3M™ 7010492714 Resin Bond Diamond Wheels and Tools 1A1 6X1/2X1-1/4 X=1/8 D120663BI
3M™ 7010492714 Resin Bond Diamond Wheels and Tools 1A1 6X1/2X1-1/4, X=1/8 D120663BI
3M™ Diamond Resin Wheel 663BI is used in the production and sharpening of carbide cutting tools.
$439.13 Per Piece
Description
7010492714 3M™ Resin Bond Diamond Wheels and Tools 1A1 6X1/2X1-1/4, X=1/8 D120663BI
Grinding Wheel Features:
- Diamond abrasive for use when grinding cemented carbide, tungsten carbide, and ceramics
- Durable resin bond resists deterioration from heat, extending the life of the abrasive wheel
- Designed to provide both balanced form retention and free cutting performance
- Arbor holes are made to customer specifications
Resin bond diamond wheels are designed for high performance when grinding tungsten carbide. The 3M™ Diamond Resin Wheel 663BI line is specifically designed for the production and re-sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that 3M™ Diamond Resin Wheel 663BI provides.
These superabrasive wheels also use a resin bond which is specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This R rated bond provides cut rate without sacrificing form retentionwhile grinding materials like tungsten carbide. This bonding material is used with water based lubricants for lower grinding temperatures.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010492714 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00076308245955 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
