3M™ 7010361042 6 x 1 x 1 P240 Grit X-wt 441D Flap Wheel
3M™ 7010361042 Flap Wheel 441D 6 x 1 x 1 P240 Grit X-wt
3M™ Flap Wheel 441D was designed for light grinding, blending, deburring, and polishing on a variety of metals.
$83.61 Per Piece
Description
3M™ 441D Flap Wheel 7010361042 6 x 1 x 1 P240 Grit X-wt
Cloth Bands Features:
- Silicon carbide mineral provides an aggressive cut and a consistent finish
- X-weight cotton backing is designed for grinding and finishing applications
- Resin bonding resists thermal and chemical deterioration for extended wheel life
- Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
- Flaps wear down to expose fresh abrasive mineral, assuring a fast and consistent cut
Silicon Carbide Abrasive
Each flap on the 3M™ Flap Wheel 441D is covered with silicon carbide mineral , which is a popular choice among industrial professionals because of its fast cut-rate and excellent finish. This synthetic mineral is very hard and fractures easily, resulting in freshly exposed cutting edges that cut fast, stay sharp and produce a professional finish throughout the products life. Silicon carbide products are commonly used for low-pressure applications such as cleaning and finishing on wood and metal. While it wears faster than aluminum oxide, it produces a superior finish.
Tough Construction
The abrasive mix is attached to a flexible backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration, which can occur during high speed sanding. This bond is very hard which allows for faster cuts and a higher cut rate. Each flap uses an X-weight polyster/cotton backing, which provides a tough, but flexible surface that conforms to fit any work piece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, assuring that surfaces are sanded consistently throughout the life of the wheel.
Flap Wheel Design
Coated Abrasive flap wheels are the ideal choice for light grinding, blending, graining, finishing and scale removal on a variety of metals. The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7010361042 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051141279695 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
