Connect with us AA Abrasives on Facebook AA Abrasives - Twitter Nationwide Toll Free   800-888-1802
24-Hour Fax   215-925-4975

Product Catalog



Resin Fiber Sanding Discs

Resin Fiber Sanding Discs

Resin fiber sanding discs are used for blending, grinding, deburring and finishing. This heavy duty coated abrasive fiber disc is designed for applications ranging from heavy stock removal to surface blending. Choose from:



PSA Gold Stearate Disc Rolls Paper, 5" - 8"

PSA Gold Stearate Disc Rolls Paper, 5" - 8"

Gold sanding discs - Made with premium aluminum oxide grain, gold stearate, these are the most efficient sanding disc roll packages available. The non loading pressure sensitive sandpaper discs significantly decreases grit or dust contamination. The durable backing of these sanding discs provides a long shelf life. Gold sanding discs are available with or without vacuum holes. Made in USA.


PSA Gold Stearate Stacked Individual Discs Paper, 5" - 8"

PSA Gold Stearate Stacked Individual Discs Paper, 5" - 8"

Gold PSA sanding discs are individually stacked sanding discs. These sanding disc have a peel and stick backing sometimes referred to as sticky back sanding discs. Same heavy B & D weight found on our sanding disc rolls, with a no-fil top coat to minimize loading. Each sanding disk has a pull tab on the release liner for easy removal. High quality gold sandpaper discs.


Hook & Loop Gold Stearate Sanding Discs, 3" - 6"

Hook & Loop Gold Stearate Sanding Discs, 3" - 6"

Hook & loop gold sanding discs are made with premium aluminum oxide grain, gold stearate, these are the most efficient, abrasive sanding disc roll packages available. Their non loading pressure sensitive sanding paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. Hook & Loop Gold Stearate Sanding Discs, 3" - 6" are available with or without vacuum holes. Made in USA.


Trim-Kut Discs

Trim-Kut Discs

Trim-Kut discs are made of premium aluminum oxide grains bonded to a special, durable polymer backing.This special backing enables the abrasive discs to be used without a backing pad. The aggressive grinding action in combination with cool cutting results in a rapid stock removal for many different applications. A Trim-Kut disc may be trimmed as needed to expose new grinding surfaces.


Flap Discs

Flap Discs

Our flap discs are made with premium zirconia alumina grain for fast stock removal. Our flap discs have a long life and stay sharp 10-15 times longer than conventional fiber flap disks. This flap disc offers cooler grinding and finishing in one step. These flap discs have a low noise level and lightweight design. No back up pad is required for use on portable disc grinders and disc sanders. Very little surface pressure is needed when using these flap discs. AA Abrasives flap discs are easy to use and cost effective abrasive choice in flap discs. MADE IN USA.



BlueZirc Flap Discs 4" - 7"

BlueZirc Flap Discs 4" - 7"

AA Abrasives BlueZirc high quality flap disc line- the most cost effective available. Please note that it is the quality of these flap discs that differentiates them from "low cost" flap discs on the market.

These flap discs offer the lowest cost per grind and let us explain how:

Flap discs generally come in a grit range of #36, #40, #60, #80 & #120. This new line of flap discs we offer in the #36, #40 and #60 range come in what is known as PB. PB will grind fast and aggressively on material removal. The PB flap disc line is designed for aggressive removal without the need for heavy pressure from the operator which will help eliminate worker fatigue.

These discs are both heat and load resistant and are designed and manufactured for all metals, stainless and aluminum. The PB line of flap discs have a y-weight polyester, resin bonding system with heavy-duty fiber backing for increased strength, durability, absorbs vibration and has good tear resistance. The PB line can be used for area and edge grinding, coarse and intermediate grinding on welds, finishing fillet welds, rust removal, deburring and cleaning cast parts.



PSA Cloth Discs

PSA Cloth Discs

PSA Cloth discs for hand held abrasive tools or machine mounted backing plates. These coated abrasive discs with pressure sensitive adhesive are ideal for all repair and maintenance applications from medium grinding to light deburring. PSA cloth disc are for use on contours and flat surfaces.


Quick Change Mini Sanding Discs

Quick Change Mini Sanding Discs

AA Abrasives Quick Change Sanding Discs

Quick Change Sanding Discs T-R and Quick Change Sanding Discs T-S

AA Abrasives Quick Change Mini Sanding Discs are available in aluminum oxide, premium green zirconia alumina and ceramic plus. These quick change mini sanding discs are perfect for grinding contoured and irregular surfaces, and are excellent for a wide range of general purpose applications. AA Abrasives Quick Change Mini Sanding Discs are heat treated and fully water resistant. The quick changing roll-on system allows for cost effective sanding and finishing operations. For use on straight and right angle die grinders and high speed portable drills. Interchangable with 3M™ Roloc System, Norton Abrasives TR and TS Quick Change Attachment Systems, Merit Type III and Type II Quick Change Attachment Systems, Standard Abrasives LockIt and SocAtt Quick Change Attachment Systems, Superior Type R and Type S Quick Change Attachment Systems, Arc Type R and Type S Quick Change Attachment Systems, Pferd Type CDR and Type CD Quick Change Attachment Systems, Sait SAIT-LOK-R and SAIT-LOK Quick Change Attachment Systems, Camel Roll On and Turn On Quick Change Attachment Systems, Klingspor QRC and QMC Quick Change Attachment Systems and Garryson Type R and Type S Quick Change Attachment Systems. Made in USA.



PSA BLUE FILM Discs Stacked with Tab, 5"-6", Heavy Duty No Tear

PSA BLUE FILM Discs Stacked with Tab, 5"-6", Heavy Duty No Tear

FilmBac PSA Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. PSA BLUE FILM Discs Stacked with a Tab, 5"-6", Heavy Duty No Tear individually tabbed sanding discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant blue film backing and are used on a variety of random orbital sanders or low speed DA sanders. Blue film backed sanding discs are more durable than sanding paper backed disks with minimal mineral shelling. Special stearated coating on these Blue Film Sanding Discs resists loading.



Hook & Loop BLUE FILM Discs Stacked, 5"-6", Heavy Duty No Tear

Hook & Loop BLUE FILM Discs Stacked, 5"-6", Heavy Duty No Tear

FilmBac Hook & Loop Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. This abrasive sanding disc is one of our finest quality Aluminum Oxide grain bonded to a tear resistant blue film backing and can be used on a variety of random orbital sanders or low speed DA sanders. Blue film backed hook and loop sanding discs are more durable than paper backed sanding discs with minimal mineral shelling. Special stearated coating resists loading.




Mounted Flap Wheels, 1/4" sk, 1"-3"

Mounted Flap Wheels, 1/4" sk, 1"-3"

AA Abrasives - Mounted Flap Wheels -Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many abrasives applications such as deburring, finishing, polishing and cleaning. These mounted flap wheels are for use in die grinders, flexible shaft tools and high speed portable drills. These flap wheels are designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each flap wheel.


Mounted Flap Wheels, 1/4-20 Threaded Shank, 1"-3"

Mounted Flap Wheels, 1/4-20 Threaded Shank, 1"-3"

AA Abrasives - Mounted Flap Wheels, 1/4-20 Threaded Shank, 1"-3" shank allows for quick spin-on and spin-off mounting. Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many abrasives applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each flap wheel.


Unmounted Flap Wheels, 3-1/2" - 12"

Unmounted Flap Wheels, 3-1/2" - 12"

AA Abrasives - Unmounted flap wheels are perfect for delivering a consistent uniform finish on large pieces. Coated abrasive unmounted flap wheels are designed for use on flexible shafts, slow speed straight or bench grinders. Safe maximum RPM ratings are indicated on each flap wheel.


Abrasive Flap Rolls (With 5/8-11 Hubbing or With 3/4" Arbor Quad Keyway)

Abrasive Flap Rolls (With 5/8-11 Hubbing or With 3/4" Arbor Quad Keyway)

Abrasive flap rolls are perfect for light removal and graining. Flap rolls have a wide profile ideal for finishing large surface areas with portable finishing tools. Gives a consistent finish without loading up.

FOR USE WITH:
WALTER LINEMATE 30-A-268 (5/8-11 THREAD)
•FEIN METAL FINISHER #WP012-27 (5/8-11 THREAD)
DYNABRADE ELECTRIC DYNISHER D51585 (5/8-11 THREAD)
•SUHNER UWK10-R 5" R/A GRINDER (5/8-11 THREAD)
•FLEX-LW1202S LOW SPEED POLISHER (5/8-11 THREAD)
METABO SE12-115 W/341603950 EXTENSION, 316042950 SCREW AND 1411566230 WOOD DRIFT KEY ADAPTER (5/8-11 THREAD)
DYNABRADE DYNISHER D13450 (3/4" ARBOR)
DYNABRADE DYNISHER D13400 (3/4" ARBOR)
CS UNITEC-PTX ECO SMART 47002A SURFACE FINISHER (3/4" ARBOR KEYWAY)
•SUHNER UPK4-R R/A POLISHER (3/4" ARBOR KEYWAY)



Straight Cartridge Rolls

Straight Cartridge Rolls

AA Abrasives straight cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending.



Full Tapered Cartridge Rolls

Full Tapered Cartridge Rolls

AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. These abrasive cartridge rolls are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending. They are securely and uniformly wound to create a balanced tool with a true center. They are perfect for finishing jobs with channels, irregular contours and angles. AA Abrasives cartridge rolls are an economical and fast cutting abrasive product.



No Lap Bands, 1/2" - 3"

No Lap Bands, 1/2" - 3"

No Lap Bands are made with aluminum oxide grain and resin bonded. They are perfect for finishing curved and contoured surfaces. For use with expanding rubber drum.



Abrasive Shop Rolls, 1" - 2"

Abrasive Shop Rolls, 1" - 2"

Sharp, fast clean - aluminum oxide grain cutting abrasive material used for polishing, finishing, sanding, deburring and other maintenance associated with tool and welding shops. Flexible cloth backing allows you to tear abrasive shop roll to the desired length. Excellent for contour work, and turning parts in lathes. Each abrasive shop roll is in a durable cardboard box. Easy to dispense material and convenient to store.



Aluminum Oxide Cloth Sand Sheets, 9x11

Aluminum Oxide Cloth Sand Sheets, 9x11

Aluminum oxide cloth sanding sheets are excellent for general clean up on metal and wood surfaces. They outlast sandpaper sheets 4 to 1. They have a flexible durable backing and are water resistant. Cloth sanding sheet size is 9 x 11.


Silicon Carbide Waterproof Sand Paper Sheets, 9x11

Silicon Carbide Waterproof Sand Paper Sheets, 9x11

Silicon carbide waterproof sandpaper is best for wet and dry sanding of metal, paints and plastics. Silicon carbide waterproof sandpaper leaves an excellent finish on most precious metals. It has a long life and is an economical choice if you need wet & dry sand paper sheets. Sanding paper sheet size 9 x 11.



Premium Gold 9x11 Sandpaper Sheets Aluminum Oxide No-Load

Premium Gold 9x11 Sandpaper Sheets Aluminum Oxide No-Load

AA Abrasives gold sandpaper - Our 9 x 11 premium aluminum oxide no-load gold sand paper sheets are great for sanding water based finishes, special stearate coating will not leave fish eyes. These abrasive sheets are non-loading and do not leave a residue. Other applications include sanding metals, woods, fiberglass, composites, plastics, lacquers, paint, body fillers and other dry sanding uses. Gold sandpaper sheets are known for their fast cut rates, flexibility and consistent finishes. They are resin on resin bond and high quality latex backed paper. AA Abrasives Gold Sandpaper sheets compete with 3M™ Gold Sand paper Sheets - 216U Gold Production™ with gold resinate Fre-Cut™ or Mirka® Gold sandpaper. AA Abrasives premium aluminum oxide gold sandpaper sheets last 3 times longer than our competitors traditional sandpaper. #60 grit thru #120 grit are C-weight, #150 grit thru #320 grit are B-weight, and #400 grit and #600 grit are A-weight backed paper.

Sanding sheet size - 9" x 11"



Aluminum Oxide and Cabinet Sand Paper Sheets, 9x11

Aluminum Oxide and Cabinet Sand Paper Sheets, 9x11

Aluminum oxide and cabinet sandpaper is excellent for wood sanding. This sanding paper is an aggressive and economical choice for your sand paper needs. Sandpaper sheet size is 9 x 11.



Silicon Carbide Stearate Sand Paper Sheets, 9x11

Silicon Carbide Stearate Sand Paper Sheets, 9x11

Silicon carbide stearate coated sandpaper sheets reduce loading of material. This no-load sanding paper is excellent on wood, plastics and metals. Sand paper sheet size is 9 x 11.



Garnet Finishing & Cabinet Sand Paper Sheets, 9x11

Garnet Finishing & Cabinet Sand Paper Sheets, 9x11

Garnet sandpaper - finishing & cabinet sandpaper leaves an excellent finish on woods. This garnet sanding paper has a medium aggressiveness for sanding. It has a long life and is an economical choice for sand paper. Sandpaper sheet size is 9 x 11.



Emery Cloth Sand Sheets, 9x11

Emery Cloth Sand Sheets, 9x11

Emery cloth sanding sheets are close coat construction and are made of emery grain. Emery sanding sheets have a cloth backing which is very flexible. These emery cloth sanding sheets are excellent for cleaning and polishing metal surfaces. Emery cloth can also used on wood when sandpaper is not an option. Emery cloth sand sheet size 9 x 11.



Crocus Cloth Sand Sheets, 9x11

Crocus Cloth Sand Sheets, 9x11

Crocus cloth sanding sheets are made of a natural mineral used for extremely fine finishing and polishing on metals, plastics and woods when sandpaper is not an option. Crocus cloth is excellent for use on precious metals. They have a flexible cloth backing. Sanding sheet size 9 x 11.



Silicon Carbide Screen Cloth Sheets, 9x11

Silicon Carbide Screen Cloth Sheets, 9x11

Silicon carbide screen cloth is excellent for sanding plaster or speckle. This sanding screen cloth reduces loading of material and can be used wet or dry. These screen cloth sanding sheets are sometimes referred to as wet & dry sandpaper. For use on copper tubing and non-ferrous metals. Screencloth sanding sheet size 9 x 11. Silicon carbide screen cloth discs are also available for wet and dry use.



Floor Sanding Products

Floor Sanding Products

AA Abrasives offers a full line of floor sanding and finishing products from Sanding Belts for Floor Machines to Floor Screen Discs. Our floor sanding and finishing products are made of the highest quality grains and strongest backings in the industry. Our abrasive floor sanding products resist loading and tearing. We offer abrasive floor sanding products for most manufacturers of floor machines at great savings. Click below For:
Floor Rolls-
Floor Paper discs-
Floor Sheets-
Floor Screen Discs-
Sanding Belts for Floor Machines


Sanding belts, A/O Resin Bond Premium Grade, Ziroconia Alumina, & Zirconia Alumina Plus

Sanding belts, A/O Resin Bond Premium Grade, Ziroconia Alumina, & Zirconia Alumina Plus

Aluminum Oxide Sanding Belts - A/O

Aluminum Oxide Sanding Belts are resin bonded, and have tear and break resistant joints. These abrasive sanding belts are excellent on all metals and hard woods.

Aluminum oxide Y-Wt sanding belts are open coat poly/cotton material has a specially coated backing which provides high performance for washable belts. The high rigidity retention resists softening wash after wash. These coated abrasive sanding belts are great for hard and soft woods and soft metals.

Aluminum oxide J-Wt premium cotton sanding belts are flexible enough for most contour surfaces. They are made of egyptian cotton which allows the belt to last longer. The premium heat treated grain allows sharper cutting and consistent finishes. These sanding belts are great on non-ferrous metals, such as aluminum and brass, hard woods, and plastics.

Aluminum oxide J-Wt plus sanding belts are made of 100% egyptian cotton and have a grinding aid which not only cools, but acts as an anti-clogging agent. J-Flex belts will conform to highly contoured surfaces and provide superior finishing and polishing. These abrasive sanding belts are excellent for chrome, stainless steel, brass, titanium, bronze and hard woods.

Silicon Carbide Sanding Belts - S/C W/D

Silicon carbide wet or dry Y-Wt polyester sanding belts are designed for heavy duty, more aggressive applications. They are 100% waterproof and are sharp cutting. They are used on non-ferrous metals, marble, plastic, glass, rubber and fiberglass.

Ziconia Alumina Sanding Belts - Zirc, ZircPlus

Zirconia alumina sanding belts are resin bonded and closed coated. They are aggressive and self sharpening. This sanding belt is excellent on stainless and other tough metals.

Zirconia alumina plus sanding belts have a grinding aid for a cooler cut and faster stock removal on stainless steel. They are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.

Ceramic Grain Sanding Belts

Ceramic grain sanding belts are also resin bonded and closed coated. This belt outlasts both aluminum oxide and zirconia alumina belts while cutting faster and cooler. This sanding belt is best suited for grinding and sanding stainless and other tough metals.



6x9 Hand Pads

6x9 Hand Pads

AA Abrasives Hand Pads are extremely comformable and are an excellent alternative to steel wool. These non woven abrasive hand pads are non-rusting and non-loading, and are excellent with solvents. They provide a uniform, clean finish and are perfect for blending grains. Hand pads are excellent on all types of metal and are effective defuzzing on wood products. Our hand pads are reusable and color coded for ease of use for all of your abrasive needs.
Size 6 x 9.


Non-Woven Rolls (30 Feet Length), 1"-12"

Non-Woven Rolls (30 Feet Length), 1"-12"

AA Abrasives non-woven rolls are helpful when longer lengths are required for your manual or machine operations. Excellent cost effective alternative to hand pads.


Convolute Wheels

Convolute Wheels

AA Abrasives Convolute Wheels come in a variety of sizes and densities to meet your metal finishing needs.


Surface Conditioning Discs, Premium & Premium Plus (Ceramic Coated) Roll-on (T-R) & Turn-on (T-S)

Surface Conditioning Discs, Premium & Premium Plus (Ceramic Coated) Roll-on (T-R) & Turn-on (T-S)

AA Abrasives Surface Conditioning Discs come in premium and premium plus -ceramic
Option of Roll On -- T-R or Turn on -- T-S

Quick-Lok Surface Conditioning discs Premium - Type R Locking System - 3/4"-4"
Quick-Lok Surface Conditioning discs Premium - Type S Locking System - 3/4"-4"
Quick-Lok Surface Conditioning discs Premium Plus XE-Ceramic-Type R Locking System - 3/4"-4"
Quick-Lok Surface Conditioning discs Premium Plus XE-Ceramic-Type S Locking System - 3/4"-4"





Surface Conditioning Discs, Premium & Premium Plus (Ceramic Coated), Hook & Loop, 2"-8" (No Hole & With Arbor Hole)

Surface Conditioning Discs, Premium & Premium Plus (Ceramic Coated), Hook & Loop, 2"-8" (No Hole & With Arbor Hole)

AA Abrasives Surface Conditioning Discs - Premium and Premium Plus choose from the following:

-Quick-lok surface conditioning disc premium - Hook and Loop Discs No Hole
-Quick-lok surface conditioning disc premium - Hook and Loop Discs With Arbor Hole
-Quick-lok surface conditioning disc premium plus - Hook and Loop Discs No Hole
-Quick-lok surface conditioning disc premium plus - Hook and Loop Discs With Arbor Hole








Surface Conditioning Wheels, Unmounted & Mounted on 1/4" Shank

Surface Conditioning Wheels, Unmounted & Mounted on 1/4" Shank

AA Abrasives mounted and unmounted surface conditioning wheels on a 1/4" shank. Choose from flap finishing wheels, unmounted interleaf flap wheels, mounted interleaf flap wheels, finishing flap brush and mounted stacked disc wheels.


Surface Conditioning Flap Discs

Surface Conditioning Flap Discs

AA Abrasives premium surface conditioning material for surface preparation. Available in three different grits for blending, deburring and cleaning. For steel and stainless steel.



Unitized Right Angle Grinding & Polishing Wheels

Unitized Right Angle Grinding & Polishing Wheels

AA Abrasives Premium Unitized Wheels designed specifically for right angle grinders have a strong fiberglass backing so no back up pads are required. Unitized Wheel Applications Include: Deburring, Cleaning, Surface Blending, Finishing and Polishing a wide range of parts and materials. These Unitized Wheels are great on all Metals, (Stainless Steel, Titanium, Aluminum, and Alloys), Plastics and Composite.
Specifications:
2SF- Medium Density Silicon Carbide Fine Unitized Wheel. Very Conformable, Nice Final Finish on all Materials.
3SF- Hard Density Silicon Carbide Fine Unitized Wheel. Longer Life, Slight Stock Removal with Strong Edge Durability Leaves a Fine Finish. Very good on Stainless Steel.
6AM- Hard Density Aluminum Oxide Medium Unitized Wheel. Coarser Grit with Stock Removal and High Cut Rate. Long Life and very Strong edge. Great on Stainless and other Metals.



Surface Preparation Wheels

Surface Preparation Wheels

AA Abrasives Premium Surface Preparation Wheels designed specifically for right angle grinders have a durable Plastic backing so no back up pads are required. Abrasive applications for surface preparation wheels Include: Lite Deburring, Cleaning, Surface Blending, Finishing, Polishing and paint removal on a wide range of parts and materials. Great on all Metals - Stainless Steel, Titanium, Aluminum, and Alloys and Plastics and Composite.
Surface Preparation Wheel Specifications:
AFine- Soft Density Aluminum Oxide Fine, Very Conformable-Soft. Nice Final Finish On All Metals
S/CFine- Soft Density Silicon Carbide Fine, Very Conformable-Soft. Nice Final Finish On All Metals



Surface Conditioning Rolls - Interleaf Finishing Rolls, Non-Woven Finishing Rolls, Felt Polishing Flap Rolls and Felt Flap Roll Brushes (With 5/8-11 Hubbing or With 3/4" Arbor Keyway)

Surface Conditioning Rolls - Interleaf Finishing Rolls, Non-Woven Finishing Rolls, Felt Polishing Flap Rolls and Felt Flap Roll Brushes (With 5/8-11 Hubbing or With 3/4" Arbor Keyway)

AA Abrasives Surface Conditioning Rolls for use on a variety of Dynabrade, Walter, Metabo and CS Unitec industrial abrasive tools:

- Interleaf Finishing Rolls
- Non-woven Finishing Rolls
- Felt Polishing Flap Rolls
- Felt Flap Roll Brushes


Strip-It Products (Lava Wheels)

Strip-It Products (Lava Wheels)

AA Abrasives Strip-It products, (Lava Wheels), are made of abrasive grains and resins which are bonded to a strong nylon filament, which resemble black lava. Lava wheels are recommended for aggressive mechanical cleaning operations. The pourous structure of lava wheels allows for reduced loading and a cooler cut. Strip-It Lava Wheels are excellent for providing consistent surface finishes. Applications for Lava Wheels include but are not limited to metal working, fiberglass, plastic, automotive, marine, and cleaning of cement and stone.


Surface Conditioning Belts

Surface Conditioning Belts

Surface Conditioning Belts

AA Abrasives offers surface conditioning belts for air files, expandable drums and other hand held belt tools. Extra stretch for short belts and low stretch backing for wide and long belts.



Depressed Center Grinding Wheels, Premium A/O, Stainless Steel, Aluminum, Zirconia Alumina, Concrete, Type 27 (3/16" & 1/4" Thick)

Depressed Center Grinding Wheels, Premium A/O, Stainless Steel, Aluminum, Zirconia Alumina, Concrete, Type 27 (3/16" & 1/4" Thick)

AA Abrasives Depressed Center Grinding Wheels - Type 27
Grinding Wheels are sometimes called depressed center wheels or raised hub wheels or by their shape designation of “Type”, with Type 27 being the most popular. The depressed center design allows the flange/lock nut to recess within the grinding wheel so that it can be used for various grinding and cutting applications. Depressed center wheels are designed to handle the most severe right angle grinding applications from heavy stock removal to rough blending. More recently, depressed center wheels have been designed to increase the utility of the right angle grinder for cut-off applications. While large right angle grinders (7" & 9") have been around for many years, small or mini grinders that use 4", 4-1/2" and 5" wheels making this machine, and wheel category, one of the most popular in power tool applications.


Rex-Cut Products

Rex-Cut Products

Rex-Cut cotton reinforced wheels are designed to be used for a variety of applications where metal removal and a nice finish is required. Their special bond differs from conventional bonded abrasives which enables them to grind and finish metals at the same time.

GFX Bond
GFX bond is designed for fine finishing, blending and polishing applications on ferrous and non-ferrous metals. GFX bond is resilient for use on contours and resists loading. These wheels are ideal for stainless steel applications.

MTX Bond
MTX Bond is designed for light or medium weld removal. MTX bond is resilient for use on contours and flat surfaces. User can easily control cutting rates by amount of pressure applied. They resist loading and offer excellent finishes for grinding aluminum and other ferrous materials. They are excellent on aluminum.


Depressed Center Grinding Wheels, Premium A/O, Zirconium, Concrete, Type 28

Depressed Center Grinding Wheels, Premium A/O, Zirconium, Concrete, Type 28



AA-Flex Wheels (Dimple Wheels), Type 27 & Type 29

AA-Flex Wheels (Dimple Wheels), Type 27 & Type 29

AA-Flex wheels offer one step grinding and finishing. They are constructed of aluminum oxide grains bonded to a strong, slightly flexible fiberglass reinforcing and have dimples on the grinding surface. AA-Flex wheels will remove stock much like a resin bond depressed center wheel and finish like a resin fiber disc. Excellent on stainless steel and aluminum.


Waffle Wheels-Flex-Grind-Finish-FGF Wheels

Waffle Wheels-Flex-Grind-Finish-FGF Wheels

AA Abrasives Waffle Wheels

Flex-Grind-Finish-FGF Wheels

AA Abrasives, Inc. introduces our newest wheel for grinding and finishing metals in one step. The AA Abrasives Waffle Wheels-Flex-Grind-Finish-FGF-Wheels are a reinforced resin bonded wheel with a flexible structure for multiple tasks. The Waffle Wheel-Flex-Grind-Finish-FGF is made of a white aluminum oxide grain for contaminate-free results and is recommend for metal, aluminum, non-ferrous metals, stainless and regular steel. The face waffle pattern of the Waffle Wheels-Flex-Grind-Finish-FGF-Wheels is designed for cooler grinding and minimal material load up for a smooth finish. The flexibility of the waffle pattern on the face wheel is recommended on contours and is engineered to absorb vibrations to reduce operator fatigue.



Heavy Duty Flaring Cup Grinding Wheels, A/O, Zirconium, S/C Concrete, Type 11

Heavy Duty Flaring Cup Grinding Wheels, A/O, Zirconium, S/C Concrete, Type 11

AA Abrasives Flaring Cup Grinding Wheels - Type 11
Flaring Cup Grinding Wheels are cup shaped grinding wheels sometimes called Flared Cup Wheels or simply Cup Wheels.

Choose from:

- Heavy Duty Flaring Cup Grinding Wheels Type 11 A/O for Rt Angle Grinders 4/3"-6/4"
- Heavy Duty Flaring Cup Grinding Wheels Type 11 Zirconium for Rt Angle Grinders 4/3"-6/4"
- Heavy Duty Flaring Cup Grinding Wheels Type 11 Concrete for Rt Angle Grinders 4/3"-6/4"


Made in the USA!


Heavy Duty Straight Grinding Wheels, Resin Bond, A/O, Zirconium, Type 1

Heavy Duty Straight Grinding Wheels, Resin Bond, A/O, Zirconium, Type 1



Threaded Plug and Tapered Wheels, Resin Bond, A/O, T-16 Cone, T-17 Cone, T-18 Plug, T-18R Plug

Threaded Plug and Tapered Wheels, Resin Bond, A/O, T-16 Cone, T-17 Cone, T-18 Plug, T-18R Plug

AA Abrasives Premium Aluminum Oxide Threaded Plug and Tapered Wheels are resin bonded. A16R and A20R grains are designed for tougher metals where consistent stock removal and wheel life is important. Designed for hard to reach areas. A16R and A20R grains are our most popular sellers. Designed for high RPM grinders. Made in USA.


Mounted Points, Resin Bond, A/O A36R 1/4 sk.

Mounted Points, Resin Bond, A/O A36R 1/4 sk.

AA Abrasives resin bonded mounted points are made of premium aluminum oxide and designed for a high RPM die grinders. They are excellent for weld removal on hard to reach areas on metal and stainless steel.



Specialty Cutting, Notching, Pipeline, Light Grinding Wheels, & Thin Wheels, Type 27, Resin Bond, A/O, Zirconia Alumina & Concrete (3/32", 1/8" & .045 Thick)

Specialty Cutting, Notching, Pipeline, Light Grinding Wheels, & Thin Wheels, Type 27, Resin Bond, A/O, Zirconia Alumina & Concrete (3/32", 1/8" & .045 Thick)



Specialty Cutting Thin Wheels for Right Angle Grinders, Thin High Speed Cut-Off Wheels,T-1 (1/32", 1/16", 1/8", .045, .040 & .035 Thick)

Specialty Cutting Thin Wheels for Right Angle Grinders, Thin High Speed Cut-Off Wheels,T-1 (1/32", 1/16", 1/8", .045, .040 & .035 Thick)



Chop Saw Wheels, Stationary Cut-Off Wheels, High Speed Cut-Off Wheels for Portable Saws, A24R Metal, C24R Masonry, AC24R Ductile Iron, A30N Aluminum (7/64", 3/32", 5/32", 3/16" & 1/8" Thick)

Chop Saw Wheels, Stationary Cut-Off Wheels, High Speed Cut-Off Wheels for Portable Saws, A24R Metal, C24R Masonry, AC24R Ductile Iron, A30N Aluminum (7/64", 3/32", 5/32", 3/16" & 1/8" Thick)



Bench & Pedestal Grinding Wheels

Bench & Pedestal Grinding Wheels



Depressed Center Cutting and Grinding Wheels T-27

Depressed Center Cutting and Grinding Wheels T-27

Depressed center wheels are sometimes referred to as raised hub wheels or by their shape designation of “Type”, with Type 27 being the most popular. The depressed center design allows the flange/lock nut to recess within the grinding wheel so that it can be used for various grinding and cutting applications. Depressed center wheels are designed to handle the most severe right angle grinding applications from heavy stock removal to rough blending. More recently, depressed center wheels have been designed to increase the utility of the right angle grinder for cut-off applications. While large right angle grinders (7" & 9") have been around for many years, small or mini grinders that handle 4", 4-1/2" and 5" grinding and cutting wheels have made this machine, and wheel category, one of the most popular in power tools.


Tool Room Surface Grinding Wheels

Tool Room Surface Grinding Wheels



Tool & Cutter Grinding Wheels

Tool & Cutter Grinding Wheels

The shape of the wheel is determined by the shape, size, and accessibility of the part to be ground. When grinding peripheral cutters, cup wheels are used. Dish wheels are best for formed cutters.

WA White Premium Aluminum Oxide

Used when a good cutting action is needed on all steels. When a sharp corner or radius must be held, use fine grits combined with J 0r K hardness.

GC Green Silicon Carbide

Used for non-ferrous metals such as cemented materials.

AS3 Ceramic

Our AS3 wheels feature a 30% advanced Cubitron 321 ceramic content combined with a 20% premium pink aluminum oxide grain and 50% white aluminum oxide grain that delivers cooler cuts on harder surfaces for maximum performance and life. This unique combination continually fractures, producing sharp new grinding points. Best used when heavy stock removal is necessary. Ceramic wheels are designed to grind without burn and hold form much better. They are excellent for corner and form holding applications. They exceed standard wheels when grinding materials 50 Rockenell C and harder. They're ideal for hardened tool steels, sprayed metal coatings, Iconel, Waspalloy, Hastalloy, Stellite and other high-temp alloys. In tool room applications, the AS3 will yield better results in dry grinding than conventional abrasives. They allow heavier downfeeds and faster traverse rates. Dressing is only required to restore the shape of the wheel. ISO 9002 certified quality.


Vitrified Mounted Points, A-Shape, B-Shape, W-Shape

Vitrified Mounted Points, A-Shape, B-Shape, W-Shape

Vitrified mounted points are made from premium pink aluminum oxide grain for fast cutting and clean finishing. They are precise dimensions, balanced and securely mounted to 1/4" or 1/8" steel shanks. Applications include deburring, tool sharpening, finishing cavities and removing mold marks and parting lines. In stock.



Vitrified Mounted Stone Sets

Vitrified Mounted Stone Sets



Wire Brush Products, AA Abrasives Brand

Wire Brush Products, AA Abrasives Brand

AA Abrasives brand wire wheels are manufactured with state of the art technology and materials. They are quality tested and out perform most major brand name wire wheels. They are an excellent option for the cost conscience consumer who isn't willing to sacrifice quality. Most heavy duty manufacturers stay with our brand after evaluating their cost per piece count.


Saw Blades, Recip Blades, Portable & Stationary Band Saw Blades, Hole Saws

Saw Blades, Recip Blades, Portable & Stationary Band Saw Blades, Hole Saws

AA Abrasives has a wide variety of saw blades. Browse our selection of saw blades, recip blades, portable band saw blades, stationary band saw blades and hole saw blades.


Carbide Rotary Files, (Burrs)

Carbide Rotary Files, (Burrs)

All carbide burrs have a 1/4" shank. All burrs with a 1/4" diameter and under are solid carbide, all burrs over 1/4"" diameter have hardened steel shanks. A super cut is standard on all burrs. Resharpening and extra long shanks are available. All burrs provide an accurate and precise cut.



RESIN FIBER DISC ACCESSORIES

RESIN FIBER DISC ACCESSORIES

Our backing pad is specially designed to allow air flow behind the sanding disc, substantially increasing the life of the disc. Note: Thread sized for backing pads and disc nuts are available on special orders. Please specify model number and machine make on which accessories are to be used. AA Abrasives offers Spiracool rubber back up pads and disc nuts for use with resin fiber sanding discs.



Files

Files

AA Abrasives Files and File Sets

 

Bastard Cut - Coarse teeth for rapid material removal

Second Cut - Medium teeth for moderate material removal

Smooth Cut - Fine teeth for a smooth finish



Buffing and Polishing Products & Polishing Machines

Buffing and Polishing Products & Polishing Machines



PSA ABRASIVE DISC HOLDERS, 1" - 6"

PSA ABRASIVE DISC HOLDERS, 1" - 6"

Our abrasive disc holders are constructed of soft flexible rubber. This allows for flex and consistency when needed without digging or deforming.


BACK UP PADS FOR QUICK CHANGE T-R, BUTTON STYLE, SANDING DISCS & SURFACE CONDITIOING DISCS, 1"-4"

BACK UP PADS FOR QUICK CHANGE T-R, BUTTON STYLE, SANDING DISCS & SURFACE CONDITIOING DISCS, 1"-4"

Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with 3M Roloc System


BACK UP PADS FOR QUICK CHANGE T-S, TURN-ON STYLE, SANDING DISCS & SURFACE CONDITIOING DISCS, 1" - 4"

BACK UP PADS FOR QUICK CHANGE T-S, TURN-ON STYLE, SANDING DISCS & SURFACE CONDITIOING DISCS, 1" - 4"

Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with Norton Speed-Lok System


HOOK & LOOP ABRASIVE DISC HOLDER FOR SANDPAPER DISCS,  5" & 6"

HOOK & LOOP ABRASIVE DISC HOLDER FOR SANDPAPER DISCS, 5" & 6"

Hook & Loop disc holder have a tight loop grip surface engineered specifically for paper sanding discs. These hook and loop disc holders are easy to use, quick changing, and excellent on flat and contour surfaces.


ADAPTER SHANKS FOR 1/4-20 THREAD

ADAPTER SHANKS FOR 1/4-20 THREAD

Adapter shanks for 1/4-20 threaded mandrels are made of hardened steel and are reusable. They extend shank length wear.


CARTRIDGE ROLL MANDRELS

CARTRIDGE ROLL MANDRELS

For use with AA Abrasives Cartridge Rolls, hardened steel with plated finish. All mandrels have a 1/4" shank. Designed for high speed drills and die grinders. Made in USA.



NO LAP RUBBER DRUMS, 1/2"-3"

NO LAP RUBBER DRUMS, 1/2"-3"

For use with AA Abrasives No Lap Bands. Speed balanced for high performance. Made from 60 durometer live rubber which enhances controlled expansion. Designed for high speed drills and die grinders. Made in USA.



BACK UP PADS FOR QUICK CHANGE SURFACE CONDITIONING DISCS HOOK & LOOP STYLE, 2"-8"

BACK UP PADS FOR QUICK CHANGE SURFACE CONDITIONING DISCS HOOK & LOOP STYLE, 2"-8"

Hook & Loop style back up pads have a loose loop grip surface engineered specifically for surface conditioning discs. They are easy to use and quick changing. They are excellent on flat and contour surfaces.


REUSABLE ADAPTER ASSEMBLY

REUSABLE ADAPTER ASSEMBLY

AA Abrasives reusable adapter assemblies can be used for 7" and 9" type 27 or type 28 depressed center wheels. They have a 5/8-11 thread and heavy duty construction. They are simple to use and cost effective.


CUT OFF WHEEL MANDRELS

CUT OFF WHEEL MANDRELS

Mandrels are designed for wheel widths up to 1/4". The body and screw head have a 3/4" diameter. The overall length is 2-1/2".


BACK UP PADS FOR REX-CUT QUICK CHANGE DISCS, ROLL-ON STYLE, T-R, 1-1/2" - 4"

BACK UP PADS FOR REX-CUT QUICK CHANGE DISCS, ROLL-ON STYLE, T-R, 1-1/2" - 4"

Type-R back up pads are interchangeable with 3M Roloc System. They operate at a high RPM and are ideal for die grinders and flexible shafts. They have a tough 1/4" steel shank.


DYNABRADE ABRASIVE BELT TOOLS

DYNABRADE ABRASIVE BELT TOOLS

Dynabrade® Abrasive Sanding Belt Tools

Great for sanding, deburring, finishing and polishing.

World famous abrasive sanding belt tools. Great for sanding, deburring, finishing and polishing.

See all Dynabrade® Abrasive Sanding Belt Tools



DYNABRADE ABRASIVE FINISHING TOOLS

DYNABRADE ABRASIVE FINISHING TOOLS

Dynabrade® Abrasive Finishing Tools

Air-Powered Finishing Tools to meet your specifications. Metal finishing has long been a specialty of Dynabrade. Our Dynastraight® and Dynisher family of tools are specifically designed for this application.

See all Dynabrade® Abrasive Finishing Tools



DYNABRADE RANDOM ORBITAL SANDERS

DYNABRADE RANDOM ORBITAL SANDERS

Dynabrade® Random Orbital Sanders

Air Powered Random Orbital Sanders

A random orbital motion is produced by both the spinning of the sanding disc and the movement of the disc in an elliptical pattern. This ensures that no single part of the abrasive material moves in the same path twice. This unique sanding action is designed so that there are no perceivable swirl marks on the work surface.

See all Dynabrade Dynorbital Random Orbital Sanders



DYNABRADE SILVER SUPREME RANDOM ORBITAL SANDERS

DYNABRADE SILVER SUPREME RANDOM ORBITAL SANDERS

Dynabrade Silver Supreme Random Orbital Sanders

The Most Durable Random Orbital Sanders Ever Built!

This is the ultimate combination of Supreme Power and lightweight comfort with Ergo grip, outstanding vacuum capabilities and more.

Non-vacuum Dynabrade® Dynorbital Silver Supreme:

See all Dynabrade Dynorbital Silver Supreme Random Orbital Sanders



DYNABRADE DRILLS & SPECIALTY TOOLS

DYNABRADE DRILLS & SPECIALTY TOOLS

Dynabrade® Drills and Specialty Tools

See all Dynabrade Drills and Specialty Tools



DYNABRADE GRINDING TOOLS

DYNABRADE GRINDING TOOLS

Dynabrade® Grinding Tools

See all Dynabrade Grinding Tools



DYNABRADE SANDERS, GEAR-DRIVEN & FINISHING SANDERS

DYNABRADE SANDERS, GEAR-DRIVEN & FINISHING SANDERS

Dynabrade® Sanders

See all Dynabrade Sanders



DYNABRADE DUST COLLECTION SYSTEMS

DYNABRADE DUST COLLECTION SYSTEMS

Dynabrade® Dust Collection Systems

Control dust and contamination while sanding. 

See all Dynabrade Dust Collection Systems



DYNABRADE ACCESSORIES

DYNABRADE ACCESSORIES

Dynabrade® Accessories

See all Dynabrade Accessories



DYNABRADE CONTACT ARMS

DYNABRADE CONTACT ARMS

Dynabrade Contact Arm Assemblies

Dynabrade has dozens of Contact Arm designs available to help you with your various applications. See the links below to help you select the correct Contact Arm for your particular Dynafile® abrasive sanding belt tool and application.

See all Dynabrade Contact Arm Assemblies



DYNABRADE ABRASIVES

DYNABRADE ABRASIVES

Dynabrade Abrasives

See all Dynabrade Abrasives



NORTON ABRASIVES -  BONDED ABRASIVES

NORTON ABRASIVES - BONDED ABRASIVES

Norton Grinding Wheels-Norton Bonded Abrasives

Norton Abrasives - Norton Bonded abrasives and grinding wheels will meet all your rough and precision application needs from aggressive zirconia alumina snagging wheels to precision metallurgical cut-off wheels to premium ceramic toolroom wheels with grinding wheels, depressed center wheels, cut-off wheels, snagging wheels, surface grinding segments, mounted points, cones and plugs. Buy Norton Abrasives - Norton Bonded Abrasives when you require the highest performance abrasives available to the industrial manufacturing community.

See all Norton Abrasives Grinding Wheels & Bonded Abrasives



NORTON ABRASIVES -  WIRE BRUSHES

NORTON ABRASIVES - WIRE BRUSHES

Norton Abrasives - Norton Wire Brush

Norton Abrasives - Norton Wire Brush offering includes all the basic shapes and configurations: cups, saucer cups, wheels, end brushes and hand brushes – in standard and full cable twist knot, crimped and stringer bead designs. Buy Norton Abrasives - Norton Wire Brushes when you require the highest performance abrasives available to heavy duty manufacturers.

See all Norton Abrasives Wire Brush Products



NORTON ABRASIVES -  SHARPENING STONES AND ABRASIVE HAND TOOLS

NORTON ABRASIVES - SHARPENING STONES AND ABRASIVE HAND TOOLS

Norton Abrasives Sharpening Stones and Norton Abrasives Hand Tools

Norton Abrasives complete line of Norton Sharpening and Finishing Stones delivers the superior performance you want. Norton is the leading supplier of benchstones, files, slips and rubbing bricks. Buy Norton Abrasives - Norton Sharpening Stones and abrasive hand tools when you require the highest performance abrasives available to tool and die shops.

See all Norton Abrasives Sharpening Stones



NORTON ABRASIVES -  COATED ABRASIVES

NORTON ABRASIVES - COATED ABRASIVES

Norton Abrasives - Coated Abrasive Products

We carry a full line Norton Abrasives - Norton Coated Abrasive products encompass a wide range of sanding belts, quick change discs, PSA discs, sandpaper rolls, sand paper sheets, cloth sanding sheets, abrasive sponges and flap wheels for all your MRO and production needs: stock removal, dimensioning, grinding, deburring, cleaning, blending, polishing and finishing. Buy Norton Abrasives - Norton Coated Abrasives when you require the highest performance abrasives available to industrial fabricators.

See all Norton Abrasives - Coated Abrasives Products



NORTON ABRASIVES - SURFACE FINISHING PRODUCTS

NORTON ABRASIVES - SURFACE FINISHING PRODUCTS

Norton Abrasives - Bear-Tex Surface Finishing products are made of a non-woven nylon web impregnated with abrasive grain and resin. A large assortment of abrasives, grit sizes and backing materials give the user an extensive and superior product offering. Typical applications include light- to heavy-duty cleaning, deburring, blending, polishing and finishing. Buy Norton Abrasives - Surface Finishing products when you require the highest performance abrasives available to metal fabrication shops.

Popular Norton Surface Finishing Products-Ready to Ship

See all Norton Abrasives Bear-Tex Surface Finishing Products



NORTON ABRASIVES -  SUPERABRASIVES

NORTON ABRASIVES - SUPERABRASIVES

Norton Abrasives-Norton Superabrasives

Norton Abrasives - Norton Superabrasive (Diamond and CBN) line includes resin, vitrified, metal and MSL wheels/blades, stationary and rotary truing and dressing tools; electroplated products, and lapping compound to meet the demands of precise applications including more toolroom, CNC, saw grinding, and made-to-order wheels. Buy Norton Abrasives - Norton Superabrasives when you require the highest performance abrasives available to precision manufacturers.

See all Norton Abrasives - Superabrasives



MERIT ABRASIVES - COATED ABRASIVES

MERIT ABRASIVES - COATED ABRASIVES

Merit Abrasives - Coated Abrasives

Merit Abrasives - Coated Abrasives product line encompasses a complete range of belts, discs, rolls, sheets and flap wheels for all your MRO and production needs, such as stock removal, dimensioning, grinding, deburring, cleaning, blending, polishing and finishing.



MERIT ABRASIVES - SURFACE FINISHING PRODUCTS

MERIT ABRASIVES - SURFACE FINISHING PRODUCTS

Merit Abrasives - Merit Non-woven Surface Finishing products have the versatility to tackle any job, whether you need to clean and remove imperfections on metal surfaces, clean built-up residue, deburr or finish a variety of surfaces, blend weld seams or create decorative finishes.


WEILER BRUSH - WEILER KNOT WIRE END BRUSHES - HOLLOW END, EBB SERIES - STEEL, STAINLESS & BRONZE

WEILER BRUSH - WEILER KNOT WIRE END BRUSHES - HOLLOW END, EBB SERIES - STEEL, STAINLESS & BRONZE

Weiler Knot Wire End Brush - Rugged knot-type construction provides aggressive, high-impact action for severe applications.


WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - BANDED - SOLID END, EBR SERIES - STEEL, STAINLESS & ALUMINUM

WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - BANDED - SOLID END, EBR SERIES - STEEL, STAINLESS & ALUMINUM

Weiler Crimped Wire End Brushes - Banded brushes provide shorter trim length which prevents flaring and provides more aggressive brushing action.


WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - COATED CUP, EBA SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - COATED CUP, EBA SERIES - STEEL & STAINLESS

Weiler Crimped Wire End Brushes - Protect the work surface from being scratched or marked.


WEILER BRUSH - WEILER KNOT WIRE END BRUSHES - BANDED, EBBR SERIES - STEEL

WEILER BRUSH - WEILER KNOT WIRE END BRUSHES - BANDED, EBBR SERIES - STEEL

Weiler Knot Wire End Brush - Banded brushes provide shorter trim for maximum aggression.


WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - SOLID END, EBA SERIES - STEEL, BRASS & STAINLESS

WEILER BRUSH - WEILER CRIMPED WIRE END BRUSHES - SOLID END, EBA SERIES - STEEL, BRASS & STAINLESS

Weiler Crimped Wire End Brushes - For light duty, general purpose applications.


WEILER BRUSH - WEILER END BRUSHES (BANDED) - SILICON CARBIDE - MOUNTED ON 1/4" STEMS, EBR SERIES

WEILER BRUSH - WEILER END BRUSHES (BANDED) - SILICON CARBIDE - MOUNTED ON 1/4" STEMS, EBR SERIES

Weiler Nylox End Brushes- Banded-Crimped Round Silicon Carbide Filament-Mounted on 1/4" Stems


WEILER BRUSH - WEILER END BRUSHES - ABRASIVE NYLON FILL - PLASTIC FERRULE, ME SERIES

WEILER BRUSH - WEILER END BRUSHES - ABRASIVE NYLON FILL - PLASTIC FERRULE, ME SERIES

Weiler End Brushes - abrasive nylon fill - Ideal for deburring and finishing in confined areas.


WEILER BRUSH - WEILER END BRUSHES - BRISTLE FILL - PLASTIC FERRULE, ME SERIES

WEILER BRUSH - WEILER END BRUSHES - BRISTLE FILL - PLASTIC FERRULE, ME SERIES

Weiler End Brushes - Plastic ferrule protects molds and dies during interior polishing.


WEILER BRUSH - WEILER END BRUSHES - BRISTLE FILL, ME SERIES

WEILER BRUSH - WEILER END BRUSHES - BRISTLE FILL, ME SERIES

Weiler end brushes - Ideal for polishing in confined areas.



WEILER BRUSH - WEILER END BRUSHES - SILICON CARBIDE - MOUNTED ON 1/4" STEMS, EBA SERIES

WEILER BRUSH - WEILER END BRUSHES - SILICON CARBIDE - MOUNTED ON 1/4" STEMS, EBA SERIES

Weiler Nylox End Brushes-Crimped Round Silicon Carbide Filament-Mounted on 1/4" Stems.



WEILER BRUSH - WEILER END BRUSHES - WIRE FILL, ME SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER END BRUSHES - WIRE FILL, ME SERIES - STEEL, STAINLESS & BRASS

Weiler End Brushes - Ideal for light cleaning and deburring in confined areas.



WEILER BRUSH - WEILER TIGER PAW XHD SUPER HIGH DENSITY FLAP DISCS-FLAT STYLE TYPE 27-PHENOLIC BACKING-ZIRCONIUM GRAIN

WEILER BRUSH - WEILER TIGER PAW XHD SUPER HIGH DENSITY FLAP DISCS-FLAT STYLE TYPE 27-PHENOLIC BACKING-ZIRCONIUM GRAIN

Weiler Tiger Paw Super High Density Flap Discs feature thicker and larger flaps that conform to curved and irregular shapes while producing a consistent finish. These flap high density flap discs are designed for the user looking for extended life and conformability in heavy duty applications.


DYNABRADE STATIONARY MACHINES

DYNABRADE STATIONARY MACHINES

Dynabrade® Stationary Machines

See all Dynabrade Stationary Machines



DYNABRADE BUFFERS/POLISHERS/SANDERS

DYNABRADE BUFFERS/POLISHERS/SANDERS

Dynabrade® Buffers-Polishers-Sanders

See all Dynabrade Buffers-Polishers-Sanders



WEILER BRUSH - WEILER TIGER PAW  FLAP DISCS-ANGLED STYLE TYPE 29 & FLAT STYLE TYPE 27 -PHENOLIC BACKING-ZIRCONIUM GRAIN

WEILER BRUSH - WEILER TIGER PAW FLAP DISCS-ANGLED STYLE TYPE 29 & FLAT STYLE TYPE 27 -PHENOLIC BACKING-ZIRCONIUM GRAIN

Weiler Tiger Paw Flap Discs are designed for aggressive performance on tough EDGE grinding applications. These 100% zirconium flap discs last 30-40% longer than competitive standard zirconium flap discs due to both a high performance grain and special poly cotton cloth that provides superior grain retention. Weiler Tiger Paw Angled and Flat Style Flap Discs are designed for the user looking for aggressive performance and long life in heavy-duty applications like edge grinding. Typical applications include weld blending, deburring, deflashing, stock removal, surface finishing, edge chamfering, etc.


DYNABRADE DROP-IN MOTORS

DYNABRADE DROP-IN MOTORS



WEILER BRUSH - WEILER WHEEL BRUSHES - BRISTLE FILL, 12 & MK SERIES

WEILER BRUSH - WEILER WHEEL BRUSHES - BRISTLE FILL, 12 & MK SERIES

Weiler Bristle Fill Wheel Brushes - Polishing narrow areas with abrasive of buffing compound.


DYNABRADE MOTOR TUNE-UP KITS

DYNABRADE MOTOR TUNE-UP KITS



WEILER BRUSH - WEILER DRIVE ARBORS - Unthreaded Shaft

WEILER BRUSH - WEILER DRIVE ARBORS - Unthreaded Shaft



WEILER BRUSH - WEILER CRIMPED WIRE BEVEL BRUSHES, BV SERIES - STEEL

WEILER BRUSH - WEILER CRIMPED WIRE BEVEL BRUSHES, BV SERIES - STEEL

Weiler Crimped Wire Brushes provide more flexibility than a knot wire brush for aggressive cleaning action in corners.


WEILER BRUSH - WEILER KNOT WIRE BEVEL BRUSHES, BVK SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER KNOT WIRE BEVEL BRUSHES, BVK SERIES - STEEL & STAINLESS

Weiler Knot Wire Wheels - Standard Twist Bevel Brushes - Saucer shaped radial wheels which provide a heavy duty brushing action with some flexibilty. Maximum aggression for cleaning filet welds and into corners.


WEILER BRUSH - WEILER SMALL DIAMETER WHEELS - WIRE FILL, C SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

WEILER BRUSH - WEILER SMALL DIAMETER WHEELS - WIRE FILL, C SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

Weiler Small Diameter Crimped Wire Wheels feature a plain arbor hole for use on a variety of portable tools and stationary machines. Featuring Weiler's solid ring construction for high speed use-these radial brushes are available in heat-treated steel - Type 302 stainless steel - brass wire. These Wire Wheels are identifiable by their copper center.


WEILER BRUSH - WEILER CONCAVE BRUSHES - NARROW FACE CONCAVE WIRE WHEELS, CFF SERIES - STELL & STAINLESS

WEILER BRUSH - WEILER CONCAVE BRUSHES - NARROW FACE CONCAVE WIRE WHEELS, CFF SERIES - STELL & STAINLESS

Weiler Concave Brushes - For cleaning and deburring off-hand or on a drill press.


WEILER BRUSH - WEILER CONFLEX BRUSHES, CFX SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER CONFLEX BRUSHES, CFX SERIES - STEEL, STAINLESS & BRASS

Weiler Narrow Face Crimped Wire Wheels for light-duty brushing action.

Wide Face Crimped Wire Wheels cover a broader surface area.


WEILER BRUSH - WEILER SMALL DIAMETER NYLON WHEELS, CN SERIES

WEILER BRUSH - WEILER SMALL DIAMETER NYLON WHEELS, CN SERIES

Weiler's Nylon Wheel Brushes are filled with non-metallic filaments for light duty surface cleaning and scrubbing applications as well as scratch free finishing and polishing. Nylon is resistant to most chemicals and displays excellent bend recovery.


WEILER BRUSH - WEILER CRIMPED WIRE CUP BRUSHES, CR, CRA & RCR SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

WEILER BRUSH - WEILER CRIMPED WIRE CUP BRUSHES, CR, CRA & RCR SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

Weiler Crimped Wire Cup Brushed - For light to medium duty, general purpose cleaning of large surfaces.


WEILER BRUSH - WEILER SMALL DIAMETER TAMPICO WHEELS, CT SERIES

WEILER BRUSH - WEILER SMALL DIAMETER TAMPICO WHEELS, CT SERIES

Weiler - Tampico wheel brushes filled with non-metallic filaments are primarily intended for light-duty cleaning and scrubbing applications as well as scratch-free finishing and polishing. Tampico wheels feature a durable vegetable fiber fill material that is chemical and heat resistant and also holds abrasive compounds well and can be used for buffing-deburring-edge blending and polishing applications.


WEILER BRUSH - WEILER CABLE TWIST WHEELS, CT & CTA SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER CABLE TWIST WHEELS, CT & CTA SERIES - STEEL & STAINLESS

Weiler Knot Wire Wheels- Cable Twist Wheels - Provide maximum brushing action with minimal flexibility-ideal for demanding cleaning and coating removal applications on relatively smooth surfaces.


WEILER BRUSH - WEILER SMALL DIAMETER WHEELS (COPPER CENTER) - SILICON CARBIDE, CY SERIES

WEILER BRUSH - WEILER SMALL DIAMETER WHEELS (COPPER CENTER) - SILICON CARBIDE, CY SERIES

Weiler Nylox Small Diameter Wheels - Metal Hub - Crimped Round Silicon Carbide Filament


WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - DOUBLE ROW - BANDED - EXTRA HEAVY DUTY, DR SERIES - STEEL

WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - DOUBLE ROW - BANDED - EXTRA HEAVY DUTY, DR SERIES - STEEL

Weiler Knot Wire Cup Brush - The banded design on the double row knot brush provides maximum aggression.


WEILER BRUSH - WEILER STRINGER BEAD TWIST WHEELS - VERY NARROW FACE, STB, STBA & STC SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER STRINGER BEAD TWIST WHEELS - VERY NARROW FACE, STB, STBA & STC SERIES - STEEL & STAINLESS

Weiler Stringer Bead Wheels

Weiler Stringer Bead Twist Wheels for hard-to-reach areas; primarily for weld cleaning. Weiler utilizes the highest quality wire available. Weiler's Roughneck and Dually stringer bead wheels have been engineered to maximize efficiency and minimize costs. They are the preferred choice of welders' helpers on the pipeline. These premium weld cleaning brushes excel at quickly and thoroughly removing slag, splatter and oxidation without damaging the filler material.



WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - DOUBLE ROW - HEAVY-DUTY, DR & DRF SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - DOUBLE ROW - HEAVY-DUTY, DR & DRF SERIES - STEEL & STAINLESS

Weiler Knot Wire Cup Brush - For aggressive action in severe applications.


WEILER BRUSH - WEILER DOUBLE STEM, DOUBLE SPIRAL, DS SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER DOUBLE STEM, DOUBLE SPIRAL, DS SERIES - STEEL, STAINLESS & BRASS

Weiler double stem double spiral wire brush - Use with power tools for heavy-duty cleaning and deburring.


WEILER BRUSH - WEILER BURRITE TYPE HOLDERS - 1/4" STEM DIAMETER, BRH SERIES

WEILER BRUSH - WEILER BURRITE TYPE HOLDERS - 1/4" STEM DIAMETER, BRH SERIES

Weiler Burrite type Holder enables reverse rotation of brush.


WEILER BRUSH - WEILER BURRITE TYPE - FLAT SIDE ACTION, BR SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER BURRITE TYPE - FLAT SIDE ACTION, BR SERIES - STEEL & STAINLESS

Weiler Burrite Type flat action - Use with a holder on blind, threaded holes.


WEILER BRUSH - WEILER CIRCULAR FLARED END BRUSHES, EBC SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER CIRCULAR FLARED END BRUSHES, EBC SERIES - STEEL & STAINLESS

Weiler Circular Flared End Brushes - Accommodate the natural working angle; for broad range of surfaces and contours.


WEILER BRUSH - WEILER PILOT BONDING BRUSHES, EP SERIES - STAINLESS

WEILER BRUSH - WEILER PILOT BONDING BRUSHES, EP SERIES - STAINLESS

Weiler Pilot Bonding Brush - 3/8" Trim Length - For rivet-hole cleaning operations in aircraft and aerospace industries.


WEILER BRUSH - WEILER DRIVE ARBORS - Threaded Shaft

WEILER BRUSH - WEILER DRIVE ARBORS - Threaded Shaft



WEILER BRUSH - WEILER MIGHTY-MITE ADAPTERS

WEILER BRUSH - WEILER MIGHTY-MITE ADAPTERS

For cup or wheel brushes.


WEILER BRUSH - WEILER STANDARD TWIST WHEELS - EXTRA HEAVY-DUTY, KHD SERIES - STEEL

WEILER BRUSH - WEILER STANDARD TWIST WHEELS - EXTRA HEAVY-DUTY, KHD SERIES - STEEL

Weiler Standard Twist Wheels - Constructed for superior performance and high aggression in demanding applications. For automatic and semi-automatic equipment. Ideal for gear deburring.


WEILER BRUSH - WEILER SMALL RIGHT ANGLE GRINDER BRUSH KIT

WEILER BRUSH - WEILER SMALL RIGHT ANGLE GRINDER BRUSH KIT



WEILER BRUSH - WEILER WHEEL BRUSHES - WIRE FILL, MW SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER WHEEL BRUSHES - WIRE FILL, MW SERIES - STEEL, STAINLESS & BRASS

Weiler Wire Fill Wheel Brushes - For light cleaning and deburring.


WEILER BRUSH - WEILER NYLON WHEELS, NWA SERIES

WEILER BRUSH - WEILER NYLON WHEELS, NWA SERIES

Weiler Nylon Wheels - Nylon is resistant to most chemicals and displays excellent bend recovery.


WEILER BRUSH - WEILER CRIMPED FILAMENT BASIC SECTIONS - SILICON CARBIDE, NY SERIES

WEILER BRUSH - WEILER CRIMPED FILAMENT BASIC SECTIONS - SILICON CARBIDE, NY SERIES

Weiler Nylox Metal Hub - Crimped Filament - Round Silicon Carbide Filament.
Weiler offers abrasive nylon wheels featuring traditional metal hub construction for light duty debarring and finishing in non-production applications.


WEILER BRUSH - WEILER CRIMPED FILAMENT WHEELS, NYX SERIES

WEILER BRUSH - WEILER CRIMPED FILAMENT WHEELS, NYX SERIES

Weiler Nylox Wheel Brushes-Crimped Filament Wheels-Composite Metal Hub-Round Silicon Carbide Filament. Used to maximize brush conformability on irregular part shapes.


WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS - MEDIUM FACE, OM SERIES - STEEL

WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS - MEDIUM FACE, OM SERIES - STEEL

Weiler Bench Grinder Wire Wheels. A lower price, commercial grade brush for general purpose applications.


WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS - WIDE FACE, OW SERIES - STEELWEILER BRUSH -

WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS - WIDE FACE, OW SERIES - STEELWEILER BRUSH -

Weiler Bench Grinder Wire Wheel - wide. A lower price, commercial grade brush for general purpose applications.


WEILER BRUSH - WEILER PRESSBOARD ADAPTERS

WEILER BRUSH - WEILER PRESSBOARD ADAPTERS

Used for centering 10", 12" and 14" Nylox Wheels when gang mounting.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED SMALL DIAMETER WHEELS, PC SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED SMALL DIAMETER WHEELS, PC SERIES - STEEL

Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CONFLEX BRUSHES, PCFX SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CONFLEX BRUSHES, PCFX SERIES - STEEL

Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CUP BRUSHES, PCR, PCRA & PRCR SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CUP BRUSHES, PCR, PCRA & PRCR SERIES - STEEL

Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Black Elastomer* - Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED TUBE BRUSHES, PDS SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED TUBE BRUSHES, PDS SERIES - STEEL

Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER PENCIL END BRUSHES, PE SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER PENCIL END BRUSHES, PE SERIES - STEEL & STAINLESS

Light-duty brushes for cleaning in small holes and confined areas.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED FLARED END BRUSHES, PEBC SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED FLARED END BRUSHES, PEBC SERIES - STEEL & STAINLESS

Weiler Polyflex Encapsulated Flared End Brush - Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED END BRUSHES - HOLLOW CENTER, PEBH SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED END BRUSHES - HOLLOW CENTER, PEBH SERIES - STEEL & STAINLESS

Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER BLACK GOLD POLYFLEX ENCAPSULATED STRINGER BEAD TWIST WHEELS, PSTB & PSTBA SERIES - STEEL

WEILER BRUSH - WEILER BLACK GOLD POLYFLEX ENCAPSULATED STRINGER BEAD TWIST WHEELS, PSTB & PSTBA SERIES - STEEL

Weiler Black Elastomer* - Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life. For hot pass through cap pass weld cleaning.


WEILER BRUSH - WEILER POLYFLEX EXCAPSULATED CRIMPED WIRE WHEELS - WIDE FACE, PTL SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX EXCAPSULATED CRIMPED WIRE WHEELS - WIDE FACE, PTL SERIES - STEEL

Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CRIMPED WIRE WHEELS - NARROW FACE, PTLN SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CRIMPED WIRE WHEELS - NARROW FACE, PTLN SERIES - STEEL

Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maxiumum aggression and long life.


WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CRIMPED WIRE WHEEL - NARROW FACE, PTLNA SERIES - STEEL

WEILER BRUSH - WEILER POLYFLEX ENCAPSULATED CRIMPED WIRE WHEEL - NARROW FACE, PTLNA SERIES - STEEL

Burgundy Elastomer* (Standard). Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.


WEILER BRUSH - WEILER CABLE TWIST WHEELS - JOINT/CRACK CLEANING BRUSHES, QCT & QCTL SERIES - STEEL

WEILER BRUSH - WEILER CABLE TWIST WHEELS - JOINT/CRACK CLEANING BRUSHES, QCT & QCTL SERIES - STEEL

Weiler Knot Wire Wheels with Arbor Hole - featuring heavy duty construction and an extra long trim length. For brushing joints or cleaning cracks in concrete and asphalt; preparing expansion joints for filing and sealing. Used on walk-behind machines.


WEILER BRUSH - WEILER CUP BRUSHES - SILICON CARBIDE, CR, RCR & UC SERIES

WEILER BRUSH - WEILER CUP BRUSHES - SILICON CARBIDE, CR, RCR & UC SERIES

Weiler Nylox Cup Brushes-crimped round silicon carbide filament feature traditional cup brush construction for deburring and finishing use in lighter duty applications.


WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - 1/2" ROWS, RDR SERIES - STEEL

WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - 1/2" ROWS, RDR SERIES - STEEL

For line traveling machines.


WEILER BRUSH - WEILER ROUND - STAINLESS STEEL STEM, SM SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER ROUND - STAINLESS STEEL STEM, SM SERIES - STEEL, STAINLESS & BRASS

Use fully chucked on smooth or threaded blind holes.


WEILER BRUSH - WEILER SQUARE BRUSHES, SQ SERIES - STEEL

WEILER BRUSH - WEILER SQUARE BRUSHES, SQ SERIES - STEEL

For cleaning hole sides and bottom in a single step.


WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - SINGLE ROW, SR, SRA, SRC SRF & RSR SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER KNOT WIRE CUP BRUSHES - SINGLE ROW, SR, SRA, SRC SRF & RSR SERIES - STEEL & STAINLESS

Weiler Knot Wire Cup Brush - General Duty. For fast, efficient cleaning of large surfaces.


WEILER BRUSH - WEILER STANDARD TWIST WHEELS, ST, STA & STH SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER STANDARD TWIST WHEELS, ST, STA & STH SERIES - STEEL & STAINLESS

Weiler Knot Wire Wheels with Arbor Hole. Intended for use on straight grinders and stationary machines such as bench grinders-pedestal grinders and buffing lathes. These radial brushes are available in heat treated steel - Type 302 stainless steel -bronze wire. Rugged knot-type construction provides aggressive, high-impact action for severe applications.


WEILER BRUSH - WEILER KNOT WIRE WHEELS - STANDARD TWIST, STA SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER KNOT WIRE WHEELS - STANDARD TWIST, STA SERIES - STEEL & STAINLESS

Weiler Knot Wire Wheel - Rugged knot-type construction provides aggressive, high-impact action for severe applications.


WEILER BRUSH - WEILER STANDARD TWIST WHEELS - MOUNTED ON 1/4" STEM, STM SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER STANDARD TWIST WHEELS - MOUNTED ON 1/4" STEM, STM SERIES - STEEL & STAINLESS

Weiler Knot Wire Wheels with Stem. Knot wire wheels with a permanently attached 1/4" stem or shank are primarily intended for use on high speed die grinders. These radial wheels are available in heat treated steel and Type 302 stainless steel wire.


WEILER BRUSH - WEILER SINGLE STEM, SINGLE SPIRAL, STS SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER SINGLE STEM, SINGLE SPIRAL, STS SERIES - STEEL, STAINLESS & BRASS

Eye Handle - Use for manual cleaning applications.


WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - WIDE FACE, TL SERIES - STEEL

WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - WIDE FACE, TL SERIES - STEEL

Weiler Crimped Wire Wheels - Maximum wire density and aggression, covers more surface area in a single pass.


WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - MEDIUM FACE, TLM SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - MEDIUM FACE, TLM SERIES - STEEL & STAINLESS

Weiler Crimped Wire Wheels - Greater fill density and more aggressive brushing action. Can be mounted in multiples.


WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - NARROW FACE, TLN SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - NARROW FACE, TLN SERIES - STEEL, STAINLESS & BRASS (NON-SPARKING)

Flexible brushing action. Can be mounted in multiples.


WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - NARROW FACE, TLNA SERIES - STEEL & STAINLESS

WEILER BRUSH - WEILER CRIMPED WIRE WHEELS - NARROW FACE, TLNA SERIES - STEEL & STAINLESS

Flexible brushing action.


WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS, TLNS SERIES - STEEL

WEILER BRUSH - WEILER BENCH GRINDER WIRE WHEELS, TLNS SERIES - STEEL

Weiler Bench Grinder Wire Wheel - Steel. General purpose brushes for use on grinding equipment requiring a narrow face width.


WEILER BRUSH - WEILER TUBE BRUSHES (MICRO ABRASIVE), TW SERIES

WEILER BRUSH - WEILER TUBE BRUSHES (MICRO ABRASIVE), TW SERIES

Silicate filament for ultra-fine deburring and cleaning of small internal holes.


WEILER BRUSH - WEILER TAMPICO WHEELS, TWA SERIES

WEILER BRUSH - WEILER TAMPICO WHEELS, TWA SERIES

Weiler Tampico wheel brushes filled with non-metallic filaments are primarily intended for light-duty cleaning and scrubbing applications as well as scratch-free finishing and polishing. Tampico wheels feature a durable vegetable fiber fill material that is chemical and heat resistant and also holds abrasive compounds well and can be used for buffing-deburring-edge blending and polishing applications.


WEILER BRUSH - WEILER CRIMPED WIRE CUP BRUSHES, UC SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER CRIMPED WIRE CUP BRUSHES, UC SERIES - STEEL, STAINLESS & BRASS

For general purpose applications on large surface areas.


WEILER BRUSH - WEILER VALVE GUIDE BRUSHES, VG & VGN SERIES

WEILER BRUSH - WEILER VALVE GUIDE BRUSHES, VG & VGN SERIES

Weiler Valve Guide Brushes - Single Stem, Single Spiral, with Handle


WEILER BRUSH - WEILER CABLE TWIST WHEELS - WIDE FACE, WCT SERIES - STEEL

WEILER BRUSH - WEILER CABLE TWIST WHEELS - WIDE FACE, WCT SERIES - STEEL

Weiler Knot Wire Wheels- Cable Twist Wheel - Four Section. Featuring four rows of tightly knotted wire-for use in automated applications such as cleaning the OD of drill pipe and other oilfield tubular goods. For automatic and semi-automatic equipment.


WEILER BRUSH - WEILER PLATER

WEILER BRUSH - WEILER PLATER'S BRASS WIRE WHEELS, WSB SERIES - BRASS

Weiler Platers Brass Wire Wheels - Ideal for producing antique or fine satin finishes on precious and non-ferrous metals.


WEILER BRUSH - WEILER STANDARD TWIST WHEELS - WIDE FACE - TWO SECTIONS, WST SERIES - STEEL

WEILER BRUSH - WEILER STANDARD TWIST WHEELS - WIDE FACE - TWO SECTIONS, WST SERIES - STEEL

Weiler Knot Wire Wheels-Standard Twist Wheels. Provide heavy duty brushing action with some flexibility. Feature a double row of wire for a wider brush face. Covers more surface area in a single pass


WEILER BRUSH - WEILER SABER TOOTH CERAMIC FLAP DISCS

WEILER BRUSH - WEILER SABER TOOTH CERAMIC FLAP DISCS

Weiler Saber Tooth Ceramic Flap Discs

Weiler Saber Tooth Ceramic Flap Discs provide cool fast cutting action on Aluminum-Stainless Steel and other hard to grind metals resulting in lower grinding and finishing costs. Made in the USA.



WEILER BRUSH - WEILER WITH BURR-RX RADIAL WHEEL BRUSHES

WEILER BRUSH - WEILER WITH BURR-RX RADIAL WHEEL BRUSHES

Weiler Nylox Wheel Brushes-Burr-Rx Crimped Filament Wheels-Composite Metal Hub-Crimped Round Black Ceramic Filament. Weiler's Nylox abrasive nylon wheel brushes featuring composite metal hub and composite hub construction are manufactured using a molded polymer material to retain the filaments. Burr-Rx wheels feature Weiler's advanced black ceramic grain filament which delivers up to a 400% greater edge cutting action in comparison to traditional silicon carbide and aluminum oxide filaments for the fastest and most aggressive deburring action to minimize cycle times and maximize media life.


WEILER BRUSH - WEILER PLASTIC ADAPTERS

WEILER BRUSH - WEILER PLASTIC ADAPTERS



WEILER BRUSH - WEILER METAL ADAPTERS

WEILER BRUSH - WEILER METAL ADAPTERS

For 6" & 8" Brushes. Used in pairs & priced per pair.


WEILER BRUSH - WEILER STANDARD TWIST WHEELS - WIRE DESCALING BRUSHES - FOUR SECTIONS, WST SERIES - STEEL

WEILER BRUSH - WEILER STANDARD TWIST WHEELS - WIRE DESCALING BRUSHES - FOUR SECTIONS, WST SERIES - STEEL

Used on descaling equipment.


WEILER BRUSH - WEILER CUP BRUSHES - WIRE FILL, MC SERIES - STEEL, STAINLESS & BRASS

WEILER BRUSH - WEILER CUP BRUSHES - WIRE FILL, MC SERIES - STEEL, STAINLESS & BRASS

Weiler Cup Brushes - Ideal for light cleaning on relatively large areas.


WEILER BRUSH - WEILER CUP BRUSHES - BRISTLE FILL, MC SERIES

WEILER BRUSH - WEILER CUP BRUSHES - BRISTLE FILL, MC SERIES

Weiler Cup Brushes for polishing relatively large areas with abrasive or buffing compounds.


WEILER BRUSH - WEILER NYLON TUBE BRUSHES, NN SERIES

WEILER BRUSH - WEILER NYLON TUBE BRUSHES, NN SERIES

Loop Handle, Straight Black Nylon Fill


WEILER BRUSH - WEILER PERCOLATOR BRUSHES, LU SERIES

WEILER BRUSH - WEILER PERCOLATOR BRUSHES, LU SERIES

Straight White Nylon Fill


WEILER BRUSH - WEILER RECTANGULAR FILAMENT WHEELS (.045 x .090) - SILICON CARBIDE, NYS SERIES

WEILER BRUSH - WEILER RECTANGULAR FILAMENT WHEELS (.045 x .090) - SILICON CARBIDE, NYS SERIES

Used to maximize deburring action and minimize cycle time.


WEILER BRUSH - WEILER STRAIGHT FILAMENT WHEEL - SILICON CARBIDE, NYX SERIES

WEILER BRUSH - WEILER STRAIGHT FILAMENT WHEEL - SILICON CARBIDE, NYX SERIES



WEILER BRUSH - WEILER NARROW FACE WHEELS - SILICON CARBIDE, TLN SERIES

WEILER BRUSH - WEILER NARROW FACE WHEELS - SILICON CARBIDE, TLN SERIES

Nylox Wheel Brushes-Narrow Face Wheels-Metal Hub-Crimped Round Silicon Carbide Filament.



WEILER BRUSH - WEILER NARROW FACE WHEELS - HEAVY-DUTY - SILICON CARBIDE, TLN SERIES

WEILER BRUSH - WEILER NARROW FACE WHEELS - HEAVY-DUTY - SILICON CARBIDE, TLN SERIES

Weiler Nylox Wheel Brushes-Heavy Duty Narrow Face Wheels-Metal Hub-Crimped Round Silicon Carbide Filament.



WEILER BRUSH - WEILER LUBRICUT

WEILER BRUSH - WEILER LUBRICUT

Prevents smearing. Improves the finish. Lowers costs.
Lubricut is a lubricant that can be used with Nylox wheels operating above the recommended surface speed. Directing a light spray of Lubricut into the face of the wheel permits the wheel to be operated a higher surface speeds without smearing while improving the finish.


WEILER BRUSH - WEILER CRIMPED FILAMENT DISCS - SILICON CARBIDE - COMPOSITE HUB

WEILER BRUSH - WEILER CRIMPED FILAMENT DISCS - SILICON CARBIDE - COMPOSITE HUB

Weiler Nylox Disc Brushes-Composite Hub Disc Brushes-Silicon Carbide Filament.


WEILER BRUSH - WEILER CRIMPED FILAMENT MINIATURE DISCS - SILICON CARBIDE

WEILER BRUSH - WEILER CRIMPED FILAMENT MINIATURE DISCS - SILICON CARBIDE

Weiler Nylox Mini-Disc Brushes with Silicon Carbide filament feature a precision machined aluminum cup.


WEILER BRUSH - WEILER RECTANGULAR FILAMENT DISCS (.045 X .090) - SILICON CARBIDE - COMPOSITE HUB

WEILER BRUSH - WEILER RECTANGULAR FILAMENT DISCS (.045 X .090) - SILICON CARBIDE - COMPOSITE HUB

Nylox Disc Brushes-Composite Hub-Rectangular Silicon Carbide Filament


WEILER BRUSH - WEILER RECTANGULAR FILAMENT MINIATURE DISC BRUSH - SILICON CARBIDE

WEILER BRUSH - WEILER RECTANGULAR FILAMENT MINIATURE DISC BRUSH - SILICON CARBIDE

Nylox Mini Disc Brushes-Rectangular Silicon Carbide Filament.


WEILER BRUSH - WEILER BURR-RX DISC BRUSHES

WEILER BRUSH - WEILER BURR-RX DISC BRUSHES

Weiler Nylox Disc Brushes - Burr-RX disc brush


WEILER BRUSH - WEILER BURR-RX DISC BRUSHES - NO DRIVE ARBOR REQUIRED

WEILER BRUSH - WEILER BURR-RX DISC BRUSHES - NO DRIVE ARBOR REQUIRED

Weiler Nylox Disc Brushes are manufactured using a tufted configuration and longer trim length for increased aggression and greater conformability in comparison with monofilament disc brushes. Burr-Rx disc brushes feature Weiler's advanced black ceramic grain filament which delivers up to a 400% greater edge cutting action in comparison to traditional silicon carbide and aluminum oxide filaments.
Nylox End Brushes and Miniature End Brushes feature an integral stem for convenient mounting into a toolholder or collet. Nylox End Brushes and Miniature End Brushes are suitable for addressing recesses and internal features.


WEILER BRUSH - WEILER FLOW-THROUGH DISC BRUSH DRIVE ARBORS

WEILER BRUSH - WEILER FLOW-THROUGH DISC BRUSH DRIVE ARBORS

Standard 3/4" Diameter Shaft, 2" Long


WEILER BRUSH - WEILER TUBE BRUSHES - SILICON CARBIDE - DOUBLE STEM, SINGLE SPIRAL, DS SERIES

WEILER BRUSH - WEILER TUBE BRUSHES - SILICON CARBIDE - DOUBLE STEM, SINGLE SPIRAL, DS SERIES



WEILER BRUSH - WEILER MINIATURE & BURR-RX DISC BRUSH DRIVE ARBORS

WEILER BRUSH - WEILER MINIATURE & BURR-RX DISC BRUSH DRIVE ARBORS

Includes drive arbor, set screw and hex key.


WEILER BRUSH - WEILER STEEL FLANGES (REUSABLE)

WEILER BRUSH - WEILER STEEL FLANGES (REUSABLE)

Used on the ends of a gang mount. Used in pairs and priced per pair.


WEILER BRUSH - WEILER DISC BRUSH DRIVE ARBORS

WEILER BRUSH - WEILER DISC BRUSH DRIVE ARBORS

Weiler disc brushes mount to any type of milling machine or CNC machine.


WEILER BRUSH - WEILER TIGER DISC - ANGLED STYLE (TYPE 29)

WEILER BRUSH - WEILER TIGER DISC - ANGLED STYLE (TYPE 29)

Weiler Tiger Disc

Weiler Tiger Disc - Angled Disc - Type 29 for maximum aggression while grinding and long life.



WEILER BRUSH - WEILER TIGER DISC - FLAT STYLE (TYPE 27)

WEILER BRUSH - WEILER TIGER DISC - FLAT STYLE (TYPE 27)

Weiler Tiger Disc

Weiler Tiger Disc - Flat style-Type 27 grinding disc for smooth grinding action and long life.



WEILER BRUSH - WEILER ADAPTING NUTS & SPANNER WRENCH

WEILER BRUSH - WEILER ADAPTING NUTS & SPANNER WRENCH

For use with Tiger, Vortec Pro and High Density Flap Discs.


WEILER BRUSH - WEILER VORTEC PRO FLAP DISCS - ANGLED STYLE (TYPE 29)

WEILER BRUSH - WEILER VORTEC PRO FLAP DISCS - ANGLED STYLE (TYPE 29)

Weiler Vortec Pro Flat style Type 29 Flap disc - High cut rate at a value price. Made in USA


WEILER BRUSH - WEILER BIG CAT - HIGH DENSITY FLAT STYLE (TYPE 27)

WEILER BRUSH - WEILER BIG CAT - HIGH DENSITY FLAT STYLE (TYPE 27)

Weiler Big Cat High Density Flat Type 27 disc for Increased conformability and maximum life.


WEILER BRUSH - WEILER TIGER DISCS FOR STAINLESS STEEL - HIGH DENSITY FLAT STYLE (TYPE 27)

WEILER BRUSH - WEILER TIGER DISCS FOR STAINLESS STEEL - HIGH DENSITY FLAT STYLE (TYPE 27)

60 Grit: For maximum cut rate
80 Grit: For superior finish


WEILER BRUSH - WEILER BOBCAT MINI DISCS

WEILER BRUSH - WEILER BOBCAT MINI DISCS

Weiler BobCat mini discs are designed for use on right angle die grinders. These mini flap disks provide smooth grinding in tight areas. Zirconium Grain - Plastic Backing for use grinding-deburring and blending on steel, stainless steel and other metals. Made in the USA.


WEILER BRUSH - WEILER BOBCAT DRIVE MANDREL

WEILER BRUSH - WEILER BOBCAT DRIVE MANDREL

Weiler Bobcat Drive Mandrel - For mounting 2" & 3" BobCats on tools with 1/4" collets


WEILER BRUSH - WEILER VORTEC PRO - DISPLAY PACKAGED - ANGLED STYLE (TYPE 29)

WEILER BRUSH - WEILER VORTEC PRO - DISPLAY PACKAGED - ANGLED STYLE (TYPE 29)

Weiler Vortec Pro - Display packaged Flap Discs-Angle Style-Type 29. Convenient hang-card makes increasing point-of-purchase sales easy!


WEILER BRUSH - WEILER RESIN FIBER DISCS

WEILER BRUSH - WEILER RESIN FIBER DISCS

Weiler Resin Fiber Sanding Discs

Weiler resin fiber backed-coated abrasive sanding discs are for use on right angle grinders. Weiler's line of premium resin fiber discs are suitable for light grinding-blending-surface preparation and finishing.



WEILER BRUSH - WEILER ACCESSORIES FOR RESIN FIBER & AL-TRA CUT DISCS

WEILER BRUSH - WEILER ACCESSORIES FOR RESIN FIBER & AL-TRA CUT DISCS



WEILER BRUSH - WEILER 2" & 3" AL-TRA CUT DISCS - ALUMINUM OXIDE

WEILER BRUSH - WEILER 2" & 3" AL-TRA CUT DISCS - ALUMINUM OXIDE

Weiler AL-tra CUT Discs are specially formulated for superior grinding performance on aluminum. These revolutionary disks resist loading-ensure high cut rates-prolong disc life and achieve a superior finish compared to conventional sanding/grinding discs. Aluminum Oxide.


WEILER BRUSH - WEILER 4-1/2" & 7" AL-TRA CUT DISCS - ALUMINUM OXIDE

WEILER BRUSH - WEILER 4-1/2" & 7" AL-TRA CUT DISCS - ALUMINUM OXIDE

Weiler AL-tra CUT Discs are specially formulated for superior grinding performance on aluminum. These revolutionary disks resist loading-ensure high cut rates-prolong disc life and achieve a superior finish compared to conventional sanding discs and grinding discs. Aluminum Oxide.


WEILER BRUSH - WEILER BLENDING DISCS - METAL HUB STYLE

WEILER BRUSH - WEILER BLENDING DISCS - METAL HUB STYLE

Weiler Blending Discs are Compatible with Norton Speed-Lok TS back-up pads.


WEILER BRUSH - WEILER METAL HUB STYLE BACK-UP PADS - 1/4" STEM

WEILER BRUSH - WEILER METAL HUB STYLE BACK-UP PADS - 1/4" STEM



WEILER BRUSH - WEILER BLENDING DISCS - PLASTIC BUTTON STYLE

WEILER BRUSH - WEILER BLENDING DISCS - PLASTIC BUTTON STYLE

Weiler Blending Discs - Compatible with 3M Roloc back-up pads.


WEILER BRUSH - WEILER TRIM-KUT DISCS - ALUMINUM OXIDE

WEILER BRUSH - WEILER TRIM-KUT DISCS - ALUMINUM OXIDE

Weiler Trim-Kuts are abrasive discs designed for light grinding and blending applications and deburring. The abrasive grains are fused directly into a wearable polymer backing resulting in a disc that requires no back-up pad. 3" disks are designed for use on right angle air die grinders. 4-1/2" discs are for use on right angle grinders.


WEILER BRUSH - WEILER TRIM-KUT ADAPTERS

WEILER BRUSH - WEILER TRIM-KUT ADAPTERS

Weiler Trim-Kut Adapters


WEILER BRUSH - WEILER TIGER MOUNTED FLAP WHEELS - 1/4" STEM - ALUMINUM OXIDE

WEILER BRUSH - WEILER TIGER MOUNTED FLAP WHEELS - 1/4" STEM - ALUMINUM OXIDE

A premium line designed to provide long life. Ideal for medium to high production environments.


WEILER BRUSH - WEILER TIGER MOUNTED FLAP WHEELS - 1/4"-20 THREADED STEM - ALUMINUM OXIDE

WEILER BRUSH - WEILER TIGER MOUNTED FLAP WHEELS - 1/4"-20 THREADED STEM - ALUMINUM OXIDE



WEILER BRUSH - WEILER DRIVE ARBOR - FOR 1/4"-20 MOUNTED FLAP WHEELS

WEILER BRUSH - WEILER DRIVE ARBOR - FOR 1/4"-20 MOUNTED FLAP WHEELS



WEILER BRUSH - WEILER VORTEC MOUNTED FLAP WHEELS - 1/4" STEM - ALUMINUM OXIDE

WEILER BRUSH - WEILER VORTEC MOUNTED FLAP WHEELS - 1/4" STEM - ALUMINUM OXIDE

Weiler Vortec Mounted Flap Wheels - A product line designed to provide fast cutting action. Ideal for low to medium production environments.


WEILER BRUSH - WEILER TIGER UNMOUNTED FLAP WHEELS - ALUMINUM OXIDE

WEILER BRUSH - WEILER TIGER UNMOUNTED FLAP WHEELS - ALUMINUM OXIDE

Coated Abrasive Flap Wheels - Tiger Unmounted Flap Wheels - Aluminum Oxide.


WEILER BRUSH - WEILER METAL ADAPTERS - FOR UNMOUNTED FLAP WHEELS

WEILER BRUSH - WEILER METAL ADAPTERS - FOR UNMOUNTED FLAP WHEELS

Used in pairs and priced per pair.


WEILER BRUSH - WEILER PORTABLE FILE BELTS

WEILER BRUSH - WEILER PORTABLE FILE BELTS

Coated Abrasive Portable File Belts enhance productivity and lower operating costs with a wide assortment of coated abrasive belts in sizes ranging from 1/4" x 18" to 6" x 132".


WEILER BRUSH - WEILER PORTABLE BELTS

WEILER BRUSH - WEILER PORTABLE BELTS

Coated abrasive portable belts.


WEILER BRUSH - WEILER BENCHSTAND/BACKSTAND BELTS

WEILER BRUSH - WEILER BENCHSTAND/BACKSTAND BELTS

Weiler Benchstand Belts and Backstand Belts can be used for decorative finishing of decorative surfaces - edge blending - smoothing metal-plastic-wood - removing tool marks


WEILER BRUSH - WEILER SHOP ROLLS - ALUMINUM OXIDE - 50 YARDS

WEILER BRUSH - WEILER SHOP ROLLS - ALUMINUM OXIDE - 50 YARDS

Weiler's Shop Rolls are resin over resin bonded - providing a stronger heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher durable backing for a longer life. Aluminum Oxide - 50 yards - One roll per box.


WEILER BRUSH - WEILER TYPE 27 GRINDING WHEELS

WEILER BRUSH - WEILER TYPE 27 GRINDING WHEELS

Weiler Type 27 grinding wheels - For rough grinding applications on various metals.


WEILER BRUSH - WEILER TYPE 27 CUTTING AND LIGHT GRINDING WHEELS

WEILER BRUSH - WEILER TYPE 27 CUTTING AND LIGHT GRINDING WHEELS

Weiler Type 27 Cutting Wheels - For root pass grinding, light grinding and cutting.


WEILER BRUSH - WEILER TYPE 27 THIN CUTTING WHEELS

WEILER BRUSH - WEILER TYPE 27 THIN CUTTING WHEELS

Weiler Type 27 thin cutting wheels - For fast, burr-free cutting of various metals.


WEILER BRUSH - WEILER TYPE 27 CUTTING WHEELS

WEILER BRUSH - WEILER TYPE 27 CUTTING WHEELS

Weiler Type 27 cutting wheels - For a wide range of metal-cutting applications.


WEILER BRUSH - WEILER SMALL TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER SMALL TYPE 1 REINFORCED WHEELS

For electric or air die grinders and angle grinders.


WEILER BRUSH - WEILER TYPE 1 PORTABLE SNAGGING WHEELS

WEILER BRUSH - WEILER TYPE 1 PORTABLE SNAGGING WHEELS

Vortec Pro Small Type 1 Reinforced Cut-Off Wheels for electric or air die grinders.


WEILER BRUSH - WEILER MOUNTING MANDRELS - 1/4" STEM

WEILER BRUSH - WEILER MOUNTING MANDRELS - 1/4" STEM

For 1"-3" Type 1 Wheels only


WEILER BRUSH - WEILER TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER TYPE 1 REINFORCED WHEELS

Bonded abrasive Type 1 reinforced cut-off wheels for toolroom and machine shop use.


WEILER BRUSH - WEILER TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER TYPE 1 REINFORCED WHEELS

Weiler Vortec Pro Type 1 Reinforced Cut Off Wheels for circular saws


WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

Weiler Large Type 1 Reinforced Cut-Off Wheels for stationary machines.


WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

Weiler Large Type 1 Reinforced cut-off wheels for portable gas or electric saws.


WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

WEILER BRUSH - WEILER LARGE TYPE 1 REINFORCED WHEELS

Reinforced Cut-Off Wheels for low horsepower chop saws.


WEILER BRUSH - WEILER UNITIZED WHEELS

WEILER BRUSH - WEILER UNITIZED WHEELS

Weiler Unitized wheels are designed for use on die grinders and are ideal for a variety of cleaning-finishing-deburring and edge blending applications.

Series 2 - Cleaning & Finishing - Hardness: Soft
Series 3 - General Purpose - Hardness: Medium
Series 6 - Deburring - Hardness: Medium/Hard
Series 8 - HD Deburring & Polishing - Hardness: Hard (Heavy-Duty)


WEILER BRUSH - WEILER MANDRELS

WEILER BRUSH - WEILER MANDRELS

For Unitized Wheels


WEILER BRUSH - WEILER CONVOLUTE WHEELS

WEILER BRUSH - WEILER CONVOLUTE WHEELS

Weiler Convolute Wheels

MRO/General Purpose - For general cleaning and finishing
Deburring Wheels - For deburring and edge blending


WEILER BRUSH - WEILER ADAPTERS

WEILER BRUSH - WEILER ADAPTERS

For Convolute Wheels


WEILER BRUSH - WEILER PLASTIC BUTTON STYLE DISCS

WEILER BRUSH - WEILER PLASTIC BUTTON STYLE DISCS

Compatible with 3M Roloc back-up pads.


WEILER BRUSH - WEILER PLASTIC BUTTON STYLE BACK-UP PADS - 1/4" STEM

WEILER BRUSH - WEILER PLASTIC BUTTON STYLE BACK-UP PADS - 1/4" STEM



WEILER BRUSH - WEILER HOOK & LOOP STYLE DISCS

WEILER BRUSH - WEILER HOOK & LOOP STYLE DISCS



WEILER BRUSH - WEILER HOOK & LOOP STYLE BACK-UP PADS

WEILER BRUSH - WEILER HOOK & LOOP STYLE BACK-UP PADS



WEILER BRUSH - WEILER HAND PADS

WEILER BRUSH - WEILER HAND PADS

Weiler 6 x 9 hand pads are for cleaning and conditioning surfaces by hand. Hand pads can be used in wet applications - for producing satin finishes on aluminum and stainless steel- for light deburring - for blending light scratches.


WEILER BRUSH - WEILER HAND PAD HOLDER



WEILER BRUSH - WEILER STEM-MOUNTED INTERLEAF FLAP WHEELS

WEILER BRUSH - WEILER STEM-MOUNTED INTERLEAF FLAP WHEELS

Weiler's Non-Woven Interleaf Flap Wheels provide a combination of non-woven and coated abrasive material to produce a very conformable product compared to a standard coated abrasive flap wheel. They are designed to be a finishing and surface blending tool. They are ideal for producing satin or decorative finishes on irregular or contoured surfaces. Aluminum Oxide


WEILER BRUSH - WEILER CONTRACTOR BROOMS

WEILER BRUSH - WEILER CONTRACTOR BROOMS

Hardwood Block
Heavy-duty brace included with all brooms.


WEILER BRUSH - WEILER PERMA-SWEEP FLOOR BRUSHES

WEILER BRUSH - WEILER PERMA-SWEEP FLOOR BRUSHES

Synthetic Foam Block


WEILER BRUSH - WEILER STELLAR FLOOR BRUSHES

WEILER BRUSH - WEILER STELLAR FLOOR BRUSHES

Synthetic Foam Block


WEILER BRUSH - WEILER FINE SWEEPS

WEILER BRUSH - WEILER FINE SWEEPS

Weiler Fine Sweeps - lacquered Hardwood Block


WEILER BRUSH - WEILER ECONOMY FINE SWEEPS

WEILER BRUSH - WEILER ECONOMY FINE SWEEPS

Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER MEDIUM SWEEPS

WEILER BRUSH - WEILER MEDIUM SWEEPS

Lacquered Hardwood Block


WEILER BRUSH - WEILER ECONOMY MEDIUM SWEEPS

WEILER BRUSH - WEILER ECONOMY MEDIUM SWEEPS

Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER COARSE SWEEPING

WEILER BRUSH - WEILER COARSE SWEEPING

Lacquered Hardwood Block


WEILER BRUSH - WEILER ECONOMY STRIP BROOMS

WEILER BRUSH - WEILER ECONOMY STRIP BROOMS

Economy brushed provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER PALMYRA FILL GARAGE BRUSHES

WEILER BRUSH - WEILER PALMYRA FILL GARAGE BRUSHES

Lacquered Hardwood Block


WEILER BRUSH - WEILER POLYPROPYLENE FILL GARAGE BRUSHES

WEILER BRUSH - WEILER POLYPROPYLENE FILL GARAGE BRUSHES

Lacquered Hardwood Block


WEILER BRUSH - WEILER MAROON POLPROPYLENE FILL GARAGE BRUSHES

WEILER BRUSH - WEILER MAROON POLPROPYLENE FILL GARAGE BRUSHES

Lacquered Hardwood Block


WEILER BRUSH - WEILER ECONOMY GARAGE BRUSHES

WEILER BRUSH - WEILER ECONOMY GARAGE BRUSHES

Lacquered Hardwood Block
Economy brushed provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER DRIVEWAY COATERS

WEILER BRUSH - WEILER DRIVEWAY COATERS

Weiler driveway coaters - For applying blacktop driveway and parking lot dressings, asphalt, sealers or roof coatings.


WEILER BRUSH - WEILER STREET BROOMS

WEILER BRUSH - WEILER STREET BROOMS

Hardwood Block
Wide flared ends for sweeping close to curbs and walls.



WEILER BRUSH - WEILER WIRE BROOMS

WEILER BRUSH - WEILER WIRE BROOMS

Weiler Wire Brooms - Hardwood Block
For sweeping or scrubbing concrete or stone floors, driveways, etc. Ideal for sweeping heavy chips and debris.


WEILER BRUSH - WEILER WOOD HANDLES

WEILER BRUSH - WEILER WOOD HANDLES

Weiler Brush - Quality hardwood handles with clear lacquer finish.


WEILER BRUSH - WEILER METAL HANDLES

WEILER BRUSH - WEILER METAL HANDLES

Reinforced, heavy-duty metal handles are available in two colors and optional foam cover.


WEILER BRUSH - WEILER TELESCOPING AND FOUNTAIN TUBE HANDLES

WEILER BRUSH - WEILER TELESCOPING AND FOUNTAIN TUBE HANDLES

Use telescoping handles to shorten or extend the reach of the handle. Use fountain tube handles when a continuous flow of water is needed, i.e. car/truck washing.


WEILER BRUSH - WEILER FIBERGLASS HANDLES

WEILER BRUSH - WEILER FIBERGLASS HANDLES

Weiler Fiberglass Handles
Featuring the honeycomb core.
Fiberglass handles are stronger than wood or metal.
Virtually indestructible.


WEILER BRUSH - WEILER HANDLE ACCESSORIES

WEILER BRUSH - WEILER HANDLE ACCESSORIES



WEILER BRUSH - WEILER UPRIGHT BROOMS

WEILER BRUSH - WEILER UPRIGHT BROOMS

Weiler Upright Brooms


WEILER BRUSH - WEILER ANGLE BROOMS

WEILER BRUSH - WEILER ANGLE BROOMS

Angled trim allows access to corners, under low cabinets and other hard-to-reach areas.


WEILER BRUSH - WEILER CAP BROOMS

WEILER BRUSH - WEILER CAP BROOMS

Metal top for added durability. Ideal for wet or dry applications.


WEILER BRUSH - WEILER LOBBY BROOMS

WEILER BRUSH - WEILER LOBBY BROOMS

For light-duty spot sweeping.


WEILER BRUSH - WEILER WHISK BROOMS

WEILER BRUSH - WEILER WHISK BROOMS

Weiler Wisk Brooms - For fast, efficient clean-up.


WEILER BRUSH - WEILER COUNTER DUSTERS

WEILER BRUSH - WEILER COUNTER DUSTERS



WEILER BRUSH - WEILER DUST PANS

WEILER BRUSH - WEILER DUST PANS



WEILER BRUSH - WEILER RADIATOR BRUSHES

WEILER BRUSH - WEILER RADIATOR BRUSHES

24" Overall Length
Ideal for cleaning radiators and narrow, hard-to-reach places.


WEILER BRUSH - WEILER WALL DUSTING BRUSH

WEILER BRUSH - WEILER WALL DUSTING BRUSH

Weiler Dusting Brush - For dusting ceilings, valances, high moldings and other hard-to-reach places. Twisted-in-wire construction with plastic handle.


WEILER BRUSH - WEILER FLOOR SQUEEGEES

WEILER BRUSH - WEILER FLOOR SQUEEGEES

Weiler Floor Squeegee - Heavy-duty construction, iron handle socket.


WEILER BRUSH - WEILER WINDOW SQUEEGEES

WEILER BRUSH - WEILER WINDOW SQUEEGEES

Weiler Window Squeegee - Rust-proof handle socket and frame.


WEILER BRUSH - WEILER WINDOW BRUSHES

WEILER BRUSH - WEILER WINDOW BRUSHES

Weiler Window Brushes - Two tapered handle holes


WEILER BRUSH - WEILER VEHICLE WASH BRUSHES

WEILER BRUSH - WEILER VEHICLE WASH BRUSHES

Weiler Vehicle Wash Brushes - Protective bumper - Foam block with two handle holes.


WEILER BRUSH - WEILER SCHOOL BUS BRUSH

WEILER BRUSH - WEILER SCHOOL BUS BRUSH

Easily sweeps between school bus seats.
Lacquered hardwood block with one threaded handle hole.


WEILER BRUSH - WEILER BI-LEVEL SCRUB BRUSHES

WEILER BRUSH - WEILER BI-LEVEL SCRUB BRUSHES

The bi-level design allows the brush to stay in contact with the surface.


WEILER BRUSH - WEILER UTILITY SCRUB BRUSH

WEILER BRUSH - WEILER UTILITY SCRUB BRUSH

Weiler Utility Scrub Brushes


WEILER BRUSH - WEILER UPHOLSTERY/SPOTTING BRUSH

WEILER BRUSH - WEILER UPHOLSTERY/SPOTTING BRUSH

Weiler Upholstery Spotting Brush - Wet and dry cleaning, prespotting, carpet touch-up, etc.
Shaped plastic handle.


WEILER BRUSH - WEILER SPOKE BRUSHES

WEILER BRUSH - WEILER SPOKE BRUSHES

For use in confined spaces


WEILER BRUSH - WEILER TIRE CLEANING BRUSHES

WEILER BRUSH - WEILER TIRE CLEANING BRUSHES

Foam block


WEILER BRUSH - WEILER HAND SCRUB BRUSHES

WEILER BRUSH - WEILER HAND SCRUB BRUSHES

Heavily filled for heavy-duty scrubbing


WEILER BRUSH - WEILER DECK SCRUB BRUSHES

WEILER BRUSH - WEILER DECK SCRUB BRUSHES

Weiler deck scrub brushes - Excellent for scrubbing decks or floors. One threaded and one tapered handle hole.


WEILER BRUSH - WEILER BASEBOARD BRUSH

WEILER BRUSH - WEILER BASEBOARD BRUSH



WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - WOOD BLOCK

WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - WOOD BLOCK

Weiler Utility Scrub Brush - For general scrubbing in factories, kitchens, institutions, etc.


WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - FOAM BLOCK

WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - FOAM BLOCK

Weiler Utility Scrub Brush - Chemical and water resistant, will not warp or crack.


WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - PLASTIC BLOCK

WEILER BRUSH - WEILER UTILITY SCRUB BRUSHES - PLASTIC BLOCK

Weiler Utility Scrub Brush - Designed for high temperature cleaning, ideal for food service.


WEILER BRUSH - WEILER ECONOMY UTILITY SCRUB BRUSHES

WEILER BRUSH - WEILER ECONOMY UTILITY SCRUB BRUSHES

Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER GROUT DETAIL BRUSH

WEILER BRUSH - WEILER GROUT DETAIL BRUSH

Use for removing stubborn dirt, grime and mildew from tiled surfaces.


WEILER BRUSH - WEILER BOWL BRUSHES

WEILER BRUSH - WEILER BOWL BRUSHES

2" Trim Length


WEILER BRUSH - WEILER PROFESSIONAL BOWL BRUSHES

WEILER BRUSH - WEILER PROFESSIONAL BOWL BRUSHES

Hardwood handle


WEILER BRUSH - WEILER NAIL BRUSHES

WEILER BRUSH - WEILER NAIL BRUSHES



WEILER BRUSH - WEILER BOTTLE WASHING BRUSHES

WEILER BRUSH - WEILER BOTTLE WASHING BRUSHES



WEILER BRUSH - WEILER VAT BRUSH

WEILER BRUSH - WEILER VAT BRUSH

Weiler Vat Brush for valves, outlets, small tanks, beverage dispensers & coffee urns.


WEILER BRUSH - WEILER WET MOP HEADS

WEILER BRUSH - WEILER WET MOP HEADS

Weiler Wet Mop Heads


WEILER BRUSH - WEILER WET MOP HANDLES

WEILER BRUSH - WEILER WET MOP HANDLES

Weiler Industrial Grade
Hardwood handle with plated metal heads


WEILER BRUSH - WEILER PROFESSIONAL DUST MOPS

WEILER BRUSH - WEILER PROFESSIONAL DUST MOPS

Tie-on style, 4-ply cotton


WEILER BRUSH - WEILER PROFESSIONAL DUST MOP FRAMES

WEILER BRUSH - WEILER PROFESSIONAL DUST MOP FRAMES



WEILER BRUSH - WEILER PROFESSIONAL DUST MOP HANDLE

WEILER BRUSH - WEILER PROFESSIONAL DUST MOP HANDLE

Heavy-duty clamp-on style


WEILER BRUSH - WEILER WEDGE-STYLE DUST MOP

WEILER BRUSH - WEILER WEDGE-STYLE DUST MOP

Weiler Dust Mop Tie-on style, 4-ply cotton


WEILER BRUSH - WEILER WEDGE-STYLE FRAME AND HANDLE

WEILER BRUSH - WEILER WEDGE-STYLE FRAME AND HANDLE

Weiler Wedge Style Frame and Handle


WEILER BRUSH - WEILER ONE PIECE COTTON DECK MOPS

WEILER BRUSH - WEILER ONE PIECE COTTON DECK MOPS

Industrial grade
Mop head securely tied to handle.


WEILER BRUSH - WEILER COMBO BUCKET

WEILER BRUSH - WEILER COMBO BUCKET

One piece construction that will not rust, fade, crack, peel, chip, dent or warp. Wringer fits all sizes of plastic or metal buckets.


WEILER BRUSH - WEILER WAX APPLICATORS

WEILER BRUSH - WEILER WAX APPLICATORS

Weiler Wax Applicators
100% lambswool
Washes easily and dries quickly. Pads are easily changed.


WEILER BRUSH - WEILER KNOT-TYPE ROOF BRUSHES

WEILER BRUSH - WEILER KNOT-TYPE ROOF BRUSHES

For application of roof coatings.


WEILER BRUSH - WEILER BLOCK-TYPE ROOF BRUSHES

WEILER BRUSH - WEILER BLOCK-TYPE ROOF BRUSHES

Weiler Block Type Roof Brushes for application of roof coatings.


WEILER BRUSH - WEILER MASONRY BRUSHES

WEILER BRUSH - WEILER MASONRY BRUSHES

Useful tools for applying cement, waterpaints and liquid waterproofing materials on masonry walls. Handle attached.


WEILER BRUSH - WEILER WHITEWASH BRUSHES

WEILER BRUSH - WEILER WHITEWASH BRUSHES

Weiler White Wash Brushes - Two tapered handle holes allow user to choose the correct brush angle needed.


WEILER BRUSH - WEILER ACID BRUSHES

WEILER BRUSH - WEILER ACID BRUSHES

Weiler acid brushes with Detachable handle
For the application of Kalsomine, cold water, acid and water repellents to concrete and othe rough surfaces.


WEILER BRUSH - WEILER ACID SCRUB BRUSH

WEILER BRUSH - WEILER ACID SCRUB BRUSH

Weiler acid scrub brush - Hardwook block. Tapered handle hole.


WEILER BRUSH - WEILER CEMENT FINISHING BRUSHES

WEILER BRUSH - WEILER CEMENT FINISHING BRUSHES

Hardwood block. Ideal for creating texture to newly pured cement and for applying coatings on asphalt or concrete.


WEILER BRUSH - WEILER STIPPLING BRUSH

WEILER BRUSH - WEILER STIPPLING BRUSH

For texturing wall surfaces and ceilings. Lacquered heavy-duty wood block with one threaded handle hole.


WEILER BRUSH - WEILER SMOOTHING BRUSH

WEILER BRUSH - WEILER SMOOTHING BRUSH

Hardwood block. For smoothing wallpaper.


WEILER BRUSH - WEILER CURVED HANDLE SCRATCH BRUSHES

WEILER BRUSH - WEILER CURVED HANDLE SCRATCH BRUSHES

Hardwood blocks


WEILER BRUSH - WEILER ECONOMY CURVED HANDLE SCRATCH BRUSHES

WEILER BRUSH - WEILER ECONOMY CURVED HANDLE SCRATCH BRUSHES

Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER SHOE HANDLE SCRATCH BRUSHES

WEILER BRUSH - WEILER SHOE HANDLE SCRATCH BRUSHES

Hardwood blocks


WEILER BRUSH - WEILER ECONOMY SHOE HANDLE SCRATCH BRUSHES

WEILER BRUSH - WEILER ECONOMY SHOE HANDLE SCRATCH BRUSHES

Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER

WEILER BRUSH - WEILER HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER

.012 Steel Wire


WEILER BRUSH - WEILER ECONOMY HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER

WEILER BRUSH - WEILER ECONOMY HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER

.012 Steel Wire
Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER PLATER

WEILER BRUSH - WEILER PLATER'S BRUSHES

Hardwood block
For general cleaning in the plating, metal finishing, aircraft and missile industries. Also used with inert arc aluminum welding.


WEILER BRUSH - WEILER SMALL HAND SCRATCH BRUSHES

WEILER BRUSH - WEILER SMALL HAND SCRATCH BRUSHES



WEILER BRUSH - WEILER BLOCK TYPE SCRATCH BRUSHES

WEILER BRUSH - WEILER BLOCK TYPE SCRATCH BRUSHES

For rugged cleaning on bricks, stone and similar large flat areas.


WEILER BRUSH - WEILER ECONOMY BLOCK TYPE SCRATCH BRUSHES

WEILER BRUSH - WEILER ECONOMY BLOCK TYPE SCRATCH BRUSHES

Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER BUTCHER BLOCK BRUSHES

WEILER BRUSH - WEILER BUTCHER BLOCK BRUSHES

Weiler Butcher Block Brushes - For cleaning concrete forms and green concrete after forms have been removed.


WEILER BRUSH - WEILER CHIPPING HAMMER REFILL

WEILER BRUSH - WEILER CHIPPING HAMMER REFILL

Weiler Chipping Hammer Refill - A refill brush for most chipping hammers. Used for weld cleaning.


WEILER BRUSH - WEILER WIRE DUSTER

WEILER BRUSH - WEILER WIRE DUSTER

Weiler Wire Duster - For cleaning chips, borings, solder, rust, dirt & corrosion from castings.


WEILER BRUSH - WEILER FILE CARD BRUSH

WEILER BRUSH - WEILER FILE CARD BRUSH

Waxed hardwood block
Use for file cleaning or to roughen and prepare surface material prior to sweating and soldering.


WEILER BRUSH - WEILER METAL CHIP BRUSH

WEILER BRUSH - WEILER METAL CHIP BRUSH

Weiler Small stiff wire brush for brushing hot metal. Can be exposed to flames without burning.


WEILER BRUSH - WEILER FLUE BRUSHES

WEILER BRUSH - WEILER FLUE BRUSHES

Filled with .012 round wire and fitted with 1/4" x 2" NPT pipe nipple. For internal cleaning of pipes and flues.


WEILER BRUSH - WEILER INTERNAL TUBE FITTING BRUSHES

WEILER BRUSH - WEILER INTERNAL TUBE FITTING BRUSHES

Wire fill
For internal cleaning and deburring of copper tube fittings. Also used in trucking and marine industries as a light socket cleaning brush.


WEILER BRUSH - WEILER 4-IN-1 TUBE FITTING BRUSH

WEILER BRUSH - WEILER 4-IN-1 TUBE FITTING BRUSH

Weiler 4-in-1 tube fitting brush - One brush replaces 4! Steel wire. Cleans the outside and inside diameters of 1/2" and 3/4" tubes and fittings. Use for soldering prep, deburring, drill hole cleaning and cleaning battery terminals.


WEILER BRUSH - WEILER WALL PAINT BRUSHES

WEILER BRUSH - WEILER WALL PAINT BRUSHES

Weiler Wall Paint Brushes


WEILER BRUSH - WEILER VARNISH BRUSHES

WEILER BRUSH - WEILER VARNISH BRUSHES

Weiler Varnish Brushes


WEILER BRUSH - WEILER ANGLED SASH BRUSHES

WEILER BRUSH - WEILER ANGLED SASH BRUSHES



WEILER BRUSH - WEILER FLAT SASH BRUSHES

WEILER BRUSH - WEILER FLAT SASH BRUSHES



WEILER BRUSH - WEILER OVAL SASH BRUSHES

WEILER BRUSH - WEILER OVAL SASH BRUSHES



WEILER BRUSH - WEILER ROUND SASH BRUSHES

WEILER BRUSH - WEILER ROUND SASH BRUSHES



WEILER BRUSH - WEILER PARTS CLEANING BRUSHES

WEILER BRUSH - WEILER PARTS CLEANING BRUSHES

Stainless steel ferrule - Heavily filled


WEILER BRUSH - WEILER ECONOMY PARTS CLEANING BRUSHES

WEILER BRUSH - WEILER ECONOMY PARTS CLEANING BRUSHES

Weiler Economy Parts Cleaning Brush - Steel ferrule.
Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER INDUSTRIAL VARNISH BRUSHES

WEILER BRUSH - WEILER INDUSTRIAL VARNISH BRUSHES



WEILER BRUSH - WEILER BENT RADIATOR BRUSH

WEILER BRUSH - WEILER BENT RADIATOR BRUSH



WEILER BRUSH - WEILER DETAIL BRUSHES

WEILER BRUSH - WEILER DETAIL BRUSHES



WEILER BRUSH - WEILER FOAM APPLICATOR BRUSHES

WEILER BRUSH - WEILER FOAM APPLICATOR BRUSHES



WEILER BRUSH - WEILER CHIP AND OIL BRUSHES

WEILER BRUSH - WEILER CHIP AND OIL BRUSHES



WEILER BRUSH - WEILER ECONOMY CHIP AND OIL BRUSHES

WEILER BRUSH - WEILER ECONOMY CHIP AND OIL BRUSHES

Economy brushes provide lasting, efficient service at minimal cost.


WEILER BRUSH - WEILER RED SABLE WATERCOLOR BRUSHES

WEILER BRUSH - WEILER RED SABLE WATERCOLOR BRUSHES

Seamless nickel ferrule. Pointed tip - Round black handle.


WEILER BRUSH - WEILER BLACK BRISTLE MARKING BRUSHES

WEILER BRUSH - WEILER BLACK BRISTLE MARKING BRUSHES

Long, lacquered handle.


WEILER BRUSH - WEILER FLAT MARKING BRUSHES

WEILER BRUSH - WEILER FLAT MARKING BRUSHES

Ox hair - Single stroke - Round black handle.


WEILER BRUSH - WEILER SIGN BRUSHES

WEILER BRUSH - WEILER SIGN BRUSHES

Ox hair - Flat red handle.


WEILER BRUSH - WEILER FITCH BRUSHES

WEILER BRUSH - WEILER FITCH BRUSHES

Black china bristle - Chiseled edge - Clear lacquered handle.


WEILER BRUSH - WEILER LACQUERING BRUSHES

WEILER BRUSH - WEILER LACQUERING BRUSHES

Seamless aluminum ferrule. Camel hair - Round black handle.


WEILER BRUSH - WEILER BRIDLED GLUE BRUSHES

WEILER BRUSH - WEILER BRIDLED GLUE BRUSHES

Weiler Bridled Glue Brush - Grey china bristle - Steel ferrule - Long foam handle.


WEILER BRUSH - WEILER ACID/FLUX BRUSHES

WEILER BRUSH - WEILER ACID/FLUX BRUSHES

Horsehair - Tin ferrule.


WEILER BRUSH - WEILER STYLUS BRUSH

WEILER BRUSH - WEILER STYLUS BRUSH

Stiff grey horsehair. Aluminum tube with cork to hold cleaning fluid. For cleaning electrical contact points.


WEILER BRUSH - WEILER STENCIL BRUSHES

WEILER BRUSH - WEILER STENCIL BRUSHES

China bristle - Seamless steel ferrule - Lacquered wood handle.



WEILER BRUSH - WEILER DOPE BRUSHES

WEILER BRUSH - WEILER DOPE BRUSHES

Weiler Dope Brush - With hanger for coating applications in drilling operations.


WEILER BRUSH - WEILER DAUBER BRUSH

WEILER BRUSH - WEILER DAUBER BRUSH

For coating applications in pipeline construction.


WEILER BRUSH - WEILER PROFESSIONAL GRADE ROLLERS

WEILER BRUSH - WEILER PROFESSIONAL GRADE ROLLERS

Poly blend with phenolic core.



WEILER BRUSH - WEILER INDUSTRIAL GRADE ROLLERS

WEILER BRUSH - WEILER INDUSTRIAL GRADE ROLLERS

Poly blend with PVC core.


WEILER BRUSH - WEILER ECONOMY ROLLERS

WEILER BRUSH - WEILER ECONOMY ROLLERS

Poly blend with treated paper core.


WEILER BRUSH - WEILER SPECIALTY ROLLERS

WEILER BRUSH - WEILER SPECIALTY ROLLERS

Can be used with all paints. Ideal for trim and touch-up.


WEILER BRUSH - WEILER FRAMES

WEILER BRUSH - WEILER FRAMES

All metal with two plastic caps. Solid plastic handle with threaded grip.


WEILER BRUSH - WEILER PAINT TRAYS

WEILER BRUSH - WEILER PAINT TRAYS



WEILER BRUSH - WEILER BUCKET GRID

WEILER BRUSH - WEILER BUCKET GRID

Weiler bucket grid - Permits use of paint roller directly from a 5-gallon pail.


WEILER BRUSH - WEILER PAINTER

WEILER BRUSH - WEILER PAINTER'S MITT

Can be used with all types of paint. Use on pipes, rails, fences and hard to reach areas.


WALTER ABRASIVES - WALTER LINE-MATE III DRUM SANDER

WALTER ABRASIVES - WALTER LINE-MATE III DRUM SANDER

Walter Abrasives - Walter Line-Mate III

Walter Abrasives - Walter Line-Mate III Drum Sander surface finishing system is the most versatile method for all applications where a linear scratch pattern is required.



WALTER ABRASIVES - WALTER BIG BUFF III - POLISHER/SANDER

WALTER ABRASIVES - WALTER BIG BUFF III - POLISHER/SANDER

Walter Abrasives - Walter Big Buff III - Polisher/Sander

Walter Abrasives - Walter Big Buff III - Polisher/Sander has been designed specifically to integrate with unique Walter Quick-Step products to offer you the most versatile metal surface finishing system available today.



WALTER ABRASIVES - WALTER BLENDEX U - SUPERIOR FINISHES IN LESS TIME

WALTER ABRASIVES - WALTER BLENDEX U - SUPERIOR FINISHES IN LESS TIME

Walter Abrasives - BLENDEX Unitized Technology is used for cleaning, deburring, blending and finishing any kind of metal. These unitized wheels can be used on stainless steel, titanium, aluminum, alloys and even plastic and fiberglass.



WALTER ABRASIVES - WALTER ENDURO-FLEX - ONE STEP FINISHING DISCS

WALTER ABRASIVES - WALTER ENDURO-FLEX - ONE STEP FINISHING DISCS

Walter Abrasives - Walter Enduro-Flex Flap Discs

Walter Abrasives - Walter Enduro-Flex One Step Finishing Discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces daily. A new, ultra sharp and refined zirconium grain stays sharper longer to remove more material faster. A special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. The Enduro-Flex TURBO flap discs offer additional cost savings for users looking for faster metal removal.



WALTER ABRASIVES - WALTER QUICK-STEP - METAL SURFACE FINISHING SYSTEM

WALTER ABRASIVES - WALTER QUICK-STEP - METAL SURFACE FINISHING SYSTEM

Walter Abrasives - Walter Quick-Step Metal Surface Finishing System

Walter Abrasives - Walter Quick-Step Metal Surface Finishing System meets all your finishing needs - whether blending in welds, cleaning surfaces, refining and enhancing existing finishes, or bringing out a mirror finish on stainless steel, steel, aluminum or any other ferrous and nonferrous metals. Use in conjunction with the Walter quick change TWIST Metal Finishing System.



WALTER ABRASIVES - WALTER ACCESSORIES

WALTER ABRASIVES - WALTER ACCESSORIES

Walter Abrasives - Accessories for Walter Abrasives Products.


WALTER ABRASIVES - WALTER ALLSTEEL - VERSATILE PERFORMANCE GRINDING

WALTER ABRASIVES - WALTER ALLSTEEL - VERSATILE PERFORMANCE GRINDING

Walter Abrasives - Walter Allsteel - Versatile Performance Grinding wheels are designed to deliver top performance when working on both steel and stainless steel. They incorporate the latest developments in grain and bonding technology to lower your grinding costs.



WALTER ABRASIVES - WALTER  ALUMINUM - HIGH PERFORMANCE GRINDING AND CUTTING IN SOFT METALS

WALTER ABRASIVES - WALTER ALUMINUM - HIGH PERFORMANCE GRINDING AND CUTTING IN SOFT METALS

Walter Abrasives - Walter Aluminum - High Performance Grinding and Cutting in Soft Metals. Wheels meet all the requirements for grinding and cutting of aluminum and other non-ferrous metals.



WALTER ABRASIVES - WALTER BENCH GRINDING WHEELS

WALTER ABRASIVES - WALTER BENCH GRINDING WHEELS

Walter Abrasives - Walter Bench Grinding Wheels are for general purpose grinding work on bench and pedestal grinders. They are available in a variety of grits - 24 and 36 for fast and rough grinding - 46 of intermediate requirements - 60 and 80 for finer finish work. All wheels are supplied with a set of nested reducer bushings t fit 1", 3/4", 5/8" and 1/2" shafts.


WALTER ABRASIVES - WALTER BLENDEX NON-WOVEN ABRASIVES

WALTER ABRASIVES - WALTER BLENDEX NON-WOVEN ABRASIVES

Walter Abrasives - Walter Blendex U™

Walter Abrasives - Walter Blendex U  Unitized Technology is used for deburring, cleaning, blending and finishing any kind of metal as well as plastic and fiberglass. Non-Woven Abrasives are made from non-woven industrial grade nylon impregnated throughout with abrasive grain and bonded with heavy duty resin. This material long lasting, non-loading and flexible.



WALTER ABRASIVES - WALTER CARBIDE BURRS

WALTER ABRASIVES - WALTER CARBIDE BURRS

Walter Abrasives - Walter Carbide Burrs are made from first grade tungsten carbide and are manufactured with the highest degree of accuracy for perfect concentricity and balance. These carbide burrs offer fast material removal and longest life.


WALTER ABRASIVES - WALTER CHOPCUT - HIGH PERFORMANCE CUTTING WITH PORTABLE CHOP SAWS

WALTER ABRASIVES - WALTER CHOPCUT - HIGH PERFORMANCE CUTTING WITH PORTABLE CHOP SAWS

Walter Abrasives - Walter Chopcut - High Performance Cutting with Portable Chop Saw wheels have been specifically developed for use on portable abrasive chop saws. Their formulation allows fast cutting with minimal load on the motor. They are therefore easy on the operator as well as on the saw.


WALTER ABRASIVES - WALTER CONCRETE - HIGH PERFORMANCE GRINDING AND CUTTING

WALTER ABRASIVES - WALTER CONCRETE - HIGH PERFORMANCE GRINDING AND CUTTING

Walter Abrasives - Walter Concrete - High Performance Grinding and Cutting wheels are specially formulated for grinding and cutting all types of concrete, cast iron, stone and other building materials.



WALTER ABRASIVES - WALTER COOLCUT FLAP WHEELS

WALTER ABRASIVES - WALTER COOLCUT FLAP WHEELS

Walter Abrasives - Walter Coolcut Flap Wheels are excellent for weld blending and general finishing work. All 6-1/2" wheels are mounted with a pair of flanges for use on straight shaft or bench grinders.


WALTER ABRASIVES - WALTER COOLCUT SHOP ROLLS & SHEETS

WALTER ABRASIVES - WALTER COOLCUT SHOP ROLLS & SHEETS

Walter Abrasives - Walter Coolcut Shop Rolls & Sheets are made from fast cutting aluminum oxide abrasive grain that is resin bonded onto a high quality cotton cloth backing for cool, effective cutting and maximum resistance to wear. For general purpose sanding, light removal and deburring, surface cleaning and finishing.


WALTER ABRASIVES - WALTER CUP WHEELS

WALTER ABRASIVES - WALTER CUP WHEELS

Walter Abrasives - Walter Cup Wheels

Walter Abrasives - Walter Cup Wheels are widely used for rough grinding or snagging work. They are supplied with a deeply anchored wrap-around steel hub for maximum saftely and long life, and a 5/8-11 threaded arbor for spin-on mounting.



WALTER ABRASIVES - WALTER DOUBLE-X - PREMIUM PERFORMANCE GRINDING

WALTER ABRASIVES - WALTER DOUBLE-X - PREMIUM PERFORMANCE GRINDING

Walter Abrasives - Walter Double-X - Premium performance Grinding wheels incorporate the very latest advances in abrasive grain, bonding and manufacturing technology. When all costs are considered, Double-X is the wheel that grinds at the lowest cost.



WALTER ABRASIVES - WALTER DRESSING STONES

WALTER ABRASIVES - WALTER DRESSING STONES

Walter Abrasives - Walter Dressing Stones.


WALTER ABRASIVES - WALTER FLEXCUT - PREMIUM PERFORMANCE UNIVERSAL FLEXIBLE GRINDING WHEEL

WALTER ABRASIVES - WALTER FLEXCUT - PREMIUM PERFORMANCE UNIVERSAL FLEXIBLE GRINDING WHEEL

Walter Abrasives - Walter Flexcut - Premium Performance Flexible Grinding Wheels are especially formulated to deliver superior performance on all ferrous and non-ferrous metals.


WALTER ABRASIVES - WALTER FX CLEANING ABRASIVES

WALTER ABRASIVES - WALTER FX CLEANING ABRASIVES

Walter Abrasives - Walter FX Cleaning Abrasives are made of high density, extra-firm non-woven synthetic webbing impregnated with abrasive grain. The open structure assures cool operation and resists loading even when used on soft metals. They are most effective for cleaning metal surfaces, like removing paint, coatings, burn marks, rust, scale, gaskets and similar applications.


WALTER ABRASIVES - WALTER HIGH PERFORMANCE CHEMICAL TOOLS & CHEMICALS

WALTER ABRASIVES - WALTER HIGH PERFORMANCE CHEMICAL TOOLS & CHEMICALS

Walter Abrasives - High Performance Chemical Tools.


WALTER ABRASIVES - WALTER HP - HIGH PERFORMANCE GRINDING AND CUTTING

WALTER ABRASIVES - WALTER HP - HIGH PERFORMANCE GRINDING AND CUTTING

Walter Abrasives - Walter HP - High Performance Grinding and Cutting Wheels are formulated to give highest productivity, safety and operator comfort on all types of grinders - air grinders, electric grinders/sanders and portable high speed angle grinders. Exceptional performance in grinding down welds, preparing weld edges, deburring, shaping, cleaning and cutting.



WALTER ABRASIVES - WALTER LINE FINISHING ABRASIVES

WALTER ABRASIVES - WALTER LINE FINISHING ABRASIVES

Walter Abrasives - Walter Line Finishing Abrasives

Walter Abrasives - Walter Line Finishing Abrasives offer a complete range of innovative abrasives designed to match any line finish and reduce finishing costs. Whether working in stainless steel, steel, aluminum, brass, copper or other alloys, applying a line finish is done quickly and with little effort.



WALTER ABRASIVES - WALTER MOUNTED POINTS

WALTER ABRASIVES - WALTER MOUNTED POINTS

Walter Abrasives - Walter Mounted Points are made from the finest grades of abrasive grain. Their shafts are precisely centered and every point is dressed for perfect balance without run-out or vibration. 1/4" shaft.


WALTER ABRASIVES - WALTER MOUNTED WIRE BRUSHES - FOR DIE GRINDERS

WALTER ABRASIVES - WALTER MOUNTED WIRE BRUSHES - FOR DIE GRINDERS

Walter Abrasives - Walter Mounted Wire Brushes - For Die Grinders are made from the highest industrial quality wire with optimum density for fast material removal and longest life. They are perfectly balanced for vibration free running. Shafts must be fully inserted into the collet and firmly secured. 1/4" shaft.


WALTER ABRASIVES - WALTER PIPEFITTER - OUTSTANDING PERFORMANCE IN PIPELINE CONSTRUCTION

WALTER ABRASIVES - WALTER PIPEFITTER - OUTSTANDING PERFORMANCE IN PIPELINE CONSTRUCTION

Walter Abrasives - Walter Pipefitter - Outstanding Performance in Pipeline Construction wheels are specially formulated and reinforced for grinding joint welds between passes in pipeline construction and pipe fabrication. They do not contain iron. sulfur or chlorine(Fe, S, CI) and will not contaminate stainless steel.


WALTER ABRASIVES - WALTER PORTACUT - HIGH SPEED CUTTING WITH GAS AND ELECTRIC POWER SAWS

WALTER ABRASIVES - WALTER PORTACUT - HIGH SPEED CUTTING WITH GAS AND ELECTRIC POWER SAWS

Walter Abrasives - Walter Portacut - High Speed Cutting with Gas and Electric Power Saws wheels are the most reliable cut-off wheels for all on-site cutting jobs with portable gas and electric power saws. They are specially reinforced for added safety and formulated for an optimal cutting speed and wheel life ratio.


WALTER ABRASIVES - WALTER RAILCUT - PERFORMANCE RAIL CUTTING WITH GAS AND ELECTRIC POWER SAWS

WALTER ABRASIVES - WALTER RAILCUT - PERFORMANCE RAIL CUTTING WITH GAS AND ELECTRIC POWER SAWS

Walter Abrasive - rail cut wheels are specially formulated for fast cutting into all types of rail without glazing. They are heavily reinforced for maximum safety and smoothness.



WALTER ABRASIVES - WALTER RIPCUT - HIGH PERFORMANCE CUTTING WITH ABRASIVE CUT-OFF MACHINES

WALTER ABRASIVES - WALTER RIPCUT - HIGH PERFORMANCE CUTTING WITH ABRASIVE CUT-OFF MACHINES

Walter Abrasives - Walter Ripcut - High Performance Cutting with Abrasive Cut-Off Machine wheels are formulated for use on stationary cut-off machines, oto make more and faster cuts for the lowest possible cost per cut.


WALTER ABRASIVES - WALTER SANDING DISCS

WALTER ABRASIVES - WALTER SANDING DISCS

Walter Abrasives - Walter Sanding Discs are constructed with highest quality fibre backing to withstand the centrifugal forces of high speed sanding. Job matched abrasive grains are applied and imbedded in the resin bond by an electrostatic process to deliver the best cutting edge to the surface for a uniform grain coverage and consistent quality finishes.


WALTER ABRASIVES - WALTER SAUCER-CUP BRUSHES - FOR ANGLE GRINDERS

WALTER ABRASIVES - WALTER SAUCER-CUP BRUSHES - FOR ANGLE GRINDERS

Walter Abrasives - Walter Saucer Cup Brushes - for Angle Grinders combine the advantages of both wire cup and wire wheel brushes. They feature a unique saucer cup shape which allows them to work in hard to reach spots like inside corners, edges and contours.


WALTER ABRASIVES - WALTER STAINLESS - SUPERIOR GRINDING AND CUTTING

WALTER ABRASIVES - WALTER STAINLESS - SUPERIOR GRINDING AND CUTTING

Walter Abrasives - Walter Stainless - Superior Grinding and Cutting wheels are excellent for use on all nickel alloyed steels in tough and demanding applications. They are made with highly refined ingredients which do not contain iron, sulfur or chlorine (Fe, S, CI) and will not contaminate stainless steel.


WALTER ABRASIVES - WALTER TOUGH CUT - HIGH PERFORMANCE CUTTING WITH ANGLE GRINDERS AND CIRCULAR SAWS

WALTER ABRASIVES - WALTER TOUGH CUT - HIGH PERFORMANCE CUTTING WITH ANGLE GRINDERS AND CIRCULAR SAWS

Walter Abrasives - Walter Toughcut - High Performance Cutting with Angle Grinder and Circular Saws are made with the characteristics of these tools in mind. they cut fast and free with binding, minimizing the load on the tool to maintain high RPM for a clean cut and best all around performance.


WALTER ABRASIVES - WALTER TWIST QUICK CHANGE - METAL SURFACE SYSTEM

WALTER ABRASIVES - WALTER TWIST QUICK CHANGE - METAL SURFACE SYSTEM

Walter Abrasives - Walter Twist Quick Change - Metal Surface Finishing System makes changing discs easy and fast, eliminating downtime and maximizing productivity. This range of small grinding discs and conditioning discs is the ideal system for light to medium duty surface finishing of all ferrous and non-ferrous metals.


WALTER ABRASIVES - WALTER TWO-IN-ONE FLAP WHEELS

WALTER ABRASIVES - WALTER TWO-IN-ONE FLAP WHEELS

Walter Abrasives - Walter Two-in-One Flap Wheels combine two finishing steps in one. They remove material nearly as fast as a flap wheel while leaving a uniform satin finish. For use on a wide variety of materials.


WALTER ABRASIVES - WALTER WIRE CUP BRUSHES - FOR ANGLE GRINDERS

WALTER ABRASIVES - WALTER WIRE CUP BRUSHES - FOR ANGLE GRINDERS

Walter Abrasives - Walter Wire Cup Brushes - for Angle Grinders are designed for high performance flat surface brushing of large areas. They are made from top quality wire that is precisely positioned for perfect balance and smooth but aggressive and fast brushing action. All cup brushes are equipped with threaded arbors for quick and easy mounting.


WALTER ABRASIVES - WALTER WIRE WHEEL BRUSHES - FOR ANGLE GRINDERS

WALTER ABRASIVES - WALTER WIRE WHEEL BRUSHES - FOR ANGLE GRINDERS

Walter Abrasives - Walter Wire Wheel Brushes - for Angle Grinders are used for working in grooves and for heavy duty surface brushing. They are made from top quality wire that is tightly knotted and each tuft is precisely positioned and set for perfect balance and vibration free operation. The narrow face contact gives the highest impact and fast material removal.


WALTER ABRASIVES - WALTER WIRE WHEEL BRUSHES - FOR BENCH AND PEDESTAL GRINDERS

WALTER ABRASIVES - WALTER WIRE WHEEL BRUSHES - FOR BENCH AND PEDESTAL GRINDERS

Walter Abrasives - Walter Wire Wheel Brushes - for Bench and Pedestal Grinders are made from the highest industrial quality wire, perfectly balanced for smooth running and long life. They are most commonly used to remove paint, rust and corrosion, for light deburring and similar cleaning jobs.


WALTER ABRASIVES - WALTER ZIP - HIGH PERFORMANCE CUTTING AND GRINDING WITH STRAIGHT SHAFT AND DIE GRINDERS

WALTER ABRASIVES - WALTER ZIP - HIGH PERFORMANCE CUTTING AND GRINDING WITH STRAIGHT SHAFT AND DIE GRINDERS

Walter Abrasives - Walter Zip - High Performance Cutting and Grinding with Straight Shaft and Die Grinder wheels are formulated for high performance cutting, notching and grinding. They are made from highly refined ingredients which will not contaminate stainless steel.


WALTER ABRASIVES - WALTER ZIP - HIGH PERFORMANCE CUTTING WITH DEPRESSED CENTER WHEELS

WALTER ABRASIVES - WALTER ZIP - HIGH PERFORMANCE CUTTING WITH DEPRESSED CENTER WHEELS

Walter Abrasives - Walter Zip

High Performance Cutting with Depressed Center Wheels

Walter Abrasives - Walter Zip - High Performance Cutting with Depressed Center Wheels Type 27 are formulated for the most demanding cutting applications in steel or stainless steel. They are heavily reinforced for extra safety. Effective for flush cutting applications.



WALTER ABRASIVES - WALTER ZIP SPIN-ON - HIGH PERFORMANCE CUTTING WITH SPIN-ON SYSTEM

WALTER ABRASIVES - WALTER ZIP SPIN-ON - HIGH PERFORMANCE CUTTING WITH SPIN-ON SYSTEM

Walter Abrasives - exclusive- high performance cutting with spin-on system. The ZIP wheel cut-off wheels are now available with the exclusive Spin-On mounting system. Let the Walter ZIP Spin-On take your productivity to the next level.


WALTER ABRASIVES - WALTER ZIP WHEEL - HIGH PERFORMANCE CUTTING WITH ANGLE GRINDERS AND CIRCULAR SAWS

WALTER ABRASIVES - WALTER ZIP WHEEL - HIGH PERFORMANCE CUTTING WITH ANGLE GRINDERS AND CIRCULAR SAWS

Walter Abrasives - Walter Zip Wheel

High Performance Cutting with Angle Grinders and Circular Saws

Walter Abrasives - Walter Zip Wheel - High Performance Cutting with Angle Grinders and Circular Saws cut faster and cooler requiring less power than any other thin cut-off wheel. They feature an integrated rib design for better rigidity, cooler cutting and straighter cuts. Used daily by metal fabricators, maintenance departments, sheet metal shops, welding shops, mechanical contractors, equipment manufacturers and automotive shops.



WALTER ABRASIVES - WALTER COMBO ZIP - HIGH PERFORMANCE CUTTING AND DEBURRING ALL IN ONE

WALTER ABRASIVES - WALTER COMBO ZIP - HIGH PERFORMANCE CUTTING AND DEBURRING ALL IN ONE

Walter Abrasives - Cut and grind with the same wheel. Only 5/64" thick, these tough cut-off wheels can bear the force of lateral pressure to allow the operator to light grind and deburr in the safest way. These cut-off wheels can also be used for notching, root pass cleaning and even chamfering. Equipped with metal protective hub for extra strength, control and safety.


Osborn Wire Brush - Osborn ATB Abrasive Nylon Brushes

Osborn Wire Brush - Osborn ATB Abrasive Nylon Brushes

Osborn Wire Brush - Osborn ATB Abrasives Nylon Brushes are designed specifically for mechanical finishing tasks such as deburring, sharp edge removal, radiusing, edge contouring, de-fuzzing, surface refinement and conditioning, plateau finishing, blending imperfections, reduction of surface stresses and micro crack propagation, cleaning, polishing and surface wiping prior to inspection gauging.



Osborn Wire Brush - Osborn Wheel Brushes

Osborn Wire Brush - Osborn Wheel Brushes

Osborn Wire Brush - Osborn Wheel Brushes are ideal for removal of material, flash, rust, paint, cleaning weld bead, deburring, deflashing, edge blending, skiving and buffing. Osborn Wire Brush - Osborn Wheel Brushes are produced in a full range of diameters, with a selection of operating face widths to perform almost any finishing task.



Osborn Wire Brush - Osborn Cup Brushes

Osborn Wire Brush - Osborn Cup Brushes

Osborn Wire Brush - Osborn Cup Brushes are made in three different types: knotted steel and stainless steel wire for heavy duty, crimped wire for lighter surface preparation and deburring, and ATB filaments for finishing work. Osborn Wire Brush - Osborn Cup Brushes are easily mounted on CNC machines and portable tools, air or electric powered.



Osborn Wire Brush - Osborn End Brushes

Osborn Wire Brush - Osborn End Brushes

Osborn Wire Brush - Osborn End Brushes are designed to have the ends of the fill strands do the bulk of the work, however the sides can also be used to finish vertical surfaces that parallel the shaft. Osborn Wire Brush - Osborn End Brushes are made in knot, crimped, and straight wire of carbon and stainless steel, brass, ATB filaments and other non-metallics, and are especially suitable for CNC machines, portable air and electric tools in tight spaces.



Osborn Wire Brush - Osborn Internal Brushes

Osborn Wire Brush - Osborn Internal Brushes

Osborn Wire Brush - Osborn Internal Brushes are primarily used in CNC machines, portable tools and drill presses for cross hole deburring and fast cleaning and finishing of inaccessible surfaces such as small diameter bores and internally threaded surfaces. Osborn Wire Brush - Osborn Internal Brushes are made in steel, stainless steel, brass, nylon and ATB filaments.



Osborn Wire Brush - Osborn Wide Face Brushes

Osborn Wire Brush - Osborn Wide Face Brushes

Osborn Wire Brush - Osborn Wide Face Brushes are designed for surface conditioning, finishing, scrubbing and cleaning of metal coil and sheet stock, shaped products, and specialties such as printed circuit boards. Osborn Wire Brush - Osborn Wide Face Brushes can also be used on annealing/pickling, galvanizing, paint coating, and other large area, high production lines.



Osborn Wire Brush - Osborn Abrasives

Osborn Wire Brush - Osborn Abrasives

Osborn Wire Brush - Osborn Abrasives

Osborn Wire Brush - Osborn Abrasives high-quality line of cut-off wheels, grinding wheels, combination wheels and flap discs offer strength, durability, speed, convenience and economy to every job.



Osborn Wire Brush - Osborn Maintenance Brushes

Osborn Wire Brush - Osborn Maintenance Brushes

Osborn Wire Brush - Osborn Maintenance Brushes offer a complete line of industrial janitorial products designed for fast, efficient and thorough cleaning, scrubbing and washing jobs.



Osborn Wire Brush - Osborn Paint Brushes

Osborn Wire Brush - Osborn Paint Brushes

Osborn Wire Brush - Osborn Paint Brushes offer quality and dependability for maximum value and performance on all industrial and professional painting jobs.


Osborn Wire Brush - Osborn Economy Brushes

Osborn Wire Brush - Osborn Economy Brushes

Osborn Wire Brush - Osborn Economy Brushes are designed as an economical alternative to high-value Osborn brushes. Osborn Wire Brush - Osborn Economy Brushes offer consistent quality that outperforms other DIY and professional power brush lines.



Standard Abrasives - Coated & Bonded Abrasives

Standard Abrasives - Coated & Bonded Abrasives

Standard Abrasives - Coated Abrasives and Bonded Abrasives

Standard Abrasives - Coated and Bonded Abrasives include high performance cartridge rolls, cross pads, cut-off wheels, flap discs, overlap cloth discs, psa discs, quick-change and resin fiber discs, slotted cloth discs, large and small flap wheels, shop rolls, cloth and paper sanding sheets, spiral bands, square pads and tapered cone points. Standard Abrasives offers their coated abrasive products in aluminum oxide, zirconium, ceramic and silicon carbide grains.

See all Standard Abrasives - Coated Abrasives and Bonded Abrasives



Standard Abrasives - Non-Woven Abrasives

Standard Abrasives - Non-Woven Abrasives

Standard Abrasives - Non-Woven Abrasives

Standard Abrasives - Non-Woven Abrasives products include surface conditioning bands, surface conditioning belts, buff and blend circle buff, combi-wheels, cross buffs, combi-cross buffs, buff and blend discs, cleaning discs, edge pro surface conditioning discs, felt polishing discs, surface conditioning flap discs, surface conditioning discs, unitized type 27 wheels, buff & blend mounted and unmounted flap brushes, hand pads and power pads, hook and loop glove kits, unitized mounted points, buff and blend rolls, surface conditioning FE stars, buff and blend wheels, convolute wheels and unitized wheels.

See all Standard Abrasives Non-Woven Abrasive Products



Standard Abrasives - Hardware and Adapters

Standard Abrasives - Hardware and Adapters

Standard Abrasives - Hardware and Adapters

Standard Abrasives - Hardware and Adapters are made of the highest quality materials. They include adapters for flap wheels, holder pads, flange adapters for convolute wheels and flap brushes, holder pads for hand pads, edge pro, hook & loop, large diameter hard face, psa and small diameter discs, mandrels for cartridge rolls, circle buffs, cross buffs, cross and square pads, disc pads, P.A.R.T. discs, plain, slotted and overlap discs, tapered cone points and unitized wheels, reducer bushings for flap wheels and rubber drums.

See all Standard Abrasives - Hardware and Adapters



Standard Abrasives - Mini Test Kits

Standard Abrasives - Mini Test Kits

Standard Abrasives - Mini Test Kits include:

See all Standard Abrasives Mini Test Kits



CS UNITEC SURFACE FINISHING TOOLS & ACCESSORIES

CS UNITEC SURFACE FINISHING TOOLS & ACCESSORIES

CS Unitec offers professional power tools and abrasive accessories for surface finishing-grinding-polishing-deburring on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.
The Pipe-Max Pneumatic Weld Seam Grinder & Sander LBR1506AIR polishes stainless and all metals - for sanding handrails and pipes up to 12" - grinds weld seams on flat surfaces. Grind, polish and deburr on Stainless Steel and other metals with the popular PTX Eco Smart Surface Finisher - 47002A- 12.27 Amp (1350 Watts) 110 Volt/60 Hz.


Mirka Ceros Dual Action Random Orbital Sanders

Mirka Ceros Dual Action Random Orbital Sanders

MIRKA CEROS Dual Action Random Orbital Sanders

Compact Electric Random Orbital Sanders - CEROS



Mirka Abrasives Abranet Mesh Grip Discs-Rolls-Sheets 9A Series-9S Series

Mirka Abrasives Abranet Mesh Grip Discs-Rolls-Sheets 9A Series-9S Series

Mirka Abrasives Abranet Mesh Grip Discs-Rolls-Sheets 9A Series-9S Series

Abranet Mesh Grip Discs-Rolls-Sheets 9A Series-9S Series

The original, multifunctional net sanding material, Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

See All Mirka Abrasives Abranet Mesh Grip Products



Mirka Abrasives-Bulldog Gold Brand Abrasives Products-Sandpaper-Sanding Disc-Abrasive Rolls

Mirka Abrasives-Bulldog Gold Brand Abrasives Products-Sandpaper-Sanding Disc-Abrasive Rolls

Mirka Abrasives-Bulldog Gold Brand Abrasives Products

Abrasive PSA Sanding Disc Rolls

For over 25 years Mirka's Bulldog Gold has been the benchmark for abrasive finishing products. Mirka is proud to introduce the next generation of Bulldog Gold. Designed to meet all of your finishing needs, the bar has been raised once again.



CS UNITEC SURFACE FINISHING ABRASIVES & ACCESSORIES

CS UNITEC SURFACE FINISHING ABRASIVES & ACCESSORIES

CS Unitec offers professional power tools and abrasive accessories for surface finishing on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.


CS UNITEC ROTARY HAMMER DRILLS

CS UNITEC ROTARY HAMMER DRILLS

CS Unitec Rotary Hammer Drills are ideal for drilling holes in concrete, brick and masonry, as well as straight drilling of steel and wood. The safety clutch protects against overloading and jamming.


CS UNITEC MAGNETIC DRILLS

CS UNITEC MAGNETIC DRILLS

CS Unitec portable magnetic drills are ideal for drilling structural steel and virtually any metal. They offer the most compact and powerful series of portable magnetic drills for holes up to 5" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. The complete product line includes electric, pneumatic and hydraulic.


CS UNITEC CORE DRILLS

CS UNITEC CORE DRILLS

CS Unitec offers the most complete range of lightweight portable diamond core drilling machines and rigs. Ideal for drilling holes in floors, walls, ceilings, and all concrete anchoring systems. Easy to use for fast drilling of reinforced concrete, concrete, brick, block and stone. All drills are equipped with a "slip clutch". Models are available for wet or dry drilling.


CS UNITEC SAWS & CUTTING

CS UNITEC SAWS & CUTTING

CS Unitec portable saws and tools are ideal for cutting pipe, structural steel, tanks, bolts, angle iron, concrete and other materials, including plastic and wood. They offer the widest range of portable pneumatic, electric and hydraulic saws.


CS UNITEC MAG DRILL ACCESSORIES

CS UNITEC MAG DRILL ACCESSORIES



Kalamazoo Abrasive Saws

Kalamazoo Abrasive Saws



Kalamazoo Abrasive Belt Sanders

Kalamazoo Abrasive Belt Sanders



Kalamazoo Abrasive Disc Sanders

Kalamazoo Abrasive Disc Sanders



Kalamazoo Additional Products

Kalamazoo Additional Products



Metabo Abrasives Closeouts

Metabo Abrasives Closeouts

Metabo Abrasives Close-Outs!!! Supplies Are Limited!!!
Lowest Prices Anywhere!!!!


Abrasive Dynafile Sanding Belts 1/8 x 18

Abrasive Dynafile Sanding Belts 1/8 x 18



Abrasive Dynafile Sanding Belts 1/8 x 24

Abrasive Dynafile Sanding Belts 1/8 x 24



Abrasive Dynafile Sanding Belts 1/4 x 18

Abrasive Dynafile Sanding Belts 1/4 x 18

1/4" x 18" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with Dynabrade Dynafile II - many popular models:Dynabrade 40320Dynabrade 40381Dynabrade 40352 and many other sanding belt tools.

1/4 x 18 Sanding Belts In Stock - Ready to Ship:

See all 1/4" x 18" Sanding Belts



Abrasive Dynafile Sanding Belts 1/4 x 24

Abrasive Dynafile Sanding Belts 1/4 x 24

1/4" x 24" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with The ORIGINAL Dynabrade Dynafile 14000and other sanding belt tools.

1/4 x 24 Sanding Belts IN STOCK - READY TO SHIP!

See all 1/4" x 24" Sanding Belts



Abrasive Dynafile Sanding Belts 3/8 x 13

Abrasive Dynafile Sanding Belts 3/8 x 13

3/8" x 13" Abrasive Sanding Belts 

Our brand of abrasive sanding belts are for use with Dynabrade Mini-Dynafile II 15013 and other sanding belt tools.

3/8" x 13" SANDING BELTS IN STOCK - READY TO SHIP! 

See all 3/8" x 13" Sanding Belts



Abrasive Dynafile Sanding Belts 1/2 x 12

Abrasive Dynafile Sanding Belts 1/2 x 12



Abrasive Dynafile Sanding Belts 1/2 x 13

Abrasive Dynafile Sanding Belts 1/2 x 13



Abrasive Dynafile Sanding Belts 1/2 x 18

Abrasive Dynafile Sanding Belts 1/2 x 18

1/2" x 18" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with Dynabrade Dynafile II - many popular models: Dynabrade 40320, Dynabrade 40381, Dynabrade 40352 and many other sanding belt tools.

1/2" X 18" Sanding Belts In Stock - Ready to Ship:

See all 1/2" x 18" Sanding Belts



Abrasive Dynafile Sanding Belts 1/2 x 24

Abrasive Dynafile Sanding Belts 1/2 x 24

1/2" x 24" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with The ORIGINAL Dynabrade Dynafile 14000 and other sanding belt tools.

1/2 x 24 Sanding Belts IN STOCK - READY TO SHIP!

See all 1/2" x 24" Sanding Belts



Abrasive Dynafile Sanding Belts 3/4 x 18

Abrasive Dynafile Sanding Belts 3/4 x 18

3/4" x 18" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with Dynabrade Dynafile II - many popular models:Dynabrade 40320Dynabrade 40381Dynabrade 40352 and many other sanding belt tools.

In Stock - Ready to Ship:

See all 3/4" x 18" Sanding Belts



Abrasive Dynafile Sanding Belts 3/4 x 20-1/2

Abrasive Dynafile Sanding Belts 3/4 x 20-1/2



Abrasive Sanding Belts 3/4 x 77

Abrasive Sanding Belts 3/4 x 77



Abrasive Dynafile Sanding Belts 1 x 12

Abrasive Dynafile Sanding Belts 1 x 12

1" x 12" Abrasive Sanding Belts



Abrasive Dynafile Sanding Belts 1 x 18

Abrasive Dynafile Sanding Belts 1 x 18



Abrasive Dynafile Sanding Belts 1 x 21

Abrasive Dynafile Sanding Belts 1 x 21



Abrasive Dynafile Sanding Belts 1 x 30

Abrasive Dynafile Sanding Belts 1 x 30

1" x 30" Abrasive Sanding Belts

1" x 30" Sanding Belts In stock - Ready to Ship!

 

See all 1" x 30" Sanding Belts



Abrasive Sanding Belts 1 x 42

Abrasive Sanding Belts 1 x 42

1" x42" ABRASIVE SANDING BELTS

Our brand of 1" x 42" abrasive sanding belts are for use with Kalamazoo 1SM Belt Sander and other belt sander tools.

1" X 42" SANDING BELTS IN STOCK - READY TO SHIP!

See all 1" x 42" ABRASIVE SANDING BELTS



Abrasive Sanding Belts 1 x 64

Abrasive Sanding Belts 1 x 64



Abrasive Sanding Belts 1 x 72

Abrasive Sanding Belts 1 x 72



Abrasive Sanding Belts 1 x 77

Abrasive Sanding Belts 1 x 77



Abrasive Sanding Belts 1-1/8 x 21

Abrasive Sanding Belts 1-1/8 x 21



Abrasive Sanding Belts 1-1/2 x 60

Abrasive Sanding Belts 1-1/2 x 60



Abrasive Sanding Belts 1-1/2 x 72

Abrasive Sanding Belts 1-1/2 x 72



Abrasive Sanding Belts 1-1/2 x 77

Abrasive Sanding Belts 1-1/2 x 77



Abrasive Sanding Belts 2 x 17-3/4

Abrasive Sanding Belts 2 x 17-3/4



Abrasive Sanding Belts 2 x 30

Abrasive Sanding Belts 2 x 30



Abrasive Sanding Belts 2 x 34

Abrasive Sanding Belts 2 x 34



Abrasive Sanding Belts 2 x 36

Abrasive Sanding Belts 2 x 36



Abrasive Sanding Belts 2 x 48

Abrasive Sanding Belts 2 x 48

2" x 48" Abrasive Sanding Belts

2" x 48" Abrasive Sanding Belts In Stock - Ready to Ship!

See all 2" x 48" Abrasive Sanding Belts



Abrasive Sanding Belts 2 x 60

Abrasive Sanding Belts 2 x 60

2" x 60" Abrasive Sanding Belts

2" x 60" Abrasive Sanding Belts In Stock - Ready to Ship!

See all 2" x 60" Abrasive Sanding Belts



Abrasive Sanding Belts 2 x 72

Abrasive Sanding Belts 2 x 72



Abrasive Sanding Belts 2 x 132

Abrasive Sanding Belts 2 x 132

2" x 132" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with sanding belt tools and belt sanders.

In Stock - Ready to Ship:

See all 2" x 132" Sanding Belts



Abrasive Sanding Belts 2-1/4 x 80

Abrasive Sanding Belts 2-1/4 x 80



Abrasive Sanding Belts 2-3/8 x 10-1/2

Abrasive Sanding Belts 2-3/8 x 10-1/2



Abrasive Sanding Belts 2-1/2 x 14

Abrasive Sanding Belts 2-1/2 x 14



Abrasive Sanding Belts 2-1/2 x 48

Abrasive Sanding Belts 2-1/2 x 48



Abrasive Sanding Belts 2-1/2 x 60

Abrasive Sanding Belts 2-1/2 x 60

2½" x 60" Abrasive Sanding Belts

2½" x 60" Abrasive Sanding Belts In Stock - Ready to Ship!

See all 2½" x 60" Abrasive Sanding Belts



Abrasive Sanding Belts 2-1/2 x 72

Abrasive Sanding Belts 2-1/2 x 72



Abrasive Sanding Belts 3 x 10-11/16

Abrasive Sanding Belts 3 x 10-11/16

3" x 10-11/16" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with Dynabrade Mini Dynishers - many popular models:Dynabrade 13300Dynabrade 13301Dynabrade 13310 and many other sanding belt tools.

3" x 10-11/16" Abrasive Sanding Belts In Stock - Ready to Ship!

See all 3" x 10-11/16" Abrasive Sanding Belts



Abrasive Sanding Belts 3 x 18

Abrasive Sanding Belts 3 x 18

3" x 18" Abrasive Sanding Belts

3" x 18" Abrasive Sanding Belts In Stock - Ready to Ship!

See all 3" x 18" Abrasive Sanding Belts



Abrasive Sanding Belts 3 x 21

Abrasive Sanding Belts 3 x 21

3" x 21" Abrasive Sanding Belts

3" x 21"  Sanding Belts In Stock - Ready to Ship!

See all 3" x 21" Abrasive Sanding Belts



Abrasive Sanding Belts 3 x 24

Abrasive Sanding Belts 3 x 24

3" x 24" Abrasive Sanding Belts

3" x 24" Sanding Belts In Stock - Ready to Ship!

See all 3" x 24" Abrasive Sanding Belts



Abrasive Sanding Belts 3 x 120

Abrasive Sanding Belts 3 x 120



Abrasive Sanding Belts 3 x 132

Abrasive Sanding Belts 3 x 132

3" x 132" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with sanding belt tools and belt sanders.

In Stock - Ready to Ship:

See all 3" x 132" Sanding Belts



Abrasive Sanding Belts 3-1/2 x 15-1/2

Abrasive Sanding Belts 3-1/2 x 15-1/2

3½" x 15½" Abrasive Sanding Belts

3½" x 15½" Abrasive Sanding Belts In Stock - Ready to Ship!

See All 3½" x 15½" Abrasive Sanding Belts



Abrasive Sanding Belts 4 x 21

Abrasive Sanding Belts 4 x 21



Abrasive Sanding Belts 4 x 21-3/4

Abrasive Sanding Belts 4 x 21-3/4



Abrasive Sanding Belts 4 x 24

Abrasive Sanding Belts 4 x 24

4" x 24" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with sanding belt tools and belt sanders.

4" x 24" SANDING BELTS IN STOCK - READY TO SHIP!

See all 4" x 24" Sanding Belts



Abrasive Sanding Belts 4 x 36

Abrasive Sanding Belts 4 x 36



Abrasive Sanding Belts 4 x 54

Abrasive Sanding Belts 4 x 54



Abrasive Sanding Belts 4 x 79

Abrasive Sanding Belts 4 x 79



Abrasive Sanding Belts 4 x 90

Abrasive Sanding Belts 4 x 90



Abrasive Sanding Belts 4 x 118

Abrasive Sanding Belts 4 x 118



Abrasive Sanding Belts 4 x 132

Abrasive Sanding Belts 4 x 132



Abrasive Sanding Belts 4 x 168

Abrasive Sanding Belts 4 x 168



Abrasive Sanding Belts 6 x 48

Abrasive Sanding Belts 6 x 48

6" x 48" Abrasive Sanding Belts

Our brand of abrasive sanding belts are for use with sanding belt tools and belt sanders like Kalamazoo S6 Belt Sander.

IN STOCK - READY TO SHIP!

See all 6" x 48" Sanding Belts



Abrasive Sanding Belts 6 x 60

Abrasive Sanding Belts 6 x 60



Abrasive Sanding Belts 6 x 68

Abrasive Sanding Belts 6 x 68



Abrasive Sanding Belts 6 x 132

Abrasive Sanding Belts 6 x 132



Abrasive Sanding Belts 6 x 168

Abrasive Sanding Belts 6 x 168



Abrasive Sanding Belts 6 x 202

Abrasive Sanding Belts 6 x 202



Abrasive Sanding Belts 6 x 258

Abrasive Sanding Belts 6 x 258



Abrasive Sanding Belts 6 x 264

Abrasive Sanding Belts 6 x 264



Abrasive Sanding Belts 6 x 280

Abrasive Sanding Belts 6 x 280



Abrasive Sanding Belts 6 x 300

Abrasive Sanding Belts 6 x 300



Abrasive Sanding Belts 6 x 312

Abrasive Sanding Belts 6 x 312



Abrasive Sanding Belts 7 x 164

Abrasive Sanding Belts 7 x 164



Abrasive Sanding Belts 7 x 335

Abrasive Sanding Belts 7 x 335



Abrasive Sanding Belts 8 x 107

Abrasive Sanding Belts 8 x 107



Abrasive Sanding Belts 9 x 7-15/32

Abrasive Sanding Belts 9 x 7-15/32



Abrasive Sanding Belts 9 x 10-34/64

Abrasive Sanding Belts 9 x 10-34/64



Abrasive Sanding Belts 9 x 13-3/4

Abrasive Sanding Belts 9 x 13-3/4



Abrasive Sanding Belts 9 x 20

Abrasive Sanding Belts 9 x 20



Abrasive Sanding Belts 9 x 26-15/16

Abrasive Sanding Belts 9 x 26-15/16



Abrasive Sanding Belts 9 x 48

Abrasive Sanding Belts 9 x 48



Abrasive Sanding Belts 9 x 60

Abrasive Sanding Belts 9 x 60



Abrasive Sanding Belts 10 x 70-1/2

Abrasive Sanding Belts 10 x 70-1/2



Abrasive Wide Sanding Belts 14 x 86

Abrasive Wide Sanding Belts 14 x 86



Abrasive Wide Sanding Belts 14 x 107

Abrasive Wide Sanding Belts 14 x 107



Abrasive Wide Sanding Belts 14 x 113-1/4

Abrasive Wide Sanding Belts 14 x 113-1/4



Abrasive Wide Sanding Belts 15 x 127-1/2

Abrasive Wide Sanding Belts 15 x 127-1/2



Abrasive Wide Sanding Belts 18 x 48

Abrasive Wide Sanding Belts 18 x 48



Abrasive Wide Sanding Belts 18 x 85

Abrasive Wide Sanding Belts 18 x 85



Abrasive Wide Sanding Belts 19 x 48

Abrasive Wide Sanding Belts 19 x 48



Abrasive Wide Sanding Belts 24 x 55

Abrasive Wide Sanding Belts 24 x 55



Abrasive Wide Sanding Belts 24 x 75

Abrasive Wide Sanding Belts 24 x 75



Abrasive Wide Sanding Belts 25 x 48

Abrasive Wide Sanding Belts 25 x 48



Abrasive Wide Sanding Belts 25 x 55

Abrasive Wide Sanding Belts 25 x 55



Abrasive Wide Sanding Belts 25 x 60

Abrasive Wide Sanding Belts 25 x 60



Abrasive Wide Sanding Belts 25 x 72

Abrasive Wide Sanding Belts 25 x 72



Abrasive Wide Sanding Belts 25 x75

Abrasive Wide Sanding Belts 25 x75



Abrasive Wide Sanding Belts 30 x 103

Abrasive Wide Sanding Belts 30 x 103



Abrasive Wide Sanding Belts 36 x 60

Abrasive Wide Sanding Belts 36 x 60



Abrasive Wide Sanding Belts 36 x 75

Abrasive Wide Sanding Belts 36 x 75

36" x 75" Abrasive Sanding Belts



Abrasive Wide Sanding Belts 37 x 60

Abrasive Wide Sanding Belts 37 x 60



Abrasive Wide Sanding Belts 37 x 72

Abrasive Wide Sanding Belts 37 x 72



Abrasive Wide Sanding Belts 37 x 75

Abrasive Wide Sanding Belts 37 x 75

37" x 75" Abrasive Sanding Belts



Abrasive Wide Sanding Belts 43 x 75

Abrasive Wide Sanding Belts 43 x 75



Abrasive Wide Sanding Belts 50 x 75

Abrasive Wide Sanding Belts 50 x 75



Abrasive Wide Sanding Belts 50 x 103

Abrasive Wide Sanding Belts 50 x 103



Abrasive Wide Sanding Belts 52 x 75

Abrasive Wide Sanding Belts 52 x 75



Abrasive Sanding Belts 52 x 103

Abrasive Sanding Belts 52 x 103



Metabo Angle Grinders

Metabo Angle Grinders



Metabo Bench Grinders

Metabo Bench Grinders



Metabo Chop Saw Tool

Metabo Chop Saw Tool



Metabo Cordless Power Tools

Metabo Cordless Power Tools



Metabo Die Grinder Tools

Metabo Die Grinder Tools



Metabo Power Tool Drills

Metabo Power Tool Drills



Metabo Hammer Drill Tools

Metabo Hammer Drill Tools



Metabo Power Tool Heat Guns

Metabo Power Tool Heat Guns



Metabo Power Tool Jig Saw

Metabo Power Tool Jig Saw



Metabo Power Tool Paint Stripper

Metabo Power Tool Paint Stripper



Metabo Power Tool Polisher

Metabo Power Tool Polisher



Metabo Power Tool Rotary Hammers

Metabo Power Tool Rotary Hammers



Metabo Random Orbital Sanders

Metabo Random Orbital Sanders



Metabo Power Tools for Stainless Steel - INOX

Metabo Power Tools for Stainless Steel - INOX



Metabo Power Tool Wall Chasers

Metabo Power Tool Wall Chasers



Metabo Power Tool Wet Polisher

Metabo Power Tool Wet Polisher



Metabo Power Tool Concrete Surface Prep Kits - Grinding - Vacuum

Metabo Power Tool Concrete Surface Prep Kits - Grinding - Vacuum



Metabo 220 Volt 50-60 C/S Power Tools

Metabo 220 Volt 50-60 C/S Power Tools






Other Abrasives and Power Tool Manufacturers

*Click on a logo of your choice
Dynabrade
Dynabrade
Norton Abrasives
Norton Abrasives
Merit Abrasives
Merit Abrasives
Weiler Brush
Weiler Brush
Walter Abrasives
Walter Abrasives
Metabo Power Tools
Metabo Power Tools
Osborn Wire Brush
Osborn Wire Brush
Standard Abrasives
Standard Abrasives
Mirka Abrasives
Mirka Abrasives
CS Unitec
CS Unitec
Kalamazoo Industries
Kalamazoo Industries