3M™ 7000118267 9 x 11 120 A-wt 110N Paper Sheet
3M™ 7000118267 Paper Sheet 9 x 11 120 A-wt 110N
Mfg suggested alternative 3M 7000119258.
$0.74 Per Piece
Description
3M™ Paper Sheet 7000118267 9 x 11 120 A-wt 110N Type F Black Pattern 18
Sanding Sheet Features:
- Garnet mineral provides a fine finish for bare wood preparation
- Light A-weight paper backing allows flexibility for hand sanding
- Desirable open coat resists loading even on soft woods
- Easily cuts and folds for use with blocks
Hand Sanding for Fine Wood Finishes
The softer cut of garnet on our 3M™ Paper Sheet 110N leaves a smoother finish than other abrasive minerals when sanding wood by hand. A light A-weight paper backing provides flexibility and its flat profile leaves a consistent, light scratch. Available in a broad range of grades from 80 to 220, this popular 9 x 11-inch sheet can easily be cut to fit any hand tool or folded to reach critical surfaces, corners and recesses.
Garnet Is Good for Wood
Though garnet is softer than other minerals, it fractures in use, revealing new sharp edges. Garnet mineral dulls more quickly than other abrasive minerals, an advantage when working with wood. It cuts less deeply and leaves a smoother finish.
Finely finished wood products depend upon meticulous sanding to prepare wood for stains and other coatings. Garnet also tends to burnish wood, which closes off pores, preventing excessive absorption of stain for more even coloration.
When an Open Coat is Highly Desirable
Abrasives cut better and last longer when dust isn’t clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are less densely spaced on the backing, allowing sawdust to be evacuated keeping cutting mineral free. This allows the sheet to continue cutting even when sanding soft woods and materials that would, otherwise, clog the grain and hinder sanding ability.
The Choice of Professionals for Sanding Bare Wood
This paper-backed, garnet sheet is designed for sanding unfinished wood by hand in industrial cabinetry and furniture manufacturing, custom woodworking and millwork, primary wood and panel processing.
3M™ is a trademark of the 3M Company
Tech Specs
| AA Item# | 7000118267 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051144100057 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
