  | *Click on a logo of your choice |  | *Click on a logo of your choice |
|
|
|
  | Product Catalog
|
Trim-Kut discs are made of premium aluminum oxide grains bonded to a special, durable polymer backing.This special backing enables the discs to be used without a backing pad. The aggressive grinding action in combination with the cool cutting results in a rapid stock removal for many different applications. Trim-Kut discs may be trimmed as needed to expose new grinding surfaces.
|
|
AA Abrasives flap discs are made with premium zirconia alumina grain for fast stock removal. They have a long life and stay sharp for 10-15 times longer than conventional fiber discs. They provide cooler grinding and finishing in one step. They have a low noise level and lightweight design. No back up pad is required for use on portable disc grinders and sanders. Very little surface pressure is needed. They are easy to use and cost effective. Made in USA.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
Gold PSA discs are individually stacked discs(not on a roll) with a peel and stick backing. Same heavy B & D weight found on our disc rolls, with a no-fil top coat to minimize loading. Each disc has a pull tab on the release liner for easy removal.
|
|
FilmBac PSA Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These individually tabbed discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
FilmBac Hook & Loop Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
1/4-20" shank allows for quick spin-on and spin-off mounting. Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
Unmounted flap wheels are perfect for delivering a consistent uniform finish on large pieces. They are designed for use on flexible shafts, slow speed straight or bench grinders. Safe maximum RPM ratings are indicated on each wheel.
|
|
Perfect for light removal and graining. Gives a consistent finish without loading up.
FOR USE WITH:
•WALTER LINEMATE #30-A-268 (5/8-11 THREAD)
•FEIN METAL FINISHER #WP012-27 (5/8-11 THREAD)
•DYNABRADE ELECTRIC DYNISHER #D13415 (5/8-11 THREAD)
•SUHNER UWK10-R 5" R/A GRINDER (5/8-11 THREAD)
•FLEX-LW1202S LOW SPEED POLISHER (5/8-11 THREAD)
•METABO SE12-115 W/341603950 EXTENSION, 316042950 SCREW AND 1411566230 WOOD DRIFT KEY ADAPTER (5/8-11 THREAD)
•DYNABRADE DYNISHER #D13450 (3/4" ARBOR)
•DYNABRADE DYNISHER #D13400 (3/4" ARBOR)
•CS UNITEC-PTX ECO SMART LINEAR GRINDING SYSTEM (OLD STYLE) (3/4" ARBOR KEYWAY)
•SUHNER UPK4-R R/A POLISHER (3/4" ARBOR KEYWAY)
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending.
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending. They are securely and uniformly wound to create a balanced tool with a true center. They are perfect for finishing jobs with channels, irregular contours and angles. They are economical and fast cutting.
|
|
No Lap Bands are made with aluminum oxide grain and resin bonded. They are perfect for finishing curved and contoured surfaces. For use with expanding rubber drum.
|
|
Sharp, fast clean - aluminum oxide grain cutting abrasive material used for polishing, finishing, sanding, deburring and other maintenance associated with tool and welding shops. Flexible cloth backing allows you to tear to the desired length. Excellent for contour work, and turning parts in lathes. Each roll is in a durable cardboard box. Easy to dispense material and convenient to store.
|
|
Aluminum oxide cloth sheets are excellent for general clean up on metal and wood surfaces. They outlast paper sheets 4 to 1. They have a flexible durable backing and are water resistant.
|
|
Emery cloth sheets are close coat construction and are made of emery grain. They have a cloth backing which is very flexible. They are excellent for cleaning and polishing metal surfaces. They are also used on wood.
|
|
Crocus cloth sheets are made of a natural mineral used for extremely fine finishing and polishing on metals, plastics and woods. They have a flexible cloth backing.
|
|
Silicon carbide waterproof paper is best for wet and dry sanding of metal, paints and plastics. It leaves an excellent finish on most precious metals. It has a long life and is economical.
|
|
Silicon carbide stearate coated paper sheets reduce loading of material and are excellent on wood, plastics and metals.
|
|
Garnet finishing & cabinet paper leaves an excellent finish on woods. It has a medium aggressiveness. It has
a long life and is economical.
|
|
Aluminum oxide and cabinet paper is excellent for wood sanding. It is aggressive and economical.
|
|
Silicon carbide screen cloth is excellent on plaster or speckle. It reduces loading of material and can be used wet or dry. For use on copper tubing and non-ferrous metals.
|
|
Aluminum oxide belts are resin bonded, and have tear and break resistant joints. They are excellent on all metals and hard woods. They are also available for soft woods.
Aluminum oxide Y-Wt open coat poly/cotton material have a specially coated backing which provides high performance for washable belts. The high rigidity retention resists softening wash after wash. They are great for hard and soft woods and soft metals.
Aluminum oxide J-Wt premium cotton belts are flexible enough for most contour surfaces. They are made of egyption cotton which allows the belt to last longer. The premium heat treated grain allows sharper cutting and more consistent finishes. Great on non-ferrous metals,such as aluminum and brass, hard woods, and plastics.
Aluminum oxide J-Wt plus belts are made of 100% egyption cotton and have a grinding aid which not only cools, but acts as an anti-clogging agent. J-Flex belts will conform to highty contoured surfaces and provide superior finishing and polishing. They are excellent for chrome, stainless steel, brass, titanium, bronze and hard woods.
Silicon carbide waterproof Y-Wt polyester belts are designed for the heavy duty, more abusive applications. They are 100% waterproof and are sharp cutting. They are used on non-ferrous metals, marble, plastic, glass, rubber and fiberglass.
Zirconia alumina belts are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
Zirconia alumina plus belts have a grinding aid for a cooler cut and faster stock removal on stainless steel. They are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
|
|
AA Abrasives offers a full line of floor sanding and finishing products. They are made of the highest quality grains and strongest backings in the industry. Our floor products resist loading and tearing. We offer items for most manufacturers of floor machines at great savings. Click above For:
Floor Rolls
Floor Paper discs
Floor Sheets
Floor Screen Discs
Sanding Belts for Floor Machines
|
|
AA Abrasives Hand Pads are extremely comformable and are an excellent alternative to steel wool. They are non-rusting and non-loading, and are excellent with solvents. They provide a uniform, clean finish and are perfect for blending grains. They are excellent on all types of metal and are defuzzing on wood products. They are reusable and color coded.
|
|
AA Abrasives non-woven rolls are helpful when longer lengths are required for your manual or machine operations. Excellent cost effective alternative to hand pads.
|
|
Premium surface conditioning material for surface preparation. Available in three different grits for blending, deburring and cleaning. For steel and stainless steel.
|
|
AA Abrasives Premium Unitized Wheels designed specifically for right angle grinders have a strong fiberglass backing so no back up pads are required. Applications Include: Deburring, Cleaning, Surface Blending, Finishing and Polishing a wide range of parts and materials. Great on all Metals, (Stainless Steel, Titanium, Aluminum, and Alloys), Plastics and Composite.
Specifications:
2SF- Medium Density Silicon Carbide Fine. Very Conformable, Nice Final Finish on all Materials.
3SF- Hard Density Silicon Carbide Fine. Longer Life, Slight Stock Removal with Strong Edge Durability Leaves a Fine Finish. Very good on Stainless Steel.
6AM- Hard Density Aluminum Oxide Medium. Coarser Grit with Stock Removal and High Cut Rate. Long Life and very Strong edge. Great on Stainless and other Metals.
|
|
AA Abrasives Premium Surface Preperation Wheels designed specifically for right angle grinders have a durable Plastic backing so no back up pads are required. Applications Include: Lite Deburring, Cleaning, Surface Blending, Finishing, Polishing and paint removal on a wide range of parts and materials. Great on all Metals, (Stainless Steel, Titanium, Aluminum, and Alloys), Plastics and Composite.
Specifications:
AFine- Soft Density Aluminum Oxide Fine, Very Conformable-Soft. Nice Final Finish On All Metals
S/CFine- Soft Density Silicon Carbide Fine, Very Conformable-Soft. Nice Final Finish On All Metals
|
|
|
|
|
|
AA Abrasives Strip-It products, (Lava Wheels), are made of abrasive grains and resins which are bonded to a strong nylon filament, which resemble black lava. They are recommended for aggressive mechanical cleaning operations. The pourous structure of this product allows for reduced loading and a cooler cut. They are excellent for providing consistent surface finishes. Applications include but are not limited to metal working, fiberglass, plastic, automotive, marine, and cleaning of cement and stone.
|
|
|
|
Rex-Cut cotton reinforced wheels are designed to be used for a variety of applications where metal removal and a nice finish is required. Their special bond differs from conventional bonded abrasives which enables them to grind and finish metals at the same time.
GFX Bond
GFX bond is designed for fine finishing, blending and polishing applications on ferrous and non-ferrous metals. GFX bond is resilient for use on contours and resists loading. These wheels are ideal for stainless steel applications.
MTX Bond
MTX Bond is designed for light or medium weld removal. MTX bond is resilient for use on contours and flat surfaces. User can easily control cutting rates by amount of pressure applied. They resist loading and offer excellent finishes for grinding aluminum and other ferrous materials. They are excellent on aluminum.
|
|
|
|
AA-Flex wheels offer one step grinding and finishing. They are constructed of aluminum oxide grains bonded to a strong, slightly flexible fiberglass reinforcing and have dimples on the grinding surface. AA-Flex wheels will remove stock much like a resin bond depressed center wheel and finish like a resin fiber disc. Excellent on stainless steel and aluminum.
|
|
AA Abrasives Premium Aluminum Oxide Threaded Plug and Tapered Wheels are resin bonded. A16R and A20R grains are designed for tougher metals where consistent stock removal and wheel life is important. Designed for hard to reach areas. A16R and A20R grains are our most popular sellers. Designed for high RPM grinders. Made in USA.
|
|
AA Abrasives resin bonded mounted points are made of premium aluminum oxide and designed for a high RPM die grinders. They are excellent for weld removal on hard to reach areas on metal and stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
The shape of the wheel is determined by the shape, size, and accessibility of the part to be ground. When grinding peripheral cutters, cup wheels are used. Dish wheels are best for formed cutters.
WA White Premium Aluminum Oxide
Used when a good cutting action is needed on all steels. When a sharp corner or radius must be held, use fine grits combined with J 0r K hardness.
GC Green Silicon Carbide
Used for non-ferrous metals such as cemented materials.
AS3 Ceramic
Our AS3 wheels feature a 30% advanced Cubitron 321 ceramic content combined with a 20% premium pink aluminum oxide grain and 50% white aluminum oxide grain that delivers cooler cuts on harder surfaces for maximum performance and life. This unique combination continually fractures, producing sharp new grinding points. Best used when heavy stock removal is necessary. Ceramic wheels are designed to grind without burn and hold form much better. They are excellent for corner and form holding applications. They exceed standard wheels when grinding materials 50 Rockenell C and harder. They're ideal for hardened tool steels, sprayed metal coatings, Iconel, Waspalloy, Hastalloy, Stellite and other high-temp alloys. In tool room applications, the AS3 will yield better results in dry grinding than conventional abrasives. They allow heavier downfeeds and faster traverse rates. Dressing is only required to restore the shape of the wheel. ISO 9002 certified quality.
|
|
AA Abrasives vitrified mounted points are made from premium pink aluminum oxide grain for fast cutting and clean finishing. They are precise dimensions, balanced and securely mounted to 1/4" or 1/8" steel shanks. Applications include deburring, tool sharpening, finishing cavities and removing mold marks and parting lines. In stock.
|
|
AA Abrasives brand wire wheels are manufactured with state of the art technology and materials. They are quality tested and out perform most major brand name wire wheels. They are an excellent option for the cost conscience consumer who isn't willing to sacrifice quality. Most heavy duty manufacturers stay with our brand after evaluating their cost per piece count.
|
|
All carbide burrs have a 1/4" shank. All burrs with a 1/4" diameter and under are solid carbide, all burrs over 1/4"" diameter have hardened steel shanks. A super cut is standard on all burrs. Resharpening and extra long shanks are available. All burrs provide an accurate and precise cut.
|
|
Our backing pad is specially designed to allow air flow behind the sanding disc, substantially increasing the life of the disc. Note: Thread sized for backing pads and disc nuts are available on special orders. Please specify model number and machine make on which accessories are to be used.
|
|
Our disc holders are constructed of soft flexible rubber. This allows for flex and consistency when needed without digging or deforming.
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with 3M Roloc System
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with Norton Speed-Lok System
|
|
Hook & Loop disc holder have a tight loop grip surface engineered specifically for paper sanding discs. They are easy to use, quick changing, and excellent on flat and contour surfaces.
|
|
Adapter shanks for 1/4-20 threaded mandrels are made of hardened steel and are reusable. They extend shank length wear.
|
|
For use with AA Abrasives Cartridge Rolls, hardened steel with plated finish. All mandrels have a 1/4" shank. Designed for high speed drills and die grinders. Made in USA.
|
|
For use with AA Abrasives No Lap Bands. Speed balanced for high performance. Made from 60 durometer live rubber which enhances controlled expansion. Designed for high speed drills and die grinders. Made in USA.
|
|
Hook & Loop style back up pads have a loose loop grip surface engineered specifically for surface conditioning discs. They are easy to use and quick changing. They are excellent on flat and contour surfaces.
|
|
AA Abrasives reusable adapter assemblies can be used for 7" and 9" type 27 or type 28 depressed center wheels. They have a 5/8-11 thread and heavy duty construction. They are simple to use and cost effective.
|
|
Mandrels are designed for wheel widths up to 1/4". The body and screw head have a 3/4" diameter. The overall length is 2-1/2".
|
|
Type-R back up pads are interchangeable with 3M Roloc System. They operate at a high RPM and are ideal for die grinders and flexible shafts. They have a tough 1/4" steel shank.
|
|
Dynabrade Dynafiles (I, II, III), Dynabrade Mini-Dynafile, Dynabrade Electric Dynafile, Dynabrade Dynabelter, Dynabrade Dynangle
|
|
Dynabrade Buffer, Dynabrade Buffer/Polisher, Dynabrade Buffer/Sander, Dynabrade Sander/Polisher, Dynabrade Gear-Driven Orbital Sander, Dynabrade Wet Orbital Sander
|
|
Dynabrade Mini Dynishers, Dynabrade Dynishers, Dynabrade Dyingers, Dynabrade Dynafines, Dynabrade Dynastraights, Dynabrade Lightweight Dynastraights, Dynabrade Slow-Speed Dynastraights, Dynabrade Extension Dynastraights, Dynabrade Industrial DynaZip, Dynabrade DynaRover
|
|
Dynabrade Drills, Dynabrade Routers, Dynabrade Cut-Off Tools, Dynabrade Descaling Tools, Dynabrade Reciprocating Tools
|
|
Dynabrade Pencil Die Grinders, Dynabrade Versatility Grinders, Dynabrade Die Grinders, Dynabrade Straight & Right Angle Collet Die Grinders, Dynabrade Extension Die Grinders, Dynabrade Center Wheel Grinders, Dynabrade Cone or Plug Wheel Grinders, Dynabrade Type 1 Wheel Grinders, Dynabrade Slow-Speed Collet Die Grinders
|
|
Dynabrade Mini-Dynaorbitals, Dynabrade 3" Random Orbitals, Dynabrade 3-1/2" Random Orbitals, Dynabrade 5" Random Orbitals, Dynabrade 6" Random Orbitals, Dynabrade 11" Random Orbitals, Dynabrade Two-Hand Random Orbitals, Dynabrade 1-1/4" Random OrbitalS
|
|
Dynabrade 2"-3" Disc Sanders, Dynabrade Dynalines, Dynabrade Dynabug Model T Sanders, Dynabrade 4"-7" Disc Sanders, Dynabrade Gear Driven Orbital Sanders, Dynabrade Dual Action Sanders, Dynabrade File Board, Dynabrade Dynabug II
|
|
Dynabrade Tool Post Grinders, Dynabrade Band Saw Blade Grinder, Dynabrade Versatility Grinders
|
|
Dynabrade Vacuums, Dynabrade Downdraft Tables
|
|
Dynabrade 3-1/2", 5" and 6",
Vacuum and Non-vacuum
|
|
Dynabrade Premium Random Orbital Disc Pads, Dynabrade Value Random Orbital Disc Pads, Dynabrade Random Orbital Disc Pads, Dynabrade Random Orbital Disc Channel-Vac Pads, Dynabrade 5", 6", & 8" Gear-Driven Orbital Sanding Pads, Dynabrade Mini-Dynaorbital Disc Pads, Dynabrade Dynaline/Dynabug Sanding Pads, Dynabrade Dynabug "Model T" Sander Pads, Dynabrade Dynabug II Sanding Pads, Dynabrade Interface Pads, Dynabrade Pad Conversions, Dynabrade Dynapad Locking-Type Sanding Pads, Dynabrade Dynafine Detail Sanding Pads, Dynabrade Dynafine Finger Sander Platen Pads, Dynabrade 2"-4" Diameter Disc Pads, Dynabrade Wet/Dry Disc Pads, Dynabrade Polishing Pads, Dynabrade Cotton Buff Wheels,
Dynabrade Platen Pads, Dynabrade Dynacushion Pneumatic Wheels, Dynabrade DyanWheels, Dynabrade Dynaflex Expander Wheels, Dynabrade Dyanswivel Air-Line Connectors & Composite-Style Couplers, Dynabrade Contact Wheels & Assemblies, Dynabrade Dynuba Products, Dynabrade Leveling Jacks
|
|
For Dynabrade Dynafile, Dynabrade Dynafile II, Dynabrade Mini-Dynafile II, Dynabrade Dynafile III and Dynabrade Dynabelter Contact Arm Assemblies
|
|
Norton Abrasives - Norton Bonded abrasive and grinding wheels will meet all your rough and precision application needs –
from aggressive zirconia alumina snagging wheels, to precision metallurgical cut-off wheels, to premium ceramic toolroom wheels – with grinding wheels, depressed center wheels, cut-off wheels, snagging wheels, segments, mounted points, cones and plugs. Buy Norton Abrasives - Norton Bonded Abrasives when you require the highest performance abrasives available to the industrial manufacturing community.
|
|
Norton Abrasives - Norton Wire Brush offering includes all the basic shapes and configurations: cups, saucer cups, wheels, end brushes and hand brushes – in standard and full cable twist knot, crimped and stringer bead designs. Buy Norton Abrasives - Norton Wire Brushes when you require the highest performance abrasives available to heavy duty manufacturers.
|
|
Norton Abrasives complete line of Norton Sharpening and Finishing Stones delivers the superior performance you want. Norton is the leading supplier of benchstones, files, slips and rubbing bricks. Buy Norton Abrasives - Norton Sharpening Stones and abrasive hand tools when you require the highest performance abrasives available to tool and die shops.
|
|
Norton Abrasives - Norton Coated Abrasive products encompass a wide range of sanding belts, discs, rolls, sheets, abrasive sponges and flap wheels for all your MRO and production needs: stock removal, dimensioning, grinding, deburring, cleaning, blending, polishing and finishing. Buy Norton Abrasives - Norton Coated Abrasives when you require the highest performance abrasives available to industrial fabricators.
|
|
Norton Abrasives - Surface Finishing products are made of a non-woven nylon web impregnated with abrasive grain and resin. A large assortment of abrasives, grit sizes and backing materials give the user an extensive and superior product offering. Typical applications include light- to heavy-duty cleaning, deburring, blending, polishing and finishing. Buy Norton Abrasives - Surface Finishing products when you require the highest performance abrasives available to metal fab shops.
|
|
Norton Abrasives - Norton Superabrasive (Diamond and CBN) line includes resin, vitrified, metal and MSL wheels/blades, stationary and rotary truing and dressing tools; electroplated products, and lapping compound to meet the demands of precise applications including more toolroom, CNC, saw grinding, and made-to-order wheels. Buy Norton Abrasives - Norton Superabrasives when you require the highest performance abrasives available to precision manufacturers.
|
|
Merit Abrasives - Coated Abrasives product line encompasses a complete range of belts, discs, rolls, sheets and flap wheels for all your MRO and production needs, such as stock removal, dimensioning, grinding, deburring, cleaning, blending, polishing and finishing.
|
|
Merit Abrasives - Merit Non-woven Surface Finishing products have the versatility to tackle any job, whether you need to clean and remove imperfections on metal surfaces, clean built-up residue, deburr or finish a variety of surfaces, blend weld seams or create decorative finishes.
|
|
Use with a holder on blind, threaded holes.
|
|
Polishing narrow areas with abrasive of buffing compound.
|
|
Holder enables reverse rotation of brush.
|
|
Provide more flexibility than a knot wire brush for aggressive cleaning action in corners.
|
|
Maximum aggression for cleaning in corners.
|
|
General purpose applications. Can be mounted in multiples.
|
|
For cleaning and deburring off-hand or on a drill press.
|
|
Narrow Face Crimped Wire Wheels for light-duty brushing action.
Wide Face Crimped Wire Wheels cover a broader surface area.
|
|
Nylon is resistant to most chemicals and displays excellent bend recovery.
|
|
For light to medium duty, general purpose cleaning of large surfaces.
|
|
Untreated Tampico has excellent liquid retention and is highly resistant to heat, solvents and chemicals.
|
|
Maximum impact for extremely severe applications.
|
|
The banded design on the double row knot brush provides maximum aggression.
|
|
For aggressive action in severe applications.
|
|
Use with power tools for heavy-duty cleaning and deburring.
|
|
For light duty, general purpose applications.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
Banded brushes provide shorter trim for maximum aggression.
|
|
Accommodates the natural working angle; for broad range of surfaces and contours.
|
|
Banded brushes provide shorter trim length which prevents flaring and provides more aggressive brushing action.
|
|
3/8" Trim Length - For rivet-hole cleaning operations in aircraft and aerospace industries.
|
|
For cup or wheel brushes.
|
|
Constructed for superior performance and high aggression in demanding applications. For automatic and semi-automatic equipment, Ideal for gear deburring.
|
|
For light cleaning and deburring.
|
|
Nylon is resistant to most chemicals and displays excellent bend recovery.
|
|
Silicon Carbide. Used to maximize brush conformability on irregular part shapes.
|
|
A lower price, commercial grade brush for general purpose applications.
|
|
A lower price, commercial grade brush for general purpose applications.
|
|
Used for centering 10", 12" and 14" Nylox Wheels when gang mounting.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Black Elastomer* - Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Light-duty brushes for cleaning in small holes and confined areas.
|
|
Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Black Elastomer* - Estra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life. For hot pass through cap pass weld cleaning.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maxiumum aggression and long life.
|
|
Burgundy Elastomer* (Standard). Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
For brushing joints or cleaning cracks in concrete and asphalt; preparing expansion joints for filing and sealing. Used on walk-behind machines.
|
|
For line traveling machines.
|
|
Use fully chucked on smooth of threaded blind holes.
|
|
For cleaning hole sides and bottom in a single step.
|
|
General Duty. For fast, efficient cleaning of large surfaces.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
For hard-to-reach areas; primarily for weld cleaning
|
|
Eye Handle - Use for manual cleaning applications.
|
|
Maximum wire density and aggression, covers more surface area in a single pass.
|
|
Greater fill density and more aggressive brushing action. Can be mounted in multiples.
|
|
Flexible brushing action. Can be mounted in multiples.
|
|
Flexible brushing action.
|
|
General purpose brushes for use on grinding equipment requiring a narrow face width.
|
|
Silicate filament for ultra-fien deburring and cleaning of small internal holes.
|
|
Untreated Tampico has excellent liquid retention and is highly resistant to heat, solvents and chemicals.
|
|
For general purpose applications on large surface areas.
|
|
Single Stem, Single Spiral, with Handle
|
|
Ideal for external pipe cleaning. For automatic and semi-automatic equipment.
|
|
Ideal for producing antique or fien satin finishes on precious and non-ferrous metals.
|
|
Covers more surface area in a single pass
|
|
For 6" & 8" Brushes. Used in pairs & priced per pair.
|
|
Used on descaling equipment.
|
|
Protects the work surface from being scratched or marked.
|
|
Ideal for light cleaning on relatively large areas.
|
|
Polishing relatively large areas with abrasive or buffing compounds.
|
|
Ideal for light cleaning and deburring in confined areas.
|
|
Ideal for polishing in confined areas.
|
|
Plastic ferrule protects molds and dies during interior polishing.
|
|
Ideal for deburring and finishing in confined areas.
|
|
Loop Handle, Straight Black Nylon Fill
|
|
Straight White Nylon Fill
|
|
Used to maximize deburring action and minimize cycle time.
|
|
Prevents smearing. Improves the finish. Lowes costs.
|
|
Standard 3/4" Diameter Shaft, 2" Long
|
|
Includes drive arbor, set screw and hex key.
|
|
Used on the ends of a gang mount. Used in pairs and priced per pair.
|
|
Mounts Weiler disc brushes to any type of milling machine or CNC machine.
|
|
Maximum aggression and long life.
|
|
Smooth grinding action and long life.
|
|
For use with Tiger, Vortec Pro and High Density Flap Discs.
|
|
High cut rate at a value price.
|
|
Increased conformability and maximum life.
|
|
60 Grit: For maximum cut rate
80 Grit: For superior finish
|
|
Zirconium Grain - Plastic Backing
|
|
For mounting 2" & 3" BobCats on tools with 1/4" collets
|
|
Convenient hang-card makes increasing poin-of-purchase sales easy!
|
|
Compatible with Norton Speed-Lok TS back-up pads.
|
|
Compatible with 3M Roloc back-up pads.
|
|
A premium line designed to provide long life. Ideal for medium to high production environments.
|
|
A price line designed to provide fast cutting action. Ideal for low to medium production environments.
|
|
Used in pairs and priced per pair.
|
|
One roll per box.
|
|
For rough grinding applications on various metals.
|
|
For root pass grinding, light grinding and cutting.
|
|
For fast, burr-free cutting of various metals.
|
|
For a wide range of metal-cutting applications.
|
|
For electric or air die grinders and angle grinders.
|
|
For electric or air die grinders.
|
|
For 1"-3" Type 1 Wheels only
|
|
For toolroom and machine shop use
|
|
For circular saws
|
|
For stationary machines
|
|
For portable gas or electric saws
|
|
For low horsepower chop saws
|
|
Series 2 - Cleaning & Finishing - Hardness: Soft
Series 3 - General Purpose - Hardness: Medium
Series 6 - Deburring - Hardness: Medium/Hard
Series 8 - HD Deburring & Polishing - Hardness: Hard (Heavy-Duty)
|
|
For Unitized Wheels
|
|
MRO/General Purpose - For general cleaning and finishing
Deburring Wheels - For deburring and edge blending
|
|
For Convolute Wheels
|
|
Compatible with 3M Roloc back-up pads.
|
|
Aluminum Oxide
|
|
Hardwood Block
Heavy-duty brace included with all brooms.
|
|
Synthetic Foam Block
|
|
Synthetic Foam Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Lacquered Hardwood Block
|
|
Economy brushed provide lasting, efficient service at minimal cost.
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushed provide lasting, efficient service at minimal cost.
|
|
For applying blacktop driveway and parking lot dressings, asphalt, sealers or roof coatings.
|
|
Hardwood Block
Wide flared ends for sweeping close to curbs and walls.
|
|
Hardwood Block
For sweeping or scrubbing concrete or stone floors, driveways, etc. Ideal for sweeping heavy chips and debris.
|
|
Quality hardwood handles with clear lacquer finish.
|
|
Reinforced, heavy-duty metal handles are available in two colors and optional foam cover.
|
|
Use telescoping handles to shorten or extend the reach of the handle. Use fountain tube handles when a continuous flow of water is needed, i.e. car/truck washing.
|
|
Featuring the honeycomb core.
Fiberglass handles are stronger than wood or metal. Virtually indestructible.
|
|
Angled trim allows access to corners, under low cabinets and other hard-to-reach areas.
|
|
Metal top for added durability. Ideal for wet or dry applications.
|
|
For light-duty spot sweeping.
|
|
For fast, efficient clean-up.
|
|
24" Overall Length
Ideal for cleaning radiators and narrow, hard-to-reach places.
|
|
For dusting ceilings, valances, high moldings and other hard-to-reach places. Twisted-in-wire construction with plastic handle.
|
|
Heavy-duty construction, iron handle socket.
|
|
Rust-proof handle socket and frame.
|
|
Two tapered handle holes
|
|
Protective bumper - Foam block with two handle holes.
|
|
Easily sweeps between school bus seats.
Lacquered hardwood block with one threaded handle hole.
|
|
The bi-level design allows the brush to stay in contact with the surface.
|
|
Wet & dry cleaning, prespotting, carpet touch-up, etc.
Shaped plastic handle.
|
|
For use in confined spaces
|
|
Foam block
|
|
Heavily filled for heavy-duty scrubbing
|
|
Excellent for scrubbing decks or floors. One threaded and one tapered handle hole.
|
|
For general scrubbing in factories, kitchens, institutions, etc.
|
|
Chemical and water resistant, will not warp or crack.
|
|
Designed for high temperature cleaning, ideal for food service.
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Use for removing stubborn dirt, grime and mildew from tiled surfaces.
|
|
2" Trim Length
|
|
Hardwood handle
|
|
For valves, outlets, small tanks, beverage dispensers & coffee urns.
|
|
Industrial Grade
Hardwood handle with plated metal heads
|
|
Tie-on style, 4-ply cotton
|
|
Heavy-duty clamp-on style
|
|
Tie-on style, 4-ply cotton
|
|
Industrial grade
Mop head securely tied to handle.
|
|
One piece construction that will not rust, fade, crack, peel, chip, dent or warp. Wringer fits all sizes of plastic or metal buckets.
|
|
100% lambswool
Washes easily and dries quickly. Pads are easily changed.
|
|
For application of roof coatings.
|
|
For application of roof coatings.
|
|
Useful tools for applying cement, waterpaints and liquid waterproofing materials on masonry walls. Handle attached.
|
|
Two tapered handle holes allow user to choose the correct brush angle needed.
|
|
Detachable handle
For the application of Kalsomine, cold water, acid and water repellents to concrete and othe rough surfaces.
|
|
Hardwook block. Tapered handle hole.
|
|
Hardwood block. Ideal for creating texture to newly pured cement and for applying coatings on asphalt or concrete.
|
|
For texturing wall surfaces and ceilings. Lacquered heavy-duty wood block with one threaded handle hole.
|
|
Hardwood block. For smoothing wallpaper.
|
|
Hardwood blocks
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Hardwood blocks
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
.012 Steel Wire
|
|
.012 Steel Wire
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Hardwood block
For general cleaning in the plating, metal finishing, aircraft and missile industries. Also used with inert arc aluminum welding.
|
|
For rugged cleaning on bricks, stone and similar large flat areas.
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
For cleaning concrete forms and green concrete after forms have been removed.
|
|
A refill brush for most chipping hammers. Used for weld cleaning.
|
|
For cleaning chips, borings, solder, rust, dirt & corrosion from castings.
|
|
Waxed hardwood block
Use for file cleaning or to roughen and prepare surface material prior to sweating and soldering.
|
|
Small stiff wire brush for brushing hot metal. Can be exposed to flames without burning.
|
|
Filled with .012 round wire and fitted with 1/4" x 2" NPT pipe nipple. For internal cleaning of pipes and flues.
|
|
Wire fill
For internal cleaning and deburring of copper tube fittings. Also used in trucking and marine industries as a light socket cleaning brush.
|
|
One brush replaces 4! Steel wire. Cleans the outside and inside diameters of 1/2" and 3/4" tubes and fittings. Use for soldering prep, deburring, drill hole cleaning and cleaning battery terminals.
|
|
Stainless steel ferrule - Heavily filled
|
|
Steel ferrule.
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Seamless nickel ferrule. Pointed tip - Round black handle.
|
|
Long, lacquered handle.
|
|
Ox hair - Single stroke - Round black handle.
|
|
Ox hair - Flat red handle.
|
|
Black china bristle - Chiseled edge - Clear lacquered handle.
|
|
Seamless aluminum ferrule. Camel hair - Round black handle.
|
|
Grey china bristle - Steel ferrule - Long foam handle.
|
|
Horsehair - Tin ferrule.
|
|
Stiff grey horsehair. Aluminum tube with cork to hold cleaning fluid. For cleaning electrical contact points.
|
|
China bristle - Seamless steel ferrule - Lacquered wood handle.
|
|
With hanger for coating applications in drilling operations.
|
|
For coating applications in pipeline construction.
|
|
Poly blend with phenolic core.
|
|
Poly blend with PVC core.
|
|
Poly blend with treated paper core.
|
|
Can be used with all paints. Ideal for trim and touch-up.
|
|
All metal with two plastic caps. Solid plastic handle with threaded grip.
|
|
Permits use of paint roller directly from a 5-gallon pail.
|
|
Can be used with all types of paint. Use on pipes, rails, fences and hard to reach areas.
|
|
Walter Abrasives - Walter Allsteel - Versatile Performance Grinding wheels are designed to deliver top performance when working on both steel and stainless steel. They incorporate the latest developments in grain and bonding technology to lower your grinding costs.
|
|
Walter Abrasives - Walter Aluminum - High Performance Grinding and Cutting in Soft Metals wheels meet all the requirements for grinding and cutting of aluminnm and other non-ferrous metals.
|
|
Walter Abrasives - Walter Bench Grinding Wheels are for general purpose grinding work on bench and pedestal grinders. They are available in a variety of grits - 24 and 36 for fast and rough grinding - 46 of intermediate requirements - 60 and 80 for finer finish work. All wheels are supplied with a set of nested reducer bushings t fit 1", 3/4", 5/8" and 1/2" shafts.
|
|
Walter Abrasives - Walter Big Buff III - Polisher/Sander has been designed specifically to integrate with unique Quick-Step products to offer you the most versatile metal surface finishing system available today.
|
|
Walter Abrasives - Walter Blendex Non-Woven Abrasives are made from non-woven industrial grade nylon impregnated throughout with abrasive grain and bonded with heavy duty resin. This material conforms to the workpiece and is ideal for cleaning, blending and final finishing.
|
|
Walter Abrasives - Walter Carbide Burrs are made from first grade tungsten carbide and are manufactured with the highest degree of accuracy for perfect concentricity and balance. They offer fast material removal and longest life.
|
|
Walter Abrasives - Walter Carbide Core Cut annular cutters are designed for increased performance and longer life. They cut through tough or abrasive materials where HSS cutters do not perform or last. In mild steel, they cut many more holes than their HSS counterparts.
|
|
Walter Abrasives - Walter Chopcut - High Performance Cutting with Portable Chop Saw wheels have been specifically developed for use on portable abrasive chop saws. Their formulation allows fast cutting with minimal load on the motor. They are therefore easy on the operator as well as on the saw.
|
|
Walter Abrasives - Walter Coasted Abrasive Belts offer and assortment of portable file belts for general purpose sanding, light weld removal, surface cleaning, blending, deburring and finishing of intricate shapes and profiles. An extra heavy-duty backing (Y-polyester) with a special butt-joint and glue ensured longest belt life even in the most demanding applications.
|
|
Walter Abrasives - Walter Concrete - High Performance Grinding and Cutting wheels are specially formulated for grinding and cutting all types of concrete, cast iron, stone and other building materials.
|
|
Walter Abrasives - Walter Coolcut Flap Wheels are excellent for weld blending and general finishing work. All 6-1/2" wheels are mounted with a pair of flanges for use on straight shaft or bench grinders.
|
|
Walter Abrasives - Walter Coolcut Shop Rolls & Sheets are made from fast cutting aluminum oxide abrasive grain that is resin bonded onto a high quality cotton cloth backing for cool, effective cutting and maximum resistance to wear. For general purpose sanding, light removal and deburring, surface cleaning and finishing.
|
|
Walter Abrasives - Walter Cup Wheels are widely used for rough grinding or snagging work. They are supplied with a deeply anchored wrap-around steel hub for maximum saftely and long life, and a 5/8-11 threaded arbor for spin-on mounting.
|
|
Walter Abrasives - Walter Double-X - Premium performance Grinding wheels incorporate the very latest advances in abrasive grain, bonding and manufacturing technology. When all costs are considered, Double-X is the wheel that grinds at the lowest cost.
|
|
Walter Abrasives - Walter Enduro-Flex One Step Finishing Discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces daily. A new, ultra sharp and refined zirconium grain stays sharper longer to remove more material faster. A special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish.
|
|
Walter Abrasives - Walter Flexcut - Premium Performance Flexible Grinding Wheels are especially formulated to deliver superior performance on all ferrous and non-ferrous metals.
|
|
Walter Abrasives - Walter FX Cleaning Abrasives are made of high density, extra-firm non-woven synthetic webbing impregnated with abrasive grain. The open structure assures cool operation and resists loading even when used on soft metals. They are most effective for cleaning metal surfaces, like removing paint, coatings, burn marks, rust, scale, gaskets and similar applications.
|
|
Walter Abrasives - Walter HP - High Performance Grinding and Cutting Wheels are formulated to give highest productivity, safety and operator comfort on all types of grinders - air grinders, electric grinders/sanders and portable high speed angle grinders. Exceptional performance in grinding down welds, preparing weld edges, deburring, shaping, cleaning and cutting.
|
|
Walter Abrasives - Walter Line Finishing Abrasives offer a complete range of innovative abrasives designed to match any line finish and reduce finishing costs. Whether working in stainless steel, steel, aluminum, brass, copper or other alloys, applying a line finish is done quickly and with little effort.
|
|
Walter Abrasives - Walter Line-Mate III Drum Sander surface finishing system is the most versatile method for all applications where a linear scratch patter is required.
|
|
Walter Abrasives - Walter Mounted Points are made from the finest grades of abrasive grain. Their shafts are precisely centered and every point is dressed for perfect balance without run-out or vibration. 1/4" shaft.
|
|
Walter Abrasives - Walter Mounted Wire Brushes - For Die Grinders are made from the highest industrial quality wire with optimum density for fast material removal and longest life. They are perfectly balanced for vibration free running. Shafts must be fully inserted into the collet and firmly secured. 1/4" shaft.
|
|
Walter Abrasives - Walter Pipefitter - Outstanding Performance in Pipeline Construction wheels are specially formulated and reinforced for grinding joint welds between passes in pipeline construction and pipe fabrication. They do not contain iron. sulfur or chlorine(Fe, S, CI) and will not contaminate stainless steel.
|
|
Walter Abrasives - Walter Plug and Cones are resin bonded and formulated for maximum material removal and longest life. Very popular in foundries, steel mills and fabricating shops for heavy stock removal in hard to reach areas. All have an internal threaded arbor for direct mounting.
|
|
Walter Abrasives - Walter Poli-Quick Dry Polishing Pads are made from open-mesh polyamide netting coated with precision graded abrasive grain bonded to open-cell foam with a woven backing. They can be used wet or dry for hand or machine polishing, cleaning and finishing applications.
|
|
Walter Abrasives - Walter Portacut - High Speed Cutting with Gas and Electric Power Saws wheels are the most reliable cut-off wheels for all on-site cutting jobs with portable gas and electric power saws. They are specially reinforced for added safety and formulated for an optimal cutting speed and wheel life ratio.
|
|
Walter Abrasives - Walter Quick-Step Metal Surface Finishing System meets all your finishing needs - whether blending in welds, cleaning surfaces, refining and enhancing existing finishes, or bringing out a mirror finish on stainless steel, steel, aluminum or any other ferrous and nonferrous metals.
|
|
Walter Abrasives - Walter Ripcut - High Performance Cutting with Abrasive Cut-Off Machine wheels are formulated for use on stationary cut-off machines, oto make more and faster cuts for the lowest possible cost per cut.
|
|
Walter Abrasives - Walter Sanding Discs are constructed with highest quality fibre backing to withstand the centrifugal forces of high speed sanding. Job matched abrasive grains are applied and imbedded in the resin bond by an electrostatic process to deliver the best cutting edge to the surface for a uniform grain coverage and consistent quality finishes.
|
|
Walter Abrasives - Walter Saucer Cup Brushes - for Angle Grinders combine the advantages of both wire cup and wire wheel brushes. They feature a unique saucer cup shape which allows them to work in hard to reach spots like inside corners, edges and contours.
|
|
Walter Abrasives - Walter SST Icecut annular cutters are guaranteed to drill 2 to 3 times more holes and in less time than any other annular cutters. They produce perfectly machined, burr-free holes every time.
|
|
Walter Abrasives - Walter Stainless - Superior Grinding and Cutting wheels are excellent for use on all nickel alloyed steels in tough and demanding applications. They are made with highly refined ingredients which do not contain iron, sulfur or chlorine (Fe, S, CI) and will not contaminate stainless steel.
|
|
Walter Abrasives - Walter Toughcut - High Performance Cutting with Angle Grinder and Circular Saws are made with the characteristics of these tools in mind. they cut fast and free with binding, minimizing the load on the tool to maintain high RPM for a clean cut and best all around performance.
|
|
Walter Abrasives - Walter Twist Quick Change - Metal Surface Finishing System makes changing discs easy and fast, eliminating downtime and maximizing productivity. This range of small grinding and conditioning discs is the ideal system for light to medium duty surface finishing of all ferrous and non-ferrous metals.
|
|
Walter Abrasives - Walter Twist System air Angle Sanders are recommended if air is the power source of choice. They incorporate the most desirable features yet are light and powerful, the right combination for easy handling and efficient finishing work in a wide range of applications.
|
|
Walter Abrasives - Walter Two-in-One Flap Wheels combine two finishing steps in one. They remove material nearly as fast as a flap wheel while leaving a uniform satin finish. For use on a wide variety of materials.
|
|
Walter Abrasives - Walter Wire Cup Brushes - for Angle Grinders are designed for high performance flat surface brushing of large areas. They are made from top quality wire that is precisely positioned for perfect balance and smooth but aggressive and fast brushing action. All cup brushes are equipped with threaded arbors for quick and easy mounting.
|
|
Walter Abrasives - Walter Wire Wheel Brushes - for Angle Grinders are used for working in grooves and for heavy duty surface brushing. They are made from top quality wire that is tightly knotted and each tuft is precisely positioned and set for perfect balance and vibration free operation. The narrow face contact gives the highest impact and fast material removal.
|
|
Walter Abrasives - Walter Wire Wheel Brushes - for Bench and Pedestal Grinders are made from the highest industrial quality wire, perfectly balanced for smooth running and long life. They are most commonly used to remove paint, rust and corrosion, for light deburring and similar cleaning jobs.
|
|
Walter Abrasives - Walter Zip - High Performance Cutting and Grinding with Straight Shaft and Die Grinder wheels are formulated for high performance cutting, notching and grinding. They are made from highly refined ingredients which will not contaminate stainless steel.
|
|
Walter Abrasives - Walter Zip - High Performance Cutting with Depressed Center Wheels are formulated for the most demanding cutting applications in steel or stainless steel.
|
|
Walter Abrasives - Walter Zip Wheel - High Performance Cutting with Angle Grinders and Circular Saws cut faster, freer and cooler requiring less power than any other thin cut-off wheel. They are reinforced for extra safety but are very flexible and resilient to resist twisting and bending and will give a true and straight cut every time.
|
|
Osborn Wire Brush - Osborn Wheel Brushes are ideal for removal of material, flash, rust, paint, cleaning weld bead, deburring, deflashing, edge blending, skiving and buffing. Osborn Wire Brush - Osborn Wheel Brushes are produced in a full range of diameters, with a selection of operating face widths to perform almost any finishing task.
|
|
Osborn Wire Brush - Osborn Cup Brushes are made in three different types: knotted steel and stainless steel wire for heavy duty, crimped wire for lighter surface preparation and deburring, and ATB filaments for finishing work. Osborn Wire Brush - Osborn Cup Brushes are easily mounted on CNC machines and portable tools, air or electric powered.
|
|
Osborn Wire Brush - Osborn End Brushes are designed to have the ends of the fill strands do the bulk of the work, however the sides can also be used to finish vertical surfaces that parallel the shaft. Osborn Wire Brush - Osborn End Brushes are made in knot, crimped, and straight wire of carbon and stainless steel, brass, ATB filaments and other non-metallics, and are especially suitable for CNC machines, portable air and electric tools in tight spaces.
|
|
Osborn Wire Brush - Osborn Internal Brushes are primarily used in CNC machines, portable tools and drill presses for cross hole deburring and fast cleaning and finishing of inaccessible surfaces such as small diameter bores and internally threaded surfaces. Osborn Wire Brush - Osborn Internal Brushes are made in steel, stainless steel, brass, nylon and ATB filaments.
|
|
Osborn Wire Brush - Osborn ATB Abrasives Nylon Brushes are designed specifically for mechanical finishing tasks such as deburring, sharp edge removal, radiusing, edge contouring, de-fuzzing, surface refinement and conditioning, plateau finishing, blending imperfections, reduction of surface stresses and micro crack propagation, cleaning, polishing and surface wiping prior to inspection gauging.
|
|
Osborn Wire Brush - Osborn Wide Face Brushes are designed for surface conditioning, finishing, scrubbing and cleaning of metal coil and sheet stock, shaped products, and specialties such as printed circuit boards. Osborn Wire Brush - Osborn Wide Face Brushes can also be used on annealing/pickling, galvanizing, paint coating, and other large area, high production lines.
|
|
Osborn Wire Brush - Osborn Abrasives high-quality line of cut-off, grinding, combination wheels and flap discs offer strength, durability, speed, convenience and economy to every job.
|
|
Osborn Wire Brush - Osborn Maintenance Brushes offer a complete line of industrial janitorial products designed for fast, efficient and thorough cleaning, scrubbing and washing jobs.
|
|
Osborn Wire Brush - Osborn Paint Brushes offer quality and dependability for maximum value and performance on all industrial and professional painting jobs.
|
|
Osborn Wire Brush - Osborn Economy Brushes are designed as an economical alternative to high-value Osborn brushes. Osborn Wire Brush - Osborn Economy Brushes offer consistent quality that outperforms other DIY and professional power brush lines.
|
|
Standard Abrasives - Coated & Bonded Abrasives include high performance cartridge rolls, cross pads, cut-off wheels, flap discs, overlap cloth discs, psa discs, quick-change and resin fiber discs, slotted cloth discs, large and small flap wheels, shop rolls, cloth and paper sheets, spiral bands, square pads and tapered cone points. Standard Abrasives offers their coated abrasive products in aluminum oxide, zirconium, ceramic and silicon carbide grains.
|
|
Standard Abrasives - Non-Woven Abrasives products include surface conditioning bands, surface conditioning belts, buff & blend circle buff, combi-wheels, cross buffs, combi-cross buffs, buff & blend discs, cleaning discs, edge pro surface conditioning discs, felt polishing discs, surface conditioning flap discs, surface conditioning discs, unitized type 27 wheels, buff & blend mounted and unmounted flap brushes, hand pads and power pads, hook & loop glove kits, unitized mounted points, buff & blend rolls, surface conditioning FE stars, buff & blend wheels, convolute wheels and unitized wheels.
|
|
Standard Abrasives - Hardware and Adapters are made of the highest quality materials. They include adapters for flap wheels, holder pads, flange adapters for convolute wheels and flap brushes, holder pads for hand pads, edge pro, hook & loop, large diameter hard face, psa and small diameter discs, mandrels for cartridge rolls, circle buffs, cross buffs, cross and square pads, disc pads, P.A.R.T. discs, plain, slotted and overlap discs, tapered cone points and unitized wheels, reducer bushings for flap wheels and rubber drums.
|
|
Standard Abrasives - Mini Test Kits include Standard Abrasives Mini Laminated Disc Kit, Standard Abrasives Mini Cross Buff Kit, Standard Abrasives Mini Track Cleaning Kit, Standard Abrasives Edge Pro TR Promo Kit, Standard Abrasives Quick Change TR Variety Kit, Standard Abrasives Surface Conditioning Mini FE Disc Kit, Standard Abrasives Unitized Wheel Variety Kit, Standard Abrasives Unitized Mounted Point Kit, Standard Abrasives Paint & Anodized Removal Tools(P.A.R.T.)Kit.
|
|
CS Unitec offers professional power tools and abrasive accessories for surface finishing on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.
|
|
CS Unitec offers professional power tools and abrasive accessories for surface finishing on steel, stainless steel, aluminum and other metals, as well as rigid plastics and wood.
|
|
CS Unitec offers the most complete range of lightweight portable diamond core drilling machines and rigs. Ideal for drilling holes in floors, walls, ceilings, and all concrete anchoring systems. Easy to use for fast drilling of reinforced concrete, concrete, brick, block and stone. All drills are equipped with a "slip clutch". Models are available for wet or dry drilling.
|
|
CS Unitec portable magnetic drills are ideal for drilling structural steel and virtually any metal. They offer the most compact and powerful series of portable magnetic drills for holes up to 5" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. The complete product line includes electric, pneumatic and hydraulic.
|
|
CS Unitec Rotary Hammer Drills are ideal for drilling holes in concrete, brick and masonry, as well as straight drilling of steel and wood. The safety clutch protects against overloading and jamming.
|
|
CS Unitec portable saws and tools are ideal for cutting pipe, structural steel, tanks, bolts, angle iron, concrete and other materials, including plastic and wood. They offer the widest range of portable pneumatic, electric and hydraulic saws.
|
|
