3M™ 7000121163 4-1/2 x 4 x 5/8- 100 Grit 11 A/O 100 Scotch-Brite™ Match and Finish Combi Flap Brush
3M™ Scotch-Brite™ Match and Finish Combi Flap Brush 7000121163 4-1/2 x 4 x 5/8- 100 Grit 11 Density Aluminum Oxide 100
This item has been discontinued. Contact us for alternatives at 1-800-888-1802.
$102.66 Per Piece
Description
3M™ Scotch-Brite™ 7000121163 4-1/2 x 4 x 5/8- 100 Grit Match and Finish Combi Flap Brush 11 Density Aluminum Oxide 100
Flap Brush Features:
- Flap construction reduces risk for chatter
- Easy-thread on/off attachment
- Aluminum oxide cuts sharp and leaves a soft scratch pattern
- May be used on stainless steel, aluminum and brass
- Open web is spongy and responds to surface irregularities reducing the risk of marring the part
Restoring Finishes
We engineered the Scotch-Brite™ Match and Finish Combi Flap Brush by combining aluminum oxide mineral and nonwoven nylon fibers with resin. Sharp-cutting aluminum oxide mineral leaves a fine finish, while the spongy, open web responds to surface irregularities and maintains part geometry. This brush helps restore final finishes on fabricated metals like stainless, aluminum and brass. Among all Scotch-Brite™ flap brushes, Scotch-Brite™ Match and Finish Combi Flap Brush tends to be the most aggressive, because it fuses the cutting action of a coated abrasive with the finishing action of non-woven material.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7000121163 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051141557427 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
