3M™ 7000000484 Perfect-It™ Foam Polishing Pad 05725 Single Sided Flat Back 8 in(203.2 mm)
3M™ 7000000484 Perfect-It™ Foam Polishing Pad 05725 Single Sided Flat Back 8 in(203.2 mm)
3M™ Perfect-it™ Foam Polishing Pad is a soft foam buffing pad used to buff out fine scratches created from compounding steps. The waffle face gives you greater surface contact area than flat surface pads over contoured surfaces, minimizes heat buildup during buffing and helps eliminates swirl marks. It also helps the pad hold the polish and reduce slinging.
$31.17 Per Piece
Description
3M™ 7000000484 Perfect-It™ Foam Polishing Pad 05725 Single Sided Flat Back 8 in(203.2 mm)
- Pads can be used with either pneumatic or electric variable speed polishers to produce desired final finish
- Provides soft surface for applying 3M™ polishes
- Quickly removes compounding swirls when used with 3M™ Perfect-it™ EX machine polish
- Waffle face provides smooth contact surface, for even handling over curves without excess heat build up
Product Features:
Better Paint Demands Better Products
We designed this grey buffing pad to be used in conjunction with our 3M™ Perfect-it™ EX family of polishes specially developed to quickly remove compounding swirls. The pad removes the compounding swirl marks left by either foam or wool pads and can also be used in the 3M™ Perfect-it™ Paint Finishing System for paint and clear coats repair when the finest finish is required. Finish results are dependent on the combination of coating type, polish, and tools used.
The Evolution of Paint and Clear Coat
We developed foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They operate between 1200 and 2000 rpms to remove fine scratches, compound swirl marks, and surface marring. Foam buffing pads are used in conjunction with machine polishes and are suitable to use with rotary and random orbital tools.
The 3M™ Perfect-It™ Suite of Products
3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. Our system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair.
3M is a registered trademark of the 3M Company
Tech Specs
| AA Item# | 7000000484 |
|---|---|
| Manufacturer: | 3M |
| 3M Part# | 00051131057258 |
For industrial/occupational use only. Not for consumer sale or use. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
