3M™ 7010495870 Polyimide Hybrid Bond Diamond Wheels and Tools 5X1/4X1-1/4 X=3/8 V=20 D220 665PK
3M™ 7010495870 Polyimide Hybrid Bond Diamond Wheels and Tools 5X1/4X1-1/4,X=3/8, V=20 D220 665PK
This general purpose wheel is designed to give you the best balance of form retention and wheel life at average cut rates.
$407.96 Per Piece
Description
7010495870 3M™ Polyimide Hybrid Bond Diamond Wheels and Tools 5X1/4X1-1/4,X=3/8, V=20 D220 665PK
Grinding Wheel Features:
- Diamond abrasive capable of cutting or shaping cemented carbide, ferrites and ceramics
- Polyimide bonding resists thermal and chemical deterioration
- Designed to provide a balance of form retention and cut rate
Hybrid diamond wheels are designed for high performance grinding on carbide. The 3M™ Diamond Wheel 665PK line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that 3M™ Diamond Wheel 665PK provides.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010495870 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060001547 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
