  | *Click on a logo of your choice |  | *Click on a logo of your choice |  |  |   | Product Catalog
|
Trim-Kut discs are made of premium aluminum oxide grains bonded to a special, durable polymer backing.This special backing enables the discs to be used without a backing pad. The aggressive grinding action in combination with the cool cutting results in a rapid stock removal for many different applications. Trim-Kut discs may be trimmed as needed to expose new grinding surfaces.
|
|
AA Abrasives flap discs are made with premium zirconia alumina grain for fast stock removal. They have a long life and stay sharp for 10-15 times longer than conventional fiber discs. They provide cooler grinding and finishing in one step. They have a low noise level and lightweight design. No back up pad is required for use on portable disc grinders and sanders. Very little surface pressure is needed. They are easy to use and cost effective. Made in USA.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
FilmBac PSA Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These individually tabbed discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Made with premium aluminum oxide grain, gold stearate, these are the most efficient disc roll packages available. Their non loading pressure sensitive paper significantly decreases grit or dust contamination. Their durable backing provides a long shelf life. They are available with or without vacuum holes. Made in USA.
|
|
FilmBac Hook & Loop Discs are designed for sanding wood, metal, paint, fiberglass, and plastic. These discs are made of our finest quality Aluminum Oxide grain bonded to a tear resistant film backing and are used on a variety of random orbital or low speed DA sanders. More durable than paper backed discs with minimal mineral shelling. Special stearated coating resists loading.
|
|
Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
1/4-20" shank allows for quick spin-on and spin-off mounting. Tough but flexible aluminum oxide resin bond flaps make these wheels ideal for many applications such as deburring, finishing, polishing and cleaning. Designed for use in die grinders, flexible shaft tools and high speed portable drills. Designed for use on many different materials. Examples include, metals ferrous and non-ferrous, fiber glass, plastics, wood and rubber. Mounted flap wheels produce a uniform, consistent finish. Safe maximum RPM ratings are indicated on each wheel.
|
|
Unmounted flap wheels are perfect for delivering a consistent uniform finish on large pieces. They are designed for use on flexible shafts, slow speed straight or bench grinders. Safe maximum RPM ratings are indicated on each wheel.
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending.
|
|
AA Abrasives cartridge rolls are made with aluminum oxide grain and are resin bonded. Their multi-layer construction reveals new abrasive cloth materials as the outer layer wears through. They are perfect for internal and external finishing operations, and ideal for deburring, tool mark removal, cleaning and blending. They are securely and uniformly wound to create a balanced tool with a true center. They are perfect for finishing jobs with channels, irregular contours and angles. They are economical and fast cutting.
|
|
No Lap Bands are made with aluminum oxide grain and resin bonded. They are perfect for finishing curved and contoured surfaces. For use with expanding rubber drum.
|
|
Sharp, fast clean - aluminum oxide grain cutting abrasive material used for polishing, finishing, sanding, deburring and other maintenance associated with tool and welding shops. Flexible cloth backing allows you to tear to the desired length. Excellent for contour work, and turning parts in lathes. Each roll is in a durable cardboard box. Easy to dispense material and convenient to store.
|
|
Aluminum oxide cloth sheets are excellent for general clean up on metal and wood surfaces. They outlast paper sheets 4 to 1. They have a flexible durable backing and are water resistant.
|
|
Emery cloth sheets are close coat construction and are made of emery grain. They have a cloth backing which is very flexible. They are excellent for cleaning and polishing metal surfaces. They are also used on wood.
|
|
Crocus cloth sheets are made of a natural mineral used for extremely fine finishing and polishing on metals, plastics and woods. They have a flexible cloth backing.
|
|
Silicon carbide waterproof paper is best for wet and dry sanding of metal, paints and plastics. It leaves an excellent finish on most precious metals. It has a long life and is economical.
|
|
Silicon carbide stearate coated paper sheets reduce loading of material and are excellent on wood, plastics and metals.
|
|
Garnet finishing & cabinet paper leaves an excellent finish on woods. It has a medium aggressiveness. It has
a long life and is economical.
|
|
Aluminum oxide and cabinet paper is excellent for wood sanding. It is aggressive and economical.
|
|
Silicon carbide screen cloth is excellent on plaster or speckle. It reduces loading of material and can be used wet or dry. For use on copper tubing and non-ferrous metals.
|
|
Aluminum oxide belts are resin bonded, and have tear and break resistant joints. They are excellent on all metals and hard woods. They are also available for soft woods.
Aluminum oxide Y-Wt open coat poly/cotton material have a specially coated backing which provides high performance for washable belts. The high rigidity retention resists softening wash after wash. They are great for hard and soft woods and soft metals.
Aluminum oxide J-Wt premium cotton belts are flexible enough for most contour surfaces. They are made of egyption cotton which allows the belt to last longer. The premium heat treated grain allows sharper cutting and more consistent finishes. Great on non-ferrous metals,such as aluminum and brass, hard woods, and plastics.
Aluminum oxide J-Wt plus belts are made of 100% egyption cotton and have a grinding aid which not only cools, but acts as an anti-clogging agent. J-Flex belts will conform to highty contoured surfaces and provide superior finishing and polishing. They are excellent for chrome, stainless steel, brass, titanium, bronze and hard woods.
Silicon carbide waterproof Y-Wt polyester belts are designed for the heavy duty, more abusive applications. They are 100% waterproof and are sharp cutting. They are used on non-ferrous metals, marble, plastic, glass, rubber and fiberglass.
Zirconia alumina belts are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
Zirconia alumina plus belts have a grinding aid for a cooler cut and faster stock removal on stainless steel. They are resin bonded and closed coated. They are aggressive and self sharpening. They are excellent on stainless and other tough metals.
|
|
AA Abrasives offers a full line of floor sanding and finishing products. They are made of the highest quality grains and strongest backings in the industry. Our floor products resist loading and tearing. We offer items for most manufacturers of floor machines at great savings. Click above For:
Floor Rolls
Floor Paper discs
Floor Sheets
Floor Screen Discs
Sanding Belts for Floor Machines
|
|
AA Abrasives Hand Pads are extremely comformable and are an excellent alternative to steel wool. They are non-rusting and non-loading, and are excellent with solvents. They provide a uniform, clean finish and are perfect for blending grains. They are excellent on all types of metal and are defuzzing on wood products. They are reusable and color coded.
|
|
AA Abrasives non-woven rolls are helpful when longer lengths are required for your manual or machine operations. Excellent cost effective alternative to hand pads.
|
|
AA Abrasives Strip-It products, (Lava Wheels), are made of abrasive grains and resins which are bonded to a strong nylon filament, which resemble black lava. They are recommended for aggressive mechanical cleaning operations. The pourous structure of this product allows for reduced loading and a cooler cut. They are excellent for providing consistent surface finishes. Applications include but are not limited to metal working, fiberglass, plastic, automotive, marine, and cleaning of cement and stone.
|
|
|
|
|
|
Rex-Cut cotton reinforced wheels are designed to be used for a variety of applications where metal removal and a nice finish is required. Their special bond differs from conventional bonded abrasives which enables them to grind and finish metals at the same time.
GFX Bond
GFX bond is designed for fine finishing, blending and polishing applications on ferrous and non-ferrous metals. GFX bond is resilient for use on contours and resists loading. These wheels are ideal for stainless steel applications.
MTX Bond
MTX Bond is designed for light or medium weld removal. MTX bond is resilient for use on contours and flat surfaces. User can easily control cutting rates by amount of pressure applied. They resist loading and offer excellent finishes for grinding aluminum and other ferrous materials. They are excellent on aluminum.
|
|
|
|
AA-Flex wheels offer one step grinding and finishing. They are constructed of aluminum oxide grains bonded to a strong, slightly flexible fiberglass reinforcing and have dimples on the grinding surface. AA-Flex wheels will remove stock much like a resin bond depressed center wheel and finish like a resin fiber disc. Excellent on stainless steel and aluminum.
|
|
AA Abrasives Premium Aluminum Oxide Threaded Plug and Tapered Wheels are resin bonded. A16R and A20R grains are designed for tougher metals where consistent stock removal and wheel life is important. Designed for hard to reach areas. A16R and A20R grains are our most popular sellers. Designed for high RPM grinders. Made in USA.
|
|
AA Abrasives resin bonded mounted points are made of premium aluminum oxide and designed for a high RPM die grinders. They are excellent for weld removal on hard to reach areas on metal and stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
The shape of the wheel is determined by the shape, size, and accessibility of the part to be ground. When grinding peripheral cutters, cup wheels are used. Dish wheels are best for formed cutters.
WA White Premium Aluminum Oxide
Used when a good cutting action is needed on all steels. When a sharp corner or radius must be held, use fine grits combined with J 0r K hardness.
GC Green Silicon Carbide
Used for non-ferrous metals such as cemented materials.
AS3 Ceramic
Our AS3 wheels feature a 30% advanced Cubitron 321 ceramic content combined with a 20% premium pink aluminum oxide grain and 50% white aluminum oxide grain that delivers cooler cuts on harder surfaces for maximum performance and life. This unique combination continually fractures, producing sharp new grinding points. Best used when heavy stock removal is necessary. Ceramic wheels are designed to grind without burn and hold form much better. They are excellent for corner and form holding applications. They exceed standard wheels when grinding materials 50 Rockenell C and harder. They're ideal for hardened tool steels, sprayed metal coatings, Iconel, Waspalloy, Hastalloy, Stellite and other high-temp alloys. In tool room applications, the AS3 will yield better results in dry grinding than conventional abrasives. They allow heavier downfeeds and faster traverse rates. Dressing is only required to restore the shape of the wheel. ISO 9002 certified quality.
|
|
AA Abrasives vitrified mounted points are made from premium pink aluminum oxide grain for fast cutting and clean finishing. They are precise dimensions, balanced and securely mounted to 1/4" or 1/8" steel shanks. Applications include deburring, tool sharpening, finishing cavities and removing mold marks and parting lines. In stock.
|
|
AA Abrasives brand wire wheels are manufactured with state of the art technology and materials. They are quality tested and out perform most major brand name wire wheels. They are an excellent option for the cost conscience consumer who isn't willing to sacrifice quality. Most heavy duty manufacturers stay with our brand after evaluating their cost per piece count.
|
|
All carbide burrs have a 1/4" shank. All burrs with a 1/4" diameter and under are solid carbide, all burrs over 1/4"" diameter have hardened steel shanks. A super cut is standard on all burrs. Resharpening and extra long shanks are available. All burrs provide an accurate and precise cut.
|
|
Our backing pad is specially designed to allow air flow behind the sanding disc, substantially increasing the life of the disc. Note: Thread sized for backing pads and disc nuts are available on special orders. Please specify model number and machine make on which accessories are to be used.
|
|
Our disc holders are constructed of soft flexible rubber. This allows for flex and consistency when needed without digging or deforming.
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with 3M Roloc System
|
|
Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with Norton Speed-Lok System
|
|
Hook & Loop disc holder have a tight loop grip surface engineered specifically for paper sanding discs. They are easy to use, quick changing, and excellent on flat and contour surfaces.
|
|
Adapter shanks for 1/4-20 threaded mandrels are made of hardened steel and are reusable. They extend shank length wear.
|
|
For use with AA Abrasives Cartridge Rolls, hardened steel with plated finish. All mandrels have a 1/4" shank. Designed for high speed drills and die grinders. Made in USA.
|
|
For use with AA Abrasives No Lap Bands. Speed balanced for high performance. Made from 60 durometer live rubber which enhances controlled expansion. Designed for high speed drills and die grinders. Made in USA.
|
|
Hook & Loop style back up pads have a loose loop grip surface engineered specifically for surface conditioning discs. They are easy to use and quick changing. They are excellent on flat and contour surfaces.
|
|
AA Abrasives reusable adapter assemblies can be used for 7" and 9" type 27 or type 28 depressed center wheels. They have a 5/8-11 thread and heavy duty construction. They are simple to use and cost effective.
|
|
Mandrels are designed for wheel widths up to 1/4". The body and screw head have a 3/4" diameter. The overall length is 2-1/2".
|
|
Type-R back up pads are interchangeable with 3M Roloc System. They operate at a high RPM and are ideal for die grinders and flexible shafts. They have a tough 1/4" steel shank.
|
|
|
Dynafiles (I, II, III), Mini-Dynafile, Electric Dynafile, Dynabelter, Dynangle
|
|
|
Buffer, Buffer/Polisher, Buffer/Sander, Sander/Polisher, Gear-Driven Orbital Sander, Wet Orbital Sander
|
|
|
Mini Dynishers, Dynishers, Dyingers, Dynafines, Dynastraights, Lightweight Dynastraights, Slow-Speed Dynastraights, Extension Dynastraights
|
|
|
Dynabrade Drills, Dynabrade Routers, Dynabrade Cut-Off Tools, Dynabrade Descaling Tools, Dynabrade Reciprocating Tools
|
|
|
Pencil Die Grinders, Versatility Grinders, Die Grinders, Straight & Right Angle Collet Die Grinders, Extension Die Grinders, Center Wheel Grinders, Cone or Plug Wheel Grinders, Type 1 Wheel Grinders, Slow-Speed Collet Die Grinders
|
|
|
Mini-Dynaorbitals, 3" Random Orbitals, 3-1/2" Random Orbitals, 5" Random Orbitals, 6" Random Orbitals, 11" Random Orbitals, Two-Hand Random Orbitals, 1-1/4" Random OrbitalS
|
|
|
2"-3" Disc Sanders, Dynalines, Dynabug Model T Sanders, 4"-7" Disc Sanders, Gear Driven Orbital Sanders, Dual Action Sanders, File Board, Dynabug II
|
|
|
3-1/2", 5" and 6",
Vacuum and Non-vacuum
|
|
|
Premium Random Orbital Disc Pads, Value Random Orbital Disc Pads, Random Orbital Disc Pads, Random Orbital Disc Channel-Vac Pads, 5", 6", & 8" Gear-Driven Orbital Sanding Pads, Mini-Dynaorbital Disc Pads, Dynaline/Dynabug Sanding Pads, Dynabug "Model T" Sander Pads, Dynabug II Sanding Pads, Interface Pads, Pad Conversions, Dynapad Locking-Type Sanding Pads, Dynafine Detail Sanding Pads, Dynafine Finger Sander Platen Pads, 2"-4" Diameter Disc Pads, Wet/Dry Disc Pads, Polishing Pads, Cotton Buff Wheels,
Platen Pads, Dynacushion Pneumatic Wheels, DyanWheels, Dynaflex Expander Wheels, Dyanswivel Air-Line Connectors & Composite-Style Couplers, Contact Wheels & Assemblies, Dynuba Products, Leveling Jacks
|
|
Polishing narrow areas with abrasive of buffing compound.
|
|
Use with a holder on blind, threaded holes.
|
|
Holder enables reverse rotation of brush.
|
|
|
Provide more flexibility than a knot wire brush for aggressive cleaning action in corners.
|
|
Maximum aggression for cleaning in corners.
|
|
General purpose applications. Can be mounted in multiples.
|
|
|
For cleaning and deburring off-hand or on a drill press.
|
|
Narrow Face Crimped Wire Wheels for light-duty brushing action.
Wide Face Crimped Wire Wheels cover a broader surface area.
|
|
Nylon is resistant to most chemicals and displays excellent bend recovery.
|
|
For light to medium duty, general purpose cleaning of large surfaces.
|
|
Untreated Tampico has excellent liquid retention and is highly resistant to heat, solvents and chemicals.
|
|
Maximum impact for extremely severe applications.
|
|
The banded design on the double row knot brush provides maximum aggression.
|
|
For aggressive action in severe applications.
|
|
Use with power tools for heavy-duty cleaning and deburring.
|
|
For light duty, general purpose applications.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
Banded brushes provide shorter trim for maximum aggression.
|
|
Accommodates the natural working angle; for broad range of surfaces and contours.
|
|
Banded brushes provide shorter trim length which prevents flaring and provides more aggressive brushing action.
|
|
3/8" Trim Length - For rivet-hole cleaning operations in aircraft and aerospace industries.
|
|
For cup or wheel brushes.
|
|
Constructed for superior performance and high aggression in demanding applications. For automatic and semi-automatic equipment, Ideal for gear deburring.
|
|
|
For light cleaning and deburring.
|
|
|
Nylon is resistant to most chemicals and displays excellent bend recovery.
|
|
Silicon Carbide. Used to maximize brush conformability on irregular part shapes.
|
|
A lower price, commercial grade brush for general purpose applications.
|
|
A lower price, commercial grade brush for general purpose applications.
|
|
Used for centering 10", 12" and 14" Nylox Wheels when gang mounting.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Black Elastomer* - Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Light-duty brushes for cleaning in small holes and confined areas.
|
|
Extra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
|
Burgundy Elastomer* - Standard. Orange Elastomer* - Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Black Elastomer* - Estra Heavy-Duty. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life. For hot pass through cap pass weld cleaning.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
Burgundy Elastomer* - Standard. Elastomer gradually wears exposing consistent short trim for maxiumum aggression and long life.
|
|
Burgundy Elastomer* (Standard). Elastomer gradually wears exposing consistent short trim for maximum aggression and long life.
|
|
For brushing joints or cleaning cracks in concrete and asphalt; preparing expansion joints for filing and sealing. Used on walk-behind machines.
|
|
For line traveling machines.
|
|
Use fully chucked on smooth of threaded blind holes.
|
|
For cleaning hole sides and bottom in a single step.
|
|
General Duty. For fast, efficient cleaning of large surfaces.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
Rugged knot-type construction provides aggressive, high-impact action for severe applications.
|
|
For hard-to-reach areas; primarily for weld cleaning
|
|
Eye Handle - Use for manual cleaning applications.
|
|
Maximum wire density and aggression, covers more surface area in a single pass.
|
|
Greater fill density and more aggressive brushing action. Can be mounted in multiples.
|
|
Flexible brushing action. Can be mounted in multiples.
|
|
Flexible brushing action.
|
|
General purpose brushes for use on grinding equipment requiring a narrow face width.
|
|
Silicate filament for ultra-fien deburring and cleaning of small internal holes.
|
|
|
Untreated Tampico has excellent liquid retention and is highly resistant to heat, solvents and chemicals.
|
|
For general purpose applications on large surface areas.
|
|
Single Stem, Single Spiral, with Handle
|
|
Ideal for external pipe cleaning. For automatic and semi-automatic equipment.
|
|
Ideal for producing antique or fien satin finishes on precious and non-ferrous metals.
|
|
Covers more surface area in a single pass
|
|
For 6" & 8" Brushes. Used in pairs & priced per pair.
|
|
Used on descaling equipment.
|
|
Protects the work surface from being scratched or marked.
|
|
Ideal for light cleaning on relatively large areas.
|
|
Polishing relatively large areas with abrasive or buffing compounds.
|
|
Ideal for light cleaning and deburring in confined areas.
|
|
Ideal for polishing in confined areas.
|
|
Plastic ferrule protects molds and dies during interior polishing.
|
|
Ideal for deburring and finishing in confined areas.
|
|
Loop Handle, Straight Black Nylon Fill
|
|
Straight White Nylon Fill
|
|
Used to maximize deburring action and minimize cycle time.
|
|
|
Prevents smearing. Improves the finish. Lowes costs.
|
|
Standard 3/4" Diameter Shaft, 2" Long
|
|
|
Includes drive arbor, set screw and hex key.
|
|
Used on the ends of a gang mount. Used in pairs and priced per pair.
|
|
Mounts Weiler disc brushes to any type of milling machine or CNC machine.
|
|
Maximum aggression and long life.
|
|
Smooth grinding action and long life.
|
|
For use with Tiger, Vortec Pro and High Density Flap Discs.
|
|
High cut rate at a value price.
|
|
Increased conformability and maximum life.
|
|
|
For Dynafile, Dynafile II, Mini-Dynafile II and Dynafile III
|
|
|
60 Grit: For maximum cut rate
80 Grit: For superior finish
|
|
|
Zirconium Grain - Plastic Backing
|
|
|
For mounting 2" & 3" BobCats on tools with 1/4" collets
|
|
|
Convenient hang-card makes increasing poin-of-purchase sales easy!
|
|
|
Compatible with Norton Speed-Lok TS back-up pads.
|
|
Compatible with 3M Roloc back-up pads.
|
|
A premium line designed to provide long life. Ideal for medium to high production environments.
|
|
|
A price line designed to provide fast cutting action. Ideal for low to medium production environments.
|
|
Used in pairs and priced per pair.
|
|
One roll per box.
|
|
For rough grinding applications on various metals.
|
|
For root pass grinding, light grinding and cutting.
|
|
For fast, burr-free cutting of various metals.
|
|
For a wide range of metal-cutting applications.
|
|
For electric or air die grinders and angle grinders.
|
|
|
For electric or air die grinders.
|
|
|
For 1"-3" Type 1 Wheels only
|
|
For toolroom and machine shop use
|
|
For circular saws
|
|
For stationary machines
|
|
For portable gas or electric saws
|
|
For low horsepower chop saws
|
|
Series 2 - Cleaning & Finishing - Hardness: Soft
Series 3 - General Purpose - Hardness: Medium
Series 6 - Deburring - Hardness: Medium/Hard
Series 8 - HD Deburring & Polishing - Hardness: Hard (Heavy-Duty)
|
|
MRO/General Purpose - For general cleaning and finishing
Deburring Wheels - For deburring and edge blending
|
|
Compatible with 3M Roloc back-up pads.
|
|
Hardwood Block
Heavy-duty brace included with all brooms.
|
|
Synthetic Foam Block
|
|
Synthetic Foam Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Economy brushed provide lasting, efficient service at minimal cost.
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
|
|
Lacquered Hardwood Block
Economy brushed provide lasting, efficient service at minimal cost.
|
|
For applying blacktop driveway and parking lot dressings, asphalt, sealers or roof coatings.
|
|
Hardwood Block
Wide flared ends for sweeping close to curbs and walls.
|
|
Hardwood Block
For sweeping or scrubbing concrete or stone floors, driveways, etc. Ideal for sweeping heavy chips and debris.
|
|
Quality hardwood handles with clear lacquer finish.
|
|
Reinforced, heavy-duty metal handles are available in two colors and optional foam cover.
|
|
|
Use telescoping handles to shorten or extend the reach of the handle. Use fountain tube handles when a continuous flow of water is needed, i.e. car/truck washing.
|
|
Featuring the honeycomb core.
Fiberglass handles are stronger than wood or metal. Virtually indestructible.
|
|
Angled trim allows access to corners, under low cabinets and other hard-to-reach areas.
|
|
Metal top for added durability. Ideal for wet or dry applications.
|
|
For light-duty spot sweeping.
|
|
|
For fast, efficient clean-up.
|
|
24" Overall Length
Ideal for cleaning radiators and narrow, hard-to-reach places.
|
|
|
For dusting ceilings, valances, high moldings and other hard-to-reach places. Twisted-in-wire construction with plastic handle.
|
|
Heavy-duty construction, iron handle socket.
|
|
Rust-proof handle socket and frame.
|
|
Two tapered handle holes
|
|
|
Protective bumper - Foam block with two handle holes.
|
|
Easily sweeps between school bus seats.
Lacquered hardwood block with one threaded handle hole.
|
|
The bi-level design allows the brush to stay in contact with the surface.
|
|
Wet & dry cleaning, prespotting, carpet touch-up, etc.
Shaped plastic handle.
|
|
For use in confined spaces
|
|
Foam block
|
|
Heavily filled for heavy-duty scrubbing
|
|
Excellent for scrubbing decks or floors. One threaded and one tapered handle hole.
|
|
For general scrubbing in factories, kitchens, institutions, etc.
|
|
Chemical and water resistant, will not warp or crack.
|
|
Designed for high temperature cleaning, ideal for food service.
|
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
|
Use for removing stubborn dirt, grime and mildew from tiled surfaces.
|
|
2" Trim Length
|
|
Hardwood handle
|
|
For valves, outlets, small tanks, beverage dispensers & coffee urns.
|
|
Industrial Grade
Hardwood handle with plated metal heads
|
|
Tie-on style, 4-ply cotton
|
|
Heavy-duty clamp-on style
|
|
Tie-on style, 4-ply cotton
|
|
Industrial grade
Mop head securely tied to handle.
|
|
One piece construction that will not rust, fade, crack, peel, chip, dent or warp. Wringer fits all sizes of plastic or metal buckets.
|
|
100% lambswool
Washes easily and dries quickly. Pads are easily changed.
|
|
For application of roof coatings.
|
|
For application of roof coatings.
|
|
Useful tools for applying cement, waterpaints and liquid waterproofing materials on masonry walls. Handle attached.
|
|
Two tapered handle holes allow user to choose the correct brush angle needed.
|
|
Detachable handle
For the application of Kalsomine, cold water, acid and water repellents to concrete and othe rough surfaces.
|
|
Hardwook block. Tapered handle hole.
|
|
Hardwood block. Ideal for creating texture to newly pured cement and for applying coatings on asphalt or concrete.
|
|
For texturing wall surfaces and ceilings. Lacquered heavy-duty wood block with one threaded handle hole.
|
|
Hardwood block. For smoothing wallpaper.
|
|
Hardwood blocks
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Hardwood blocks
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
.012 Steel Wire
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Hardwood block
For general cleaning in the plating, metal finishing, aircraft and missile industries. Also used with inert arc aluminum welding.
|
|
For rugged cleaning on bricks, stone and similar large flat areas.
|
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
For cleaning concrete forms and green concrete after forms have been removed.
|
|
|
A refill brush for most chipping hammers. Used for weld cleaning.
|
|
For cleaning chips, borings, solder, rust, dirt & corrosion from castings.
|
|
|
Waxed hardwood block
Use for file cleaning or to roughen and prepare surface material prior to sweating and soldering.
|
|
Small stiff wire brush for brushing hot metal. Can be exposed to flames without burning.
|
|
Filled with .012 round wire and fitted with 1/4" x 2" NPT pipe nipple. For internal cleaning of pipes and flues.
|
|
Wire fill
For internal cleaning and deburring of copper tube fittings. Also used in trucking and marine industries as a light socket cleaning brush.
|
|
One brush replaces 4! Steel wire. Cleans the outside and inside diameters of 1/2" and 3/4" tubes and fittings. Use for soldering prep, deburring, drill hole cleaning and cleaning battery terminals.
|
|
Stainless steel ferrule - Heavily filled
|
|
|
Steel ferrule.
Economy brushes provide lasting, efficient service at minimal cost.
|
|
|
Economy brushes provide lasting, efficient service at minimal cost.
|
|
Seamless nickel ferrule. Pointed tip - Round black handle.
|
|
Long, lacquered handle.
|
|
Ox hair - Single stroke - Round black handle.
|
|
Ox hair - Flat red handle.
|
|
Black china bristle - Chiseled edge - Clear lacquered handle.
|
|
Seamless aluminum ferrule. Camel hair - Round black handle.
|
|
Grey china bristle - Steel ferrule - Long foam handle.
|
|
Horsehair - Tin ferrule.
|
|
Stiff grey horsehair. Aluminum tube with cork to hold cleaning fluid. For cleaning electrical contact points.
|
|
China bristle - Seamless steel ferrule - Lacquered wood handle.
|
|
With hanger for coating applications in drilling operations.
|
|
For coating applications in pipeline construction.
|
|
Poly blend with phenolic core.
|
|
Poly blend with PVC core.
|
|
|
Poly blend with treated paper core.
|
|
Can be used with all paints. Ideal for trim and touch-up.
|
|
All metal with two plastic caps. Solid plastic handle with threaded grip.
|
|
Permits use of paint roller directly from a 5-gallon pail.
|
|
Can be used with all types of paint. Use on pipes, rails, fences and hard to reach areas.
|
|
