3M™ 7010365434 2 x 1-1/2 x 1-1/4 P120 Grit YF-wt 777F Cloth Cone
3M™ Cloth Cone 7010365434 2 x 1-1/2 x 1-1/4 777F L-Flex
3M™ Cloth Cone 777F reaches into corners, inside surfaces and tight spaces to refine welds, remove machine tool marks, and polish. Built with 3M™ Ceramic Abrasive Grain on a water resistant polyester cloth backing, it can be run wet or dry. A resin bond is heat resistant and a grinding aid helps to run cool, especially on heat sensitive metals like stainless steel and nickel alloys.
This 3M™ item is made to order with an approximate 8 week lead-time. Special order - Non-returnable
$6.06 Per Piece
Description
3M™ 7010365434 2 x 1-1/2 x 1-1/4 777F P120 Grit YF-wt Cloth Cone L-Flex
Cloth Cone Features:
- Ceramic/aluminum oxide blend self-sharpens with use and cuts with exceptional efficiency
- Tough YF-weight, polyester cloth backing is water resistant for wet applications
- Heat-resistant resin bond helps run cool and smooth
- Cone shape reaches into tight, hard-to-reach spaces
- Grinding aid enhances performance on heat-sensitive alloys such as stainless steel, nickel alloys, and titanium
One of 3M's best cloth-backed abrasives for stainless steels, aluminum and carbon steel, 3M™ Cloth Cone 777F is used with die grinders. 3M-engineered high-performance ceramic abrasive grain is blended with aluminum oxide for a combination of durability and cutting efficiency. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Tackle Tight Corners
This specialty abrasive is a valuable tool for reaching into corners, where larger diameter tools can't work. It is effective for flash removal, as well as polishing or removing machine tool marks and edge breaking.
Cloth cones mount onto a compatible mandrel (sold separately) that attaches to a die grinder or power drill. The center hole diameter of the cone must be equal to the diameter of the mandrel pilot inserted into the cone.
Best for Heat-Sensitive Metals
Ideally suited for heat sensitive metals like stainless steel, aluminum and nickel alloys, 3M™ Cloth Cone 777F combines all the right features to grind cooler with an efficient and faster cut.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010365434 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051144823048 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
