3M™ 7010495801 Polyimide Hybrid Bond Diamond Wheels and Tools 11V2 4X1-1/2X1-1/4 X=1/4 W=1/4 D320 665HL V=20
3M™ 7010495801 Polyimide Hybrid Bond Diamond Wheels and Tools 11V2 4X1-1/2X1-1/4,X=1/4, W=1/4 D320 665HL, V=20
3M™ Diamond Wheel 665HL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and a long wheel life without sacrificing cut rate. It can be used with either oil or water based lubricants.
This 3M™ item is made to order with an approximate 2 - 3 week lead-time. Special order - Non-returnable
$746.49 Per Piece
Description
7010495801 3M™ Polyimide Hybrid Bond Diamond Wheels and Tools 11V2 4X1-1/2X1-1/4,X=1/4, W=1/4 D320 665HL, V=20
Grinding Wheel Features:
- Diamond abrasive capable of cutting or shaping cemented carbide, ferrites and ceramics
- Hybrid bonding resists thermal and chemical deterioration
- Designed to provide the best form retention and wheel life without sacrificing cut rate
- Various wheel designs are available for gashing, primary and secondary relief and end work
- Arbor holes are made to customer specifications
High Performance Grinding
Our hybrid diamond wheels are designed for high performance grinding on carbide. The 3M™ Diamond Wheel 665HL line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ Diamond Wheel 665HL provides.
Hybrid Bonding System
The 3M™ Diamond Wheel 665HL line uses a hybrid bond system which offers increased thermal stability compared to the phenolic or polyimide bond systems. This allows 665HL to grind at higher cut rates and maintain form under higher temperature grinding conditions where phenolic and polyimide bond systems undergo thermal and chemical deterioration.
The Right Wheel for Every Job
3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. From short runs and re-sharpening to "lights-out" and long production runs, 3M has the wheel design to meet your needs.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010495801 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00638060000793 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
