part.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010509933 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060679869 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
