3M™ 7010508437 39-3/8 x 38 yds P1000 Grit 281W Cloth Sanding Roll
3M™ 7010508437 Cloth Roll 39-3/8 x 38 yds P1000 Grit 281W
3M™ Wetordry™ Cloth Roll 281W is an aluminum oxide Wetordry™ roll constructed on a screen cloth backing. Used dry or with water, 3M™ Wetordry™ Cloth Roll 281W enables the user to rinse areas of the workpiece and the roll during use to prevent dust and debris from clogging the points of the abrasive; and reduces air-borne dust, while producing a faster cut at the same time.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$4238.26 Per Piece
Description
3M™ Wetordry™ Cloth Roll 7010508437 39-3/8 x 38 yd P1000 Grit 281W
Sanding Roll Product Features:
- Versatile cloth roll can be used wet or dry on e-coat primer, gel coat, metal and wood
- Cloth backing provides durability for either hand or machine sanding
- Can be run wet or dry depending upon needs of the job and user preference
- Available in a range of sizes and grades to suit unique project needs
- Aluminum oxide mineral is friable and reveals sharp cutting edges for a consistent cut
Wet Sanding: the Wetordry™ Advantage
3M™ Wetordry™ products are backed with waterproof backing that supports both wet and dry applications. Lighter weight than cloth and smooth rather than textured, the mesh backing is preferable for lighter applications such as finishing and paint prep. At the same time, many such applications produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects can be minimized by sanding with water, or a coolant to rinse dust and cutting debris away from the workpiece and the abrasive surface.
Used with water, 3M™ Wetordry™ Cloth Roll 281W helps users rinse areas of the workpiece during finishing. It prevents dust and debris from clogging the abrasive and keeps the abrasive cutting fast. In short – it’s like wet and dry sandpaper in a single product. 3M™ Wetordry™ Cloth Roll 281W is ideal on e-coat primer and wood and may also be used dry for finishing metal and gel coats. In the marine industry, it can be used for sanding old finishes, fine feather edging and surface work.
The Benefits of Aluminum Oxide
The secret to a consistent, sharp abrasive is in the mineral. 3M™ Wetordry™ Cloth Roll 281W is made with aluminum oxide mineral, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural minerals dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications, as well as sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010508437 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051125572323 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
